Re: [Discuss-gnuradio] Compile Gnuradio 3.3.0

[Howard Wong]

I get the following warning when running make, does it matter?
Thanks.


/usr/src/gnuradio-3.3.0/usrp/host/include/usrp/usrp_basic.h:91: warning: 
explicit link request to 'make' could not be resolved
/usr/src/gnuradio-3.3.0/usrp/host/include/usrp/usrp_basic.h:91: warning: 
explicit link request to 'make' could not be resolved
/usr/src/gnuradio-3.3.0/usrp/host/include/usrp/usrp_basic.h:91: warning: 
explicit link request to 'make' could not be resolved
sh: latex: not found
Problems running latex. Check your installation or look for typos in 
_formulas.tex and check _formulas.log!
dvips: DVI file can't be opened: _formulas.dvi: No such file or directory
Problems running dvips. Check your installation!
/usr/src/gnuradio-3.3.0/usrp/host/include/usrp/usrp_basic.h:91: warning: 
explicit link request to 'make' could not be resolved
make[4]: Leaving directory `/usr/src/gnuradio-3.3.0/docs/doxygen'
make[3]: Leaving directory `/usr/src/gnuradio-3.3.0/docs/doxygen'
make[3]: Entering directory `/usr/src/gnuradio-3.3.0/docs'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/usr/src/gnuradio-3.3.0/docs'
make[2]: Leaving directory `/usr/src/gnuradio-3.3.0/docs'
make[2]: Entering directory `/usr/src/gnuradio-3.3.0'
make[2]: Leaving directory `/usr/src/gnuradio-3.3.0'
make[1]: Leaving directory `/usr/src/gnuradio-3.3.0'
address@hidden:/usr/src/gnuradio-3.3.0$





On 11/01/2011 03:43, Ben Ahrens wrote:
> I assume you're looking here:
> http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall.  If so, you
> just need to run this:
>
> sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev
> swig g++ automake libtool python-dev libfftw3-dev \
> libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
> libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
> libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
> python-cheetah python-lxml doxygen qt4-dev-tools \
> libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools
>
> If you look carefully boost is in there.  If you use the above script
> there shouldn't be any other dependencies you need to install.
>
> You shouldn't need to use those instructions to install libboost after that.
>
> Ben
>
> On Mon, Jan 10, 2011 at 12:50 PM, Howard Wong<address@hidden>  wrote:
> > Can anyone advice on the following:
> >
> > I am compiling gnuradio 3.3.0 on Ubuntu 10.10
> > and following instruction on UbuntuInstall of gunradio.org
> >
> > And I've installed the Boost by apt-get, is it necessary to install Boost
> > manually?
> >   - For Ubuntu 8.04 and older, download and install Boost 1.35 or later as
> > follows
> >
> >
> >
> > Then, the instruction than teaches me to set the LD_LIBRARY_PATH,
> > however, the ENV_VAR $BOOST_PREFIX is not set.
> >
> > export LD_LIBRARY_PATH=$BOOST_PREFIX/lib
> >
> >
> > Where should I post $BOOST_PREFIX to?
> > to /usr/lib as the .a lib files are there
> > or to /usr/include/boost where the hpp files are there
> >
> > Moreover,  it sets the $BOOST_PREFIX/lib  and I can't find lib under the
> > boost directories.
> >
> >
> > And here are the result of config.log grep boost:
> >
> > configure:20389: checking for boost>= 1.35
> > configure:20955: checking whether the boost::thread includes are available
> >
> >
> > Thanks for kindly help.
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio