Re: [Discuss-gnuradio] UHD compiling under Windows, invalid vector<T> error

[Josh Blum]

On 11/19/2012 08:49 AM, Seth Hollar wrote:
> Hi,
> This is mostly a UHD questions.
> 

http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

:-)

> I have taken the source code of UHD and compiled with the CMAKE option
> under Windows 7 using Visual Studio 2010 with Boost 1.51.
> 
> Some of the examples (rx_timed_samples and tx_timed_samples) do not work
> right giving an "/invalid vector<T> subscript/" error when run.
> 
> However, when I add the compile option /Zi (Debug Program information,
> Program Database (/Zi)), then they seem to work.

Sounds like an ABI mismatch. Perhaps you also build the UHD library in
Debug mode. Make sure that the client app and the library build type match.

-josh

> 
> Thanks,
> Seth
> 
> 
> *example without /Zi**
> *
> C:\uhd\host\build\examples\Release>tx_timed_samples
> 
> Win32; Microsoft Visual C++ version 10.0; Boost_105100;
> UHD_003.004.004-255-g4c2
> 254b9
> 
> 
> Creating the usrp device with: ...
> -- Opening a USRP2/N-Series device...
> -- Current recv frame size: 1472 bytes
> -- Current send frame size: 1472 bytes
> -- Creating WSA UDP transport for 192.168.10.2:49156
> -- Creating WSA UDP transport for 192.168.10.2:49158
> -- Creating WSA UDP transport for 192.168.10.2:49157
> -- Creating WSA UDP transport for 192.168.10.2:49159
> Error: invalid vector<T> subscript
> 
> 
> *example with /Zi**
> *
> C:\uhd\host\build\examples\Release>tx_timed_samples.exe
> Win32; Microsoft Visual C++ version 10.0; Boost_105100;
> UHD_003.004.004-255-g4c2
> 254b9
> 
> 
> Creating the usrp device with: ...
> -- Opening a USRP2/N-Series device...
> -- Current recv frame size: 1472 bytes
> -- Current send frame size: 1472 bytes
> -- Creating WSA UDP transport for 192.168.10.2:49156
> -- Creating WSA UDP transport for 192.168.10.2:49158
> -- Creating WSA UDP transport for 192.168.10.2:49157
> -- Creating WSA UDP transport for 192.168.10.2:49159
> Using Device: Single USRP:
>   Device: USRP2 / N-Series Device
>   Mboard 0: N210r4
>   RX Channel: 0
>     RX DSP: 0
>     RX Dboard: A
>     RX Subdev: SBXv3 RX
>   TX Channel: 0
>     TX DSP: 0
>     TX Dboard: A
>     TX Subdev: SBXv3 TX
> 
> Setting TX Rate: 6.250000 Msps...
> Actual TX Rate: 6.250000 Msps...
> 
> Setting device timestamp to 0...
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 363 samples
> Sent packet: 199 samples
> 
> Waiting for async burst ACK... success
> 
> Done!
>