Re: [Discuss-gnuradio] Building gnuradio master fails

[address@hidden]

It seems opensuse runs an old rev of gsl. Here are the relevant file
names and revs:

gsl 1.16-74
gsl-devel 2.3-9.1
libgsl19 2.3-9.1
libgslblas0 2.3-9.1
python-pygsl 0.9.5-2.30
python-pygsl-devel 0.9.5-2.30

Using the science repo, I can upgrade gsl to rev 2.3. Yast will have to
deinstall a number of programs such as krita and more significant,
inkscape. I can build what breaks from source if the rev of gsl is the
problem.


On Sun, 21 May 2017 18:08:36 -0700
address@hidden wrote:

> 
> "Latest commit 0e32fca 4 days ago." That comes right off of github.
> https://github.com/gnuradio/gnuradio
> 
> When I'm on that machine, I will research what I have for the gnu
> scientific library. I have it, but don't know if it is up to date.
> 
> 
>   Original Message  
> From: Cinaed Simson
> Sent: Sunday, May 21, 2017 5:52 PM
> To: address@hidden
> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> 
> On 05/21/2017 01:27 AM, address@hidden wrote:
> > FWIW, I just compiled 0e32fca on opensuse. It builds just fine, but
> > I'm failing all the polar tests. Yeah I have scipy installed. I'll
> > start a new thread on that when I've totally given up debugging. But
> > the code on that rev is buildable on my PC.
> 
> I have no idea what 0e32fca is - looks like an arbitrary hex tag - but
> if the tests in gr-fec are failing it's most likely because
> development version of gsl wasn't installed - or it's the wrong
> version.
> 
> Can you simply install gsl and be on your merry way? Unlikely.
> 
> -- Cinaed
> 
> 
> > 
> > 
> > On Sun, 21 May 2017 08:13:28 +0200
> > "Ralph A. Schmid, dk5ras" <address@hidden> wrote:
> > 
> >> This is also my experience, I made exactly this, deleting the build
> >> dir, make a new one, fresh cmake, and so on.
> >>
> >> Ralph.
> >>
> >>
> >>> -----Original Message-----
> >>> From: address@hidden [mailto:address@hidden
> >>> Sent: Saturday, 20 May, 2017 20:50
> >>> To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis';
> >>> address@hidden Subject: Re: [Discuss-gnuradio] Building
> >>> gnuradio master fails
> >>>
> >>> Be that as it may, I have noticed that the first "cmake../", that
> >>> is a fresh directory, produces different output than a "make
> >>> clean" followed by "cmake ../". ‎ I've made it a point to do a
> >>> "rm -r build".
> >>>
> >>> By output, I means whatever is written to standard output. I don't
> >>> know if a fresh directly effects the actual build or not.
> >>>
> >>> Original Message
> >>> From: Ralph A. Schmid, dk5ras
> >>> Sent: Saturday, May 20, 2017 11:32 AM
> >>> To: 'Kostis Triantafyllakis'; address@hidden
> >>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> >>>
> >>> Hi,
> >>>
> >>> Forgot to mention that of course I already did so - with no
> >>> success...
> >>>
> >>> Ralph.
> >>> 
> >>>> -----Original Message-----
> >>>> From: Kostis Triantafyllakis [mailto:address@hidden
> >>>> Sent: Saturday, 20 May, 2017 18:19
> >>>> To: Ralph A. Schmid, dk5ras; address@hidden
> >>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
> >>>>
> >>>> Hello,
> >>>>
> >>>> Cleaning (or even deleting the whole build directory) before
> >>>> rebuilding, had helped me in similar cases.
> >>>> Maybe you could give it a try
> >>>>
> >>>> Best,
> >>>> Kostis
> >>>>
> >>>>
> >>>> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote: 
> >>>>> Hi,
> >>>>>
> >>>>> on a Kubuntu 16.04 system building gnuradio from source fails.
> >>>>> Branch is master, downloaded right now.
> >>>>>
> >>>>> UHD is also the latest version from right now.
> >>>>>
> >>>>> Any ideas what it could be? Here the output:
> >>>>>
> >>>>>
> >>>>> [ 99%] Built target _trellis_swig1
> >>>>> [ 99%] Building CXX object
> >>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
> >>>>>
> >>>>> [ 99%] Built target _trellis_swig0
> >>>>> [ 99%] Built target pygen_gr_uhd_swig_08777
> >>>>> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
> >>>>> [ 99%] Built target pygen_gr_vocoder_swig_43253
> >>>>> [ 99%] Built target _video_sdl_swig
> >>>>> [ 99%] Built target _vocoder_swig
> >>>>> [ 99%] Built target pygen_gr_fcd_swig_c4332
> >>>>> [ 99%] Built target _fcd_swig
> >>>>> [ 99%] Built target pygen_gr_wavelet_swig_89b19
> >>>>> [ 99%] Built target _wavelet_swig
> >>>>> [ 99%] Built target pygen_gr_wxgui_swig_78659
> >>>>> [100%] Built target _wxgui_swig
> >>>>> [100%] Built target pygen_gr_zeromq_swig_4d7be
> >>>>> [100%] Built target _zeromq_swig
> >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>> In 
> >>>> function 
> >>>>> ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
> >>>>> PyObject*, PyObject*)’:
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
> >>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named 
> >>> ‘set_gpio_debug’ 
> >>>>> (arg1)->set_gpio_debug(arg2,arg3);
> >>>>> ^
> >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>> In 
> >>>> function 
> >>>>> ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,
> >>> PyObject*, 
> >>>>> PyObject*)’:
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
> >>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named 
> >>> ‘set_gpio_debug’ 
> >>>>> (*arg1)->set_gpio_debug(arg2,arg3);
> >>>>> ^
> >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
> >>>>> In 
> >>>> function 
> >>>>> ‘void init_uhd_swig()’:
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
> >>>>> error: ‘ATR_REG_IDLE’ is not a member of
> >>>>> ‘uhd::usrp::dboard_iface’ ant(d,
> >>>>> "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int 
> >>>>>> (uhd::usrp:: 
> >>>>> ^
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
> >>>>> error: ‘ATR_REG_TX_ONLY’ is not a member of
> >>>>> ‘uhd::usrp::dboard_iface’ (d,
> >>>>> "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int 
> >>>>>> (uhd::usrp:: 
> >>>>> ^
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
> >>>>> error: ‘ATR_REG_RX_ONLY’ is not a member of
> >>>>> ‘uhd::usrp::dboard_iface’ (d,
> >>>>> "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int 
> >>>>>> (uhd::usrp:: 
> >>>>> ^
> >>>>> /home/ras/gnuradio/build/gr- 
> >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
> >>>>> error: ‘ATR_REG_FULL_DUPLEX’ is not a member of 
> >>> ‘uhd::usrp::dboard_iface’ 
> >>>>> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast<
> >>>>> int 
> >>>>>> (uhd::usrp:: 
> >>>>> ^
> >>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for
> >>>>> target
> >>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o'
> >>> failed 
> >>>>> make[2]: ***
> >>>>> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]
> >>> Error 
> >>>> 1 
> >>>>> CMakeFiles/Makefile2:15016: recipe for target
> >>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
> >>>>> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
> >>>>> Makefile:160: recipe for target 'all' failed
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>>
> >>>>> Ralph A. Schmid
> >>>>> Mondstr. 10
> >>>>> 90762 Fürth
> >>>>> +49-171-3631223
> >>>>> address@hidden
> >>>>> http://www.bclog.de/
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Discuss-gnuradio mailing list
> >>>>> address@hidden
> >>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>>>> 
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Discuss-gnuradio mailing list
> >>> address@hidden
> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio 
> >>
> > 
> > 
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio