|
From: | Ajinkya D Kadam |
Subject: | Re: [Discuss-gnuradio] Transmit and Receive hopping Sequence in FHSS (using gr-spread module) mismtach |
Date: | Fri, 26 Aug 2016 15:00:51 -0400 |
Ajinkya,How fast are you hopping? I've had loads of issues with hopping rapidly and not having the correct frequencies used.-DaveOn Tue, Aug 23, 2016 at 7:16 PM, Ajinkya D Kadam <address@hidden> wrote:______________________________HI All,I am using gr-spread module to transmit a signal using FHSS. When I receive the FHSS signal, the received signal has a completely different hopping sequence as from the transmitted one. I am using USRP N210 for transmission and reception. I am not sure why this is happening. The transmitted sequence is (frequencies in Khz)187.5-12.5162.5-62.562.5137.5-112.5-37.5112.5-162.5-137.5-87.512.537.587.5and the received sequence is37.562.5112.5-187.512.5187.5-37.587.5162.5-87.50137.5-137.5-112.5-62.537.562.5I have created a movie out of the images which plots the IQ, FFT and WaterFall plot for the transmitted signal and the received signal using the "plot_psd_base.py" file in gr-utils. Please have a look at both of them here and here.Please see the attached files for the flowgraphs, I am using as the transmitter and receiver.I have stored the received and transmitted signal to a file. Since these are large files I have uploaded them to google drive here.Could someone please help me understand the behavior I am observing ?Is this some sort of synchronization issue ? What am I missing ?Thanks in advance.ᐧ_________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |