Re: [Discuss-gnuradio] Missing uhd_swig

[CEL]

Two things:

a) make sure you've not got leftovers of your previous UHD and GNU
Radio installation on your system. I know more than one guy who says
"/usr/local is my private playground, I wipe it once a week"; maybe
it's a good time to do that now.
b) you probably don't have to build UHD from source. Fedora 28 itself
comes with uhd-3.10.3.0. Same goes for gnuradio: Fedora ships gnuradio-
3.7.11, and if you want, you can try my own _experimental_ fedora
gnuradio packages[1] of gnuradio-3.7.13.3; they link against Fedora's
UHD.

Best regards,
Marcus

[1] https://copr.fedorainfracloud.org/coprs/marcusmueller/gnuradio/
On Mon, 2018-07-09 at 14:02 -0400, Mike Gilmer wrote:
> IIRC
> 
> I built from source both this time and previously (under Fedora 23)
> because the "package" would not build successfully.
> 
> Mike
> 
> On Mon, Jul 9, 2018 at 1:53 PM, Müller, Marcus (CEL) <address@hidden> wrote:
> > Hm, did you also build UHD from source on your old Fedora?
> > On Mon, 2018-07-09 at 13:46 -0400, Mike Gilmer wrote:
> > > I updated my Fedora version release 28
> > > 
> > > Afterwards I had to rebuild GNU radio (of course) to get GNU radio 
> > > companion to even load.
> > > I though my work was done, but now that I've tried to use GRC, I am 
> > > getting the following error when I go to "Execute":
> > > 
> > > ++++++++++++++++++++++++++++++++
> > > Generating: '/home/myself/dev/B210/top_block.py'
> > > 
> > > Executing: /usr/bin/python2 -u /home/myself/dev/B210/top_block.py
> > > 
> > > Traceback (most recent call last):
> > >   File "/home/myself/dev/B210/top_block.py", line 24, in <module>
> > >     from gnuradio import uhd
> > >   File 
> > > "/usr/local/lib64/python2.7/site-packages/gnuradio/uhd/__init__.py", line 
> > > 135, in <module>
> > >     _prepare_uhd_swig()
> > >   File 
> > > "/usr/local/lib64/python2.7/site-packages/gnuradio/uhd/__init__.py", line 
> > > 38, in _prepare_uhd_swig
> > >     import uhd_swig
> > >   File 
> > > "/usr/local/lib64/python2.7/site-packages/gnuradio/uhd/uhd_swig.py", line 
> > > 17, in <module>
> > >     _uhd_swig = swig_import_helper()
> > >   File 
> > > "/usr/local/lib64/python2.7/site-packages/gnuradio/uhd/uhd_swig.py", line 
> > > 16, in swig_import_helper
> > >     return importlib.import_module('_uhd_swig')
> > >   File "/usr/lib64/python2.7/importlib/__init__.py", line 37, in 
> > > import_module
> > >     __import__(name)
> > > ImportError: No module named _uhd_swig
> > > ++++++++++++++++++++++++++++++++
> > > 
> > > Any help appreciated.
> > > 
> > > Thanks
> > > Mike
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

smime.p7s
Description: S/MIME cryptographic signature