|
From: | Pengyu Zhang |
Subject: | Re: [Discuss-gnuradio] phase noise of RFX900 daughter board |
Date: | Tue, 11 Feb 2014 09:26:36 -0500 |
I think you may be measuring some other artifacts and not actual phase noise. Can you send me the program you used to measure this? In any case, the WBX and SBX daughterboards have much lower phase noise than RFX900, and the newer motherboard also will have lower phase noise.MattOn Mon, Feb 10, 2014 at 2:18 PM, Pengyu Zhang <address@hidden> wrote:
_______________________________________________Hi,We have tried to measure the phase noise of RFX900 daughter board when the daughter board is mounted on a USRP 1 mother board. When we directly connect the TX/RX port to the RX2 port through a 46dB attenuation signal, we still observe significant amount of phase noise as shown in the attached figures. Those figures suggest that the phase noise is about 8 degrees which cannot be tolerated by many communication systems. Would be great if you guys can provide some suggestions on reducing the phase of the USRP platform.
Pengyu
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |