[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: change variables in the FFT Plot the 2.
From: |
feldmaus |
Subject: |
[Discuss-gnuradio] Re: change variables in the FFT Plot the 2. |
Date: |
Thu, 26 Feb 2009 10:04:08 +0000 (UTC) |
User-agent: |
Loom/3.14 (http://gmane.org/) |
Josh Blum <josh <at> joshknows.com> writes:
>
>
> Using GRC, I just tested changing the sample rate of the fftsink. I
> tested this for the gl and non gl version. The x-axis markers move and
> change correctly when I move the slider for sample rate. The
> flowgraph.grc is attached.
>
> I do not understand why you have the problem? Do you have the latest
> gnuradio trunk installed? http://gnuradio.org/svn/gnuradio/trunk
I have the SVN Version 2009-Jan-28.
Further on everytimen i open my *.grc file, the <grc> deletes the manually
inserted class-method,
<set_sample_rate>
so there must be a Problem.
>
> Also, I am concerned that the gl fftsink aborted/segfaulted. Can you run
> the flow graph in gdb and send the traceback?
>
Yes i will try this and post the message here.
Another important Point,
Is there a possibility to save my manually inserted python commands
in the <top_block.py> file without loosing this by the next
start of <grc> ?
Regards Markus
- [Discuss-gnuradio] change variables in the FFT Plot the 2., feldmaus, 2009/02/24
- [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., feldmaus, 2009/02/24
- [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., feldmaus, 2009/02/24
- [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., feldmaus, 2009/02/25
- Re: [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., Josh Blum, 2009/02/25
- [Discuss-gnuradio] Re: change variables in the FFT Plot the 2.,
feldmaus <=
- Re: [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., Josh Blum, 2009/02/26
- Re: [Discuss-gnuradio] Re: change variables in the FFT Plot the 2., Josh Blum, 2009/02/26