[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] "Failed to set frequency to ..." message in Spect
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] "Failed to set frequency to ..." message in Spectrum scan |
Date: |
Sat, 01 May 2010 18:52:26 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100330 Fedora/3.0.4-1.fc12 Thunderbird/3.0.4 |
On 05/01/2010 04:40 PM, Rahman Doost wrote:
> I checked and they're not hundreds. In fact there does not seem to be
> anything unusual about that.
> Plus I see some 'S' sequences every 3 or 4 failed scans too. In USRP2
> usage FAQ, it says this happens when packets are dropped. But I don't
> know which one causes the other one.
>
> Rahman
>
>
The next thing to check for is a gross memory leak. There is clearly
*some* resource that is leaking,
probably on the host side. Because when you re-start the application,
everything is just fine for a while
after that, correct?
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org