[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] DBSRx capturing image spectrum
From: |
Nick Foster |
Subject: |
Re: [Discuss-gnuradio] DBSRx capturing image spectrum |
Date: |
Fri, 12 Nov 2010 10:45:20 -0800 |
On Fri, 2010-11-12 at 19:56 +0200, john kimionis wrote:
> Hi,
> I am trying to capture a RFID Reader-Tag Conversation at 866.3MHz. I'm
> testing 2 cards: A FLEX 900 and a DBSRx rev2.2. With the FLEX900 i'm
> able to clearly see the Reader signals and the tag replies, but with
> the DBSRx the signals showed distorted by some higher frequency
> signals.
>
> Using usrp_fft.py with the same settings and USRP/Antennas at the same
> exact position what I surprisingly saw was that the DBSRx is capturing
> an image of the RFID spectrum 400 kHz away!
>
> What could this mean? Is something on the front-end damaged?
>
>
It's possible. If you're using a USRP1, try swapping daughterboard sides
to make sure the problem follows the daughterboard. It looks as though
either the I or Q channels are not operating.
--n
> Here are the two screenshots of usrp_fft.py. one for FLEX 900 (good
> one) and one for the DBSRx (problematic)
> http://twitshoot.com/1f
> http://twitshoot.com/1g
>
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio