Hi, all,
We have made a FPGA FFT module.
We downloaded the UHD source code from
We modified the usrp_std.v under
fpga/usrp1/toplevel/usrp_std/
to link our FFT module between rx_buffer and USB.
We have successfully compiled the usrp_std.qpf in Quartus II 9.1.
How can we make it effective in our USRP E100?
We found the way to update FPGA firmware in usrpe1xx-FAQ
But what we want to update is the FPGA code.
Thanks a lot!
Yooxi