[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Tuning in VLF with a sound card

From: Marcus D. Leech
Subject: Re: [Discuss-gnuradio] Tuning in VLF with a sound card
Date: Wed, 15 May 2019 17:28:23 -0400
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0

On 05/15/2019 03:23 PM, Brad Hein wrote:
Great suggestion thank you! This also gives me new topics to read up on as I am still a VLF amateur. 

[Sent from mobile device]
I used a Berhringer "mini-MIC" microphone amplifier, which has a balanced, XLR, input, and has bandwidth out to
  about 90kHz.  Worked a champ.  Not as cheap as a DIY op-amp+transformer approach, but more convenient,
  to be sure.

On Wed, May 15, 2019, 1:20 PM John Coppens <address@hidden wrote:
On Thu, 2 May 2019 16:22:24 -0400
Brad Hein <address@hidden> wrote:

> I took a Raspberry Pi and attached a 48KHz USB sound card, with a big
> magnetic loop antenna fed into the mic.

Just a suggestion: If you have a loop antenna, which is a symmetrical antenna,
and couple it to an asymmetrical input (MIC), you will make the antenna
more sensitive to static noise. I'd suggest you use either a transformer or
an 'instrumentation amplifier' with an operational amplifier to convert
the signal from the antenna to asymmetrical signal.

A transformer would be easiest to install at the base of the antenna (no
need for a supply). The op-amp amplifier would cover a larger bandwidth.
(it would also offer some protection for your computer).


Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]