[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graph
From: |
Cinaed Simson |
Subject: |
Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs |
Date: |
Thu, 6 Jul 2017 21:51:30 -0700 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 |
On 07/06/2017 04:54 PM, Jozef Lošonský wrote:
> OK, again, python script is successfully created/written, and it is
> runnable outside of GRC, the errno13 comes from execve call which is
> incomplete, can you see that, please?
Send the flowchart and the python code if you want help.
-- Cinaed
>
> On Jul 7, 2017 01:27, "Cinaed Simson" <address@hidden
> <mailto:address@hidden>> wrote:
>
> On 07/06/2017 02:57 PM, Jozef Lošonský wrote:
> > I'm not behind my pc, but I think that it is possible to understand my
> > issue, that py file is generated from any flowgraph OK, but "play
> > button" press fails with Errno13 when "No GUI" (of course I'm not
> using
> > any WX or QT block in such case).
>
> Without at least an error message, e.g., Errno13, it's impossible to
> figure out what the problem is since your explanations make no sense.
>
> In fact, you've never indicated there was an error message.
>
> Typically, an Errno13 is a write permission problem - it's not a
> gnuradio or grc problem.
>
> And the error should have included
>
> Generate Error: [Errno 13] Permission denied:
>
> and then it prints out the location of where you're writing to.
>
> The obvious solution is to find another play to write the file.
>
> -- Cinaed
>
>
> >
> > On Jul 6, 2017 11:48 PM, "Cinaed Simson" <address@hidden
> <mailto:address@hidden>
> > <mailto:address@hidden <mailto:address@hidden>>>
> wrote:
> >
> > On 07/06/2017 02:14 PM, Jozef Lošonský wrote:
> > > Hi, there are no GUI elements and graf generated py file works
> > fine from
> > > console, but GRC only is unable to execute that already
> generated
> > file.
> >
> > Then post the flowgraph and the python code - it's the only
> way we can
> > help you.
> >
> > -- Cinaed
> >
> > >
> > > On Jul 6, 2017 11:08 PM, "Cinaed Simson"
> <address@hidden <mailto:address@hidden>
> > <mailto:address@hidden <mailto:address@hidden>>
> > > <mailto:address@hidden
> <mailto:address@hidden> <mailto:address@hidden
> <mailto:address@hidden>>>>
> > wrote:
> > >
> > > On 07/06/2017 12:10 AM, Jozef Lošonský wrote:
> > > > Hello,
> > > > my GRC is unable to execute graphs (no GUI elements)
> when I
> > switch
> > > > option to No GUI, everything else seems to be working.
> > >
> > > The option "No GUI" means no GUI elements, i.e., no graphs.
> > >
> > > If you had a graphical element in your flowgraph, GRC
> should have
> > > complained and printed an error message in the GRC console
> > when you
> > > clicked on the button "Generate the flow graph".
> > >
> > > In order to generate python code from GRC you have
> disable the GUI
> > > elements in the flowgraph in order to generate python code.
> > >
> > > > In addition "No
> > > > GUI" py script (generated by same GRC) is running fine in
> > console
> > > of the
> > > > same user which is running GRC what is interesting.
> > >
> > > I didn't find other
> > > > way how to try get more info about issue than run
> whole GRC
> > under
> > > strace
> > > > -ffy and read the strace file.
> > > > Comparing strace files with working GRC instance on
> another PC
> > > @jcorgan
> > > > did suggest that in execve python is missing.
> > >
> > > And most likely the gnuradio software and the required
> > software packages
> > > needed to run gnuradio on PC @jcorgan are probably
> missing too.
> > >
> > > A working installation of python is one of the
> perquisite to run
> > > gnuradio.
> > >
> > > >
> > > > Bad:
> > > > [pid 2704] execve("/usr/local/bin/", ["", "-e",
> > "/usr/bin/python",
> > > > "-u", "/home/pi/top_block.py"]...= -1 EACCES
> (Permission denied)
> > > > Good:
> > > > [pid 12112] execve("/usr/bin/python",
> ["/usr/bin/python", "-u",
> > > > "/home/loso/top_block.py"], [/* 75 vars */]
> <unfinished ...>
> > > >
> > > > I'm trying to find which env variable or what option am I
> > missing/have
> > > > wrongly configured in GRC config or somewhere else.
> > > Based on the content of this post, everything on your
> machine
> > is working
> > > correctly.
> > >
> > > If you can actually generate an error message using
> gnuradio -
> > other
> > > then enclosed operator errors - post the error message, the
> > flowgraph
> > > and the python code.
> > >
> > > >
> > > > Thank you.
> > > > Jozef
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Discuss-gnuradio mailing list
> > > > address@hidden
> <mailto:address@hidden> <mailto:address@hidden
> <mailto:address@hidden>>
> > <mailto:address@hidden
> <mailto:address@hidden> <mailto:address@hidden
> <mailto:address@hidden>>>
> > > >
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>>
> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>>>
> > > >
> > >
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> <mailto:address@hidden> <mailto:address@hidden
> <mailto:address@hidden>>
> > <mailto:address@hidden
> <mailto:address@hidden> <mailto:address@hidden
> <mailto:address@hidden>>>
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>>
> > > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
> > <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>>>
> > >
> >
>
- [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Cinaed Simson, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Cinaed Simson, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Cinaed Simson, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/06
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs,
Cinaed Simson <=
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/09
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Cinaed Simson, 2017/07/09
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/09
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Cinaed Simson, 2017/07/09
- Re: [Discuss-gnuradio] GRC [Errno 13] Permission denied for No GUI graphs, Jozef Lošonský, 2017/07/09