... [ 89%] Linking CXX shared module _trellis_swig0.so [ 89%] Built target _trellis_swig0 [ 89%] Built target pygen_gr_trellis_python_trellis_a71ba [ 89%] Built target pygen_gr_trellis_examples_python_c4b2e [ 89%] Built target gnuradio-uhd [ 89%] Built target tags_demo [ 89%] Built target _uhd_swig_doc_tag [ 89%] Built target uhd_swig_swig_doc [ 89%] Built target _uhd_swig_swig_tag [ 89%] Built target uhd_swig_gr_uhd_swig_5e3ce [ 89%] Built target pygen_gr_uhd_swig_5fcaa [ 89%] Building CXX object gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function ‘PyObject* _wrap_time_spec_t_get_system_time(PyObject*, PyObject*)’: /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:20194:16: error: ‘get_system_time’ is not a member of ‘uhd::time_spec_t’ result = uhd::time_spec_t::get_system_time(); ^~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*, PyObject*)’: /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:28428:15: error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’; did you mean ‘set_gpio_ddr’? (arg1)->set_gpio_debug(arg2,arg3); ^~~~~~~~~~~~~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, PyObject*, PyObject*)’: /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:29794:16: error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’; did you mean ‘set_gpio_ddr’? (*arg1)->set_gpio_debug(arg2,arg3); ^~~~~~~~~~~~~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function ‘void init_uhd_swig()’: /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:50154:91: error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’ SWIG_Python_SetConstant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int >(uhd::usrp::dboard_iface::ATR_REG_IDLE))); ^~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:50155:94: error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ SWIG_Python_SetConstant(d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int >(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY))); ^~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:50156:94: error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ SWIG_Python_SetConstant(d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int >(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY))); ^~~ /home/tross/prefix/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:50157:98: error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’ SWIG_Python_SetConstant(d, "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int >(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX))); ^~~ gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed make[2]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1 CMakeFiles/Makefile2:15167: recipe for target 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2 Makefile:160: recipe for target 'all' failed make: *** [all] Error 2 [ERROR] Build failed. See output above for error messages. [ERROR] Problem occurred while building package gnuradio: Build failed. [ERROR] Error installing package gnuradio. Aborting.