|
From: | Murray Thomson |
Subject: | Re: [Discuss-gnuradio] FSK transmitter tutorial |
Date: | Wed, 21 Mar 2018 13:51:32 +0000 |
I have a RTTY flow graph that you may find useful as a starting point. It's transmit only (I was just using it to test the RTTY decoder on the ICOM IC-7300 ham transceiver).
http://www.w6rz.net/rtty.grc
And a program to generate a baudot test file from a text file.
http://www.w6rz.net/baudot.c
Ron
On 03/20/2018 04:48 AM, Murray Thomson wrote:
Hi,
I would like to build an FSK modulator/demodulator. I'm using file sink/sources for the moment. I need to be able to specify the two frequencies, baud rate and sample rate (ideally at runtime).
I started with the gr-tutorial for qpsk, hoping to replace the modulation/demodulation with gfsk blocks, but I didn't get the result I was hoping for. I don't fully understand the gfsk module or how to change the frequencies after the modulation. I tried the fsk burst modem example, but it's not what I want. I would rather not use PDUs and I don't want to transmit in bursts.
I would really appreciate if someone could point me to a tutorial or example on this. These are the resources I have read so far:
https://github.com/gnuradio/gr-tutorial/blob/master/examples /tutorial7/mpsk_stage6.grc
https://nccgroup.github.io/RFTM/fsk_transmitter.html
https://www.reddit.com/r/GNURadio/comments/3u5zp2/gnu_radio_ gfsk_modulation_rate_deviation /
http://www.indigresso.com/wiki/doku.php?id=opentag:radios: testing_with_gnuradio
https://oshearesearch.com/index.php/2015/05/31/building-a- burst-fsk-modem-in-gnu-radio- with-message-lambda-blocks- and-eventstream/
Many thanks,
Murray
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |