[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] uhd blocks missing
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] uhd blocks missing |
Date: |
Fri, 01 Aug 2014 20:39:45 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.24) Gecko/20111108 Fedora/3.1.16-1.fc14 Thunderbird/3.1.16 |
On 08/01/2014 08:04 PM, Richard Bell wrote:
Hello,
I am using ubuntu 13.10 and I installed gnuradio using the 'apt-get
install gnuradio' command as described here
http://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGR
I did not experience any errors or issues with the above install. Now
it's not clear to me how I should proceed to get the gr-uhd blocks to
appear in gnuradio-companion so I can use my USRP N210. I've installed
the uhd software as described here
http://code.ettus.com/redmine/ettus/projects/uhd/wiki/UHD_Linux
after installing gnuradio (order of operations issue?) but I still
don't have access to usrp_sink or usrp_source from gnuradio-companion.
What steps should I take?
Thanks,
Rich
The version of Gnu Radio you'll have from the official repos is going to
be horribly out of date, which is part of the reason that Ettus offers
a combined installation package for GR+UHD:
http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki/GNURadio_Linux
So, I would do a:
sudo apt-get purge gnuradio gnuradio* uhd uhd*
And then follow the instructions given above from the Ettus site, OR:
Or use PyBombs or build-gnuradio to install from source:
http://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGRFromSource
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org