[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] [UHD] Release Announcement

From: Michael West
Subject: [Discuss-gnuradio] [UHD] Release Announcement
Date: Thu, 10 Jan 2019 13:47:07 -0800

UHD is now available. This is an ABI release on the UHD-3.13 branch.  It is API compatible with all 3.13.x.x releases.

Installers for Windows and Fedora are available here:

The PPA for Ubuntu will be available soon and will be found here:

The tag for this release is located here:

There have been 156 commits since the last release which can be viewed here:

Please report any bugs found on the UHD issue tracker:
* Please do not use the issue tracker for help or support.

Pull requests for direct code changes can be submitted to the UHD or FPGA repositories:


* E320: Fix front panel GPIO readback
* E320: Fix master_clock_rate setting
* E320: Print extra ouptut for ref_clock BIST
* E320: Fix gps_locked type
* E320: Fix return value of get_fpga_type()
* N3xx: Enable setting clock and time sources at runtime
* N3xx: Add ref_clock BIST
* N3xx: Improve set_time_source() and set_clock_source()
* N3xx: Add exception for init failure
* N3xx: Remove HA, XA images packages
* N3xx: Change init() procedure to reduce configuration time
* N310: Add frequency bounds
* N310: Fix RX antenna mapping
* N310: Add log messages when re-initializing dboards
* N310: Add skip_rfic argument to reduce time of BIST
* N310: Add initialization of TX bandwidth
* E310: Fix initialization of antenna and frequency values
* E310: Type-cast fix for Boost
* X300: Improve firmware compat error message
* X300: Updated niusrprio driver
* X300: Add recovery for duplicate IP addresses in EEPROM
* X300: Prevent duplicate MAC and IP addresses from being programmed
* X300: New mode to configure master clock rate
* X300: Implement RFNoC get antenna functions
* B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware
* B2xx: Revert changes to DSP core to fix scaling factor adjustment
* B2xx: Restore asynchronous reset of AD936x
        (fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors)
* TwinRX: enable ch1 lo amps if ch2 is using an external lo source
* TwinRX: Correctly initialize antenna mapping on X300
* TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs
* TwinRX: Fix initialization
* TwinRX: Tuning improvements
* TwinRX: Enable phase resync on ADF535x
* TwinRX: Make routing to LO1 and LO2 mutually exclusive
* BasicRX/LFRX: Fix real mode in rx_frontend_core_3000
* UHD: Define UHD_API as empty string when building static lib
* UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport
* UHD: Add support for NEON SIMD
* UHD: Fix usb_dummy_impl compilation in MSVC
* UHD: Reconcile time_spec operators with boost concepts
* UHD: Fix rounding in ddc/duc rate calculation
* UHD: Increase MPMD RPC timeout when calling set_time_source()
* UHD: Fix RX streamer SOB and EOB handling
* UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor
* UHD: Change SOVERSION to ABI string and VERSION to full UHD version
* UHD: Update cmake style to use lower case commands
* UHD: Improve logic for UHD_IMAGES_DIR
* UHD: Fix return value of get_rolloff() for filters
* UHD: Properly register devtest
* UHD: Fix log statement for Port number on RFNoC block
* UHD: Use "MATCHES" instead of "STREQUAL" for "Clang"
* UHD: Fix GPGGA string formatting for gpsd
* Device3: Set default block control response SIDs
* Device3: Fix block control flushing
* RFNoC: Improved flushing mechanism in noc_shell and dma_fifo
* RFNoC: Install missing dma_fifo_block_ctrl header
* RFNoC: Replace some [] with .at() in radio_ctrl_impl
* RFNoC: Fix graph traversal
* MPM: Add Git hash, version to device info
* MPM: Reset the RPC server upon reload
* MPM: TDC: Update PDAC BIST and flatness test to use latest APIs
* MPM: Fix handling of 0-valued dt-compat
* MPM: Fix GPSD sensor names for N3xx and E320
* MPM: Add args to update_ref_clock_freq to properly support dynamic setting
*      of clock and time references
* MPM: Fix Pylint warnings
* MPM: Identify sysfs gpios more generically
* MPM: Add lock_guard() function
* MPM: Factor E320 and N3xx BIST code into common module
* MPM: Add gpsd error handling
* MPM: Add FPGA git hash to device info
* MPMD: Increase RPC timeout during readng mb sensor
* MPMD: Improve error message for compat number mismatches
* Python API: Enable Python API on Windows
* Python API: Change .dll to .pyd for Win32
* Python API: Fixing Boost.Python initializer visibility
* Python API: Fix duration of benchmark rate
* Python API: Add missing constructors of time_spec_t
* Python API: Expose streamer timeouts
* Python API: Tighten the scope of releasing the GIL
* Python API: Add device_addr_t
* Python API: Populate the tune_result_t binding
* Utils: Many fixes and enhancements for uhd_images_downloader
* Utils: Update query_gpsdo_sensors to work on E310
* Examples: Removed some legacy code patterns from RFNoC examples
* Examples: Fix channel argument for rx_samples_to_file
* Examples: Fix benchmark_rate MIMO synchronization
* Examples: Add phase alignment example
* Examples: Fix RX antenna not being applied in txrx_loopback_to_file
* Test: Add more env vars, make Py3k compatible
* Test: Add multi_usrp_test.py to devtest
* Test: Clean up, refactor, and improve devtest
* Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest
* Test: Reduce sample rate for E320 1G devtest
* Test: Add unit test for eeprom_utils
* Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call
* Docs: Minor tweaks to the Python API manual page
* Docs: Add E320 test procedures
* Docs: Added TwinRX page
* Docs: Fix N210 MIMO Phase Alignment test command
* Docs: Add E320 information
* Docs: Improve sections on clock/time references
* Docs: Add section on X300 motherboard clocking
* Docs: Add more information on Salt for N3xx and E320
* Docs: Adjust E310 functional verification tests
* Docs: Add documentation on GIL release
* Debian: Update control files
* Images: Add N3xx CPLD file to manifest

As always, we at Ettus Research would like to thank all of the UHD users in the open source SDR community.  This release contains commits from users in the community that submitted pull requests against the UHD and FPGA repositories as well as many commits that are a direct result of issues reported back to us by users like you through the UHD and FPGA issue trackers, the USRP-users mailing list, and Ettus support.  You have all helped contribute to the continued improvement of UHD.  Thank you!

Best regards,

reply via email to

[Prev in Thread] Current Thread [Next in Thread]