discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Regarding correlate access code-tag block


From: Maitry Raval
Subject: Re: [Discuss-gnuradio] Regarding correlate access code-tag block
Date: Thu, 10 Jan 2019 16:17:41 +0530 (IST)

Hello,

Thanks for your time!

It works completely fine, now I understand that we have to give tagged stream 
at the input of encoder.


With Best Regards,
Maitry Raval,
R& D engineer|Azista Industries Pvt Ltd| 079-40605800|www.azistaaerospace.com

----- Original Message -----
From: "Cinaed Simson" <address@hidden>
To: "discuss-gnuradio" <address@hidden>
Cc: "Maitry Raval" <address@hidden>
Sent: Thursday, January 10, 2019 1:21:34 PM
Subject: Re: [Discuss-gnuradio] Regarding correlate access code-tag block

Hi Mailry - I was able to get it run.

I used the "correlate access" block from gnuradio - my installation of
gnuradio didn't like the block in your flowgraph.

And then I had to install the python module "construct" in order to get
the flowgraph to run.

In order to get the flowchart to work - at least in the sense of filling
up the output.txt file - I added a "Stream to Tagged Stream" block and
define a consist tag to get the Tag Debug block to work.

Also, I had to remove the "unpack" block before the PSK modulation,
added a "Unpack K=1" block just after the PSK demodulation - and I set
"Generate Options" to "No Gui" in the Options block.

-- Cinaed



On 1/8/19 12:40 AM, Maitry Raval wrote:
> Hello, 
> thanks for your guidance.
> I have also attached the grc file, input/output files and python file for 
> your reference. after adding tag debug, still didn't get any output. I have 
> also tried this same in ubuntu 18.04 with GNU radio 3.7.11 version.
> actually because these psk blocks are deprecated, I have tried it with dpsk 
> mod, demod block. But as I wanted to do continuous transmission, I didn't 
> find replaced block for correlate access code-tag block, and the cusom block 
> from gr-satellites are for extracting syncbits. 
> I have also tried with simple flow graph by just sream muxing 2 files one 
> with sync bits and other one is payload file and give that output to 
> correlate access code-tag block, but that also didn't work.
> 
> It would be grateful, If you guide me on this. I just want to make that sync 
> bits searching and extracting from payload and receive only payload at the 
> output. 
> 
> 
> With Best Regards,
> Maitry Raval,
> 
> 
> ----- Original Message -----
> From: "Cinaed Simson" <address@hidden>
> To: "discuss-gnuradio" <address@hidden>
> Sent: Tuesday, January 8, 2019 1:47:56 PM
> Subject: Re: [Discuss-gnuradio] Regarding correlate access code-tag block
> 
> I broke down and looked at the image.
> 
> Note, PSK Demod, Correlate Access Code - Tag, Packet Encoder, and Packet
> Decoder have been depreciated.
> 
> And they're usually depreciated because they have problems - and they
> are usually replaced with different blocks which work better and are
> typically more general.
> 
> The tutorials are good place to start looking for the replacements.
> 
> -- Cinaed
> 
> 
> On 1/7/19 11:22 PM, Thomas Lavarenne wrote:
>> Oh, it is "File Sink" not "Tagged file sink", didn't see sorry.
>>
>> Le mar. 8 janv. 2019 à 08:20, Thomas Lavarenne
>> <address@hidden <mailto:address@hidden>> a écrit :
>>
>>
>>
>>     Hi,
>>
>>         But, the issue is that correlate access code-tag block is not
>>         working and producing tags, so that my output file will come
>>         blank. as  I am certain that at the output of FEC extended
>>         decoder, both the sync bits and payload is available which I
>>         have seen by attaching file sink at the output of FEC extended
>>         decoder.
>>
>>
>>     There is a block "Tag Debug" to see if the tag is generated behind
>>     "correlate access code - tag block".
>>
>>     On the other hand, the documentation of "Tagged File sink" indicate
>>     that the block need the keyword "burst" (with value: True) to
>>     trigger the saving of the data.
>>
>>     Best regards,
>>
>>     Thomas
>>
>>     _______________________________________________
>>
>>         Discuss-gnuradio mailing list
>>         address@hidden <mailto:address@hidden>
>>         https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]