[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GRC and OS X 10.5.6
From: |
emil.molin |
Subject: |
Re: [Discuss-gnuradio] GRC and OS X 10.5.6 |
Date: |
Wed, 4 Feb 2009 03:42:26 -0800 (PST) |
I had the same problem and i added the paths for the installed modules to the
PythonPath (i used "export
PYTHONPATH:/opt/local/var/macports/software/[modulename]/" i however wont
pass the check for GRC it still refuses.
I also have gsl installed, i whould appreciate any help
Einar Thorsrud wrote:
>
> I removed everything and started over again with the mentioned guide (
> https://radioware.nd.edu/documentation/install-guides/mac-os-x
> ), and installed the modules Michael recommended (py25-cheetah,
> py25-gtk and py25-lxml). In addition I installed gsl, which was needed.
>
> Now most components configure correctly, so this seemed to be the way
> to go. The USRP2-modules was not configured, but I will probably only
> be using the original USRP anyway.
>
> There was problem with the path as suggested by Josh, but setting the
> path in .profile fixed the problem (somehow it seems that .bachrc
> wasn't executed when opening a terminal).
>
> Thank you for your help guys, and have a merry Christmas (in a few
> days).
>
> --
> Einar Thorsrud
>
> Singsakerbakken 2B-26
> N-7030 Trondheim
> +47 958 77 206
> address@hidden
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
View this message in context:
http://www.nabble.com/GRC-and-OS-X-10.5.6-tp21109605p21828880.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- Re: [Discuss-gnuradio] GRC and OS X 10.5.6,
emil.molin <=