[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] OOT block not showing in GRC
From: |
lwashbo |
Subject: |
Re: [Discuss-gnuradio] OOT block not showing in GRC |
Date: |
Sat, 08 Aug 2015 18:06:20 -0500 |
Ron,
Thanks for the info!
Logan
Sent from my Cyanogen phone
On Aug 8, 2015 5:59 PM, Ron Economos <address@hidden> wrote:
>
> Yes. I will cause your OOT blocks to be installed in the same place as all
> the other GNU Radio blocks.
>
> Ron
>
> On 08/08/2015 03:56 PM, Washbourne, Logan wrote:
>>
>> Kevin,
>>
>> It worked! I really appreciate your help!!
>>
>> Ron,
>>
>> So that install prefix should be pointing to where I installed gnuradio?
>>
>> (Never can know too many ways to skin a cat-metaphorically)
>>
>>
>>
>> Logan Washbourne
>> Electrical Engineering Graduate Student
>> (Electromagnetics)
>>
>>
>> On Sat, Aug 8, 2015 at 5:43 PM, Kevin McQuiggin <address@hidden> wrote:
>>>
>>> Hi Logan:
>>>
>>> I just went through the same process! My new OOT block wasn't being found.
>>> The solution is to add a [grc] segment to the config.conf file in
>>> ~/.gnuradio:
>>>
>>> I had to create the .gnuradio directory, then add the simple two-line [grc]
>>> stanza to a new config.conf file:
>>>
>>> [grc]
>>> local_blocks_path=/usr/local/share/gnuradio/grc/blocks
>>>
>>> This tells grc to look for additional blocks in the stated directory. So
>>> you would do something like:
>>>
>>> cd
>>> mkdir .gnuradio
>>> cd .gnuradio
>>> vi config.conf
>>>
>>> Then add the two lines above, your OOT block install path may be different
>>> so I'd check it first.
>>>
>>> Hope this helps,
>>>
>>> Kevin
>>>
>>> > On Aug 8, 2015, at 3:33 PM, Washbourne, Logan <address@hidden> wrote:
>>> >
>>> > Hello all,
>>> >
>>> > I am trying to create a simple OOT block. Eventually I would like to
>>> > create a block that lets a transmitting agent know if their message was
>>> > received or not, but for now I am just trying to create a block that
>>> > multiplies the input values by 2 (very similar to the guided tutorial
>>> > example of the square_ff block).
>>> >
>>> > So the problem is that when I follow all of the instructions no errors
>>> > appear but when I open up the GRC, my module and blocks are not there.
>>> >
>>> > So hopefully no one minds if I explain how I have installed Gnuradio on
>>> > my machine and the process of creating the OOT module, in hopes someone
>>> > might find where I made an error.
>>> >
>>> > I have already gotten previous help and responses on here that really did
>>> > help me out so I'd like to say again, thank you to the community.
>>> >
>>> > Ok, so I used Pybombs to install Gnuradio.
>>> >
>>> > /home/username/Thesis/pybombs is where I installed pybombs.
>>> >
>>> > Before installing gnuradio I changed the permissions to the path of
>>> > /opt/gnuradio/pybombs by using: sudo chown username:mygroupname
>>> > /opt/gnuradio/pybombs (thanks to Nathan West)
>>> >
>>> > I then used ./pybombs install gnuradio.
>>> >
>>> > I changed the install prefix to /opt/gnuradio/pybombs
>>> >
>>> > Then I used ./pybobms env
>>> > source /opt/gnuradio/pybombs/setup_env.sh (sometimes I have to rerun this
>>> > to get the GRC to open, not sure what I'm doing to undo this command)
>>> >
>>> > Then I created the folder, /home/username/Thesis/OOT
>>> >
>>> > I then used gr_modtool newmod ACK
>>> >
>>> > Then /home/username/Thesis/OOT/gr-ACK gr_modtool add -t general check
>>> >
>>> > altered the QA file
>>> > rewrote the check_impl.cc file
>>> >
>>> > Created the build folder(/home/username/Thesis/OOT/gr-ACK/build
>>> >
>>> > ran cmake ../
>>> > ran make
>>> > ran make test
>>> >
>>> > Everything passed(after some debugging, array indices start at 0 btw)
>>> >
>>> > I then ran gr_modtool makexml check in the gr-ACK folder
>>> >
>>> > Then cd build
>>> >
>>> > sudo make install
>>> > sudo ldconfig
>>> >
>>> > gnuradio-companion
>>> >
>>> > And I can't find my module or block.
>>> >
>>> > I have a feeling that I'm still installing gnuradio or my OOT blocks in
>>> > the wrong places, but I'm not sure how to remedy it.
>>> >
>>> > *********check_impl.cc***********
>>> >
>>> > #ifdef HAVE_CONFIG_H
>>> > #include "config.h"
>>> > #endif
>>> >
>>> > #include <gnuradio/io_signature.h>
>>> > #include "check_impl.h"
>>> >
>>> > namespace gr {
>>> > namespace ACK {
>>> >
>>> > check::sptr
>>> > check::make()
>>> > {
>>> > return gnuradio::get_initial_sptr
>>> > (new check_impl());
>>> > }
>>> >
>>> > /*
>>> > * The private constructor
>>> > */
>>> > check_impl::check_impl()
>>> > : gr::block("check",
>>> > gr::io_signature::make(1,1, sizeof (float)),
>>> > gr::io_signature::make(1,1, sizeof (float)))
>>> > {}
>>> >
>>> > /*
>>> > * Our virtual destructor.
>>> > */
>>> > check_impl::~check_impl()
>>> > {
>>> > }
>>> >
>>> > void
>>> > check_impl::forecast (int noutput_items, gr_vector_int
>>> >&ninput_items_required)
>>> > {
>>> > ninput_items_required[0] = noutput_items;
>>> > }
>>> >
>>> > int
>>> > check_impl::general_work (int noutput_items,
>>> > gr_vector_int &ninput_items,
>>> > gr_vector_const_void_star &input_items,
>>> > gr_vector_void_star &output_items)
>>> > {
>>> > const float *in = (const float *) input_items[0];
>>> > float *out = (float *) output_items[0];
>>> >
>>> > // Do <+signal processing+>
>>> > // Tell runtime system how many input items we consumed on
>>> > // each input stream.
>>> >
>>> > for(int i = 0; i < noutput_items ;i++)
>>> > {
>>> > out[i] = in[i] * 2;
>>> > }
>>> >
>>> >
>>> > consume_each (noutput_items);
>>> >
>>> > // Tell runtime system how many output items we produced.
>>> > return noutput_items;
>>> > }
>>> >
>>> > } /* namespace ACK */
>>> > } /* namespace gr */
>>> >
>>> >
>>> > ***********qa_check.py**********************
>>> >
>>> > #!/usr/bin/env python
>>> >
>>> >
>>> > from gnuradio import gr, gr_unittest
>>> > from gnuradio import blocks
>>> > import ACK_swig as ACK
>>> >
>>> > class qa_check (gr_unittest.TestCase):
>>> >
>>> > def setUp (self):
>>> > self.tb = gr.top_block ()
>>> >
>>> > def tearDown (self):
>>> > self.tb = None
>>> >
>>> > def test_001_check (self):
>>> >
>>> > src_data = (3, 4, 5.5, 2, 3)
>>> > expected_result = (6, 8, 11, 4, 6)
>>> > src = blocks.vector_source_f(src_data)
>>> > sqr = ACK.check()
>>> > dst = blocks.vector_sink_f()
>>> > self.tb.connect(src,sqr)
>>> > self.tb.connect(sqr,dst)
>>> > self.tb.run()
>>> > result_data = dst.data()
>>> > self.assertFloatTuplesAlmostEqual(expected_result,result_data,6)
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > if __name__ == '__main__':
>>> > gr_unittest.run(qa_check, "qa_check.xml")
>>> >
>>> >
>>> >
>>> >
>>> > I really appreciate all of your time,
>>> >
>>> > Logan Washbourne
>>> > Electrical Engineering Graduate Student
>>> > (Electromagnetics)
>>> >
>>> > _______________________________________________
>>> > Discuss-gnuradio mailing list
>>> > address@hidden
>>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
>>
>>
>