[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DB
From: |
Paul Lambert |
Subject: |
Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS |
Date: |
Tue, 7 Jun 2011 14:35:41 +0200 |
On Tue, Jun 7, 2011 at 2:02 PM, Marcus D. Leech <address@hidden> wrote:
> This isn't really the correct mailing list for OpenBTS questions, but I
> have a couple of suggestions:
I wasn't sure it's a an openBTS question... as I said I don't know
where I should look first since I tried so much.
>
> o what happens if you undo the clock modifications?
> o what do you get if you use something like:
>
> uhd_fft.py --s 1.0e6 --freq 950e6
>
> Do you get an error, or do you get some kind of reasonable-looking
> spectral display?
I cannot find any uhd_fft.py, I have:
usrp_fft.py
but it isn't aware of any flag that could be similar to --s...
Where can I find that tool?
Thanks for the reply
- [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS, Paul Lambert, 2011/06/07
- Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS, Marcus D. Leech, 2011/06/07
- Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS,
Paul Lambert <=
- Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS, Thomas Tsou, 2011/06/07
- Prev by Date:
Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS
- Next by Date:
[Discuss-gnuradio] how to use gr_clock_recovery_mm_cc
- Previous by thread:
Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS
- Next by thread:
Re: [Discuss-gnuradio] GSM not detecting station, USRP1, FA-SY1, WBX, DBS
- Index(es):