Thanks for the response Bastian
I have taken a look at the IEEE 802.15.4 as suggested. I do see that
half sine pulse shaping is used according to the standard. However, I
believe the issue may be with my understanding of O-QPSK. I've attached
a picture that I use as a reference. I thought the key difference
between qpsk and o-qpsk is that due to the staggering of the imag
component by a half a symbol, o-qpsk can only result in 90 degree
transitions instead of the 180 degree variations seen in qpsk. I'm still
trying to understand why i'm seeing 8 constellation points from my
constellation sink and not the usual 4 that you would see in any o-qpsk
constellation plot. If any one has a good reference on this please share.
Tellrell
On Saturday, July 8, 2017 5:53 AM, Bastian Bloessl <address@hidden> wrote:
Hi,
On 07/08/2017 05:03 AM, Tellrell White wrote:
> Hello Guys
> I'm currently using the IEEE 802.15.4 PHY. I've added a random source to
> the flow graph and also a qt gui time and constellation sink. I have two
> questions, why does the constellation plot attached show more than the
> usual 4 constellation points seen in O-QPSK constellation?? Is it due to
> the sampling rate I'm using which is 8M in this case.
The default sampling rate is 4M, I don't know what you changed when you
tried to make it 8M. If you add a constellation sink to the unmodified
flowgraph you will see constellation points on the unit circle (your
second screenshot), which is what you would expect, since IEEE 802.15.4
uses O-QPSK with a half-sine pulse shape (see the standard).
>
> Also, I was curious as to if the vector source added which implements
> the half sine pulse shaping was creating a problem so I disabled it and
> I was able to see the expected 4 constellation points. So, is the source
> of extra constellation points I'm seeing?? I've attached both the .grc
> file and 2 screen shots, one representing both constellation plots
> discussed.
With this you removed the pulse shaping, so you see only the QPSK
constellations, but it's also not 15.4 anymore. Most standards use some
kind of pulse shaping, so you don't see only the constellation points
when you look at the final IQ signal. I don't understand why this is a
problem for you.
Best,
Bastian
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio