[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Valve Problem
From: |
Umair Naeem |
Subject: |
[Discuss-gnuradio] Valve Problem |
Date: |
Thu, 6 May 2010 08:50:42 +0000 |
I am trying to control my flow graph using a valve block. I have "Probe Avg
Mag^2" and "Number Sink" blocks after the "valve". I want to control this valve
with a "Variable Chooser" block. I put the ID od variable chooser block in the
"open" field of the valve so that if the variable chooser value is changed to
True it will change the value of "open" in valve but when do this the flow
graph seems to stop working (stucked) and nothing happens looks like there is a
lot of processing going on in behind. If I put the same value in the valve
directly that ocurs in variable chhoser before i run the flow graph, the valve
seems to work by opening the connection and Number Sink shows no value but when
i control the value of the valve during the program execution the program seems
to stop. Do i need to throttle or something else? The same problem occurs
whether I use FFT sink or Number Sink or any other.
Regards,
Umair Naeem
MSc Communication Engineering
Chalmers University ot Technology, Sweden.
- [Discuss-gnuradio] Valve Problem,
Umair Naeem <=