[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] gmsk error
From: |
address@hidden |
Subject: |
Re: [Discuss-gnuradio] gmsk error |
Date: |
Tue, 6 Dec 2005 15:57:26 -0500 |
What are the parameters/arguments (omega, gain_omega, me, gain_mu...) used
in gr_clock_recovery_mm_xx and how do you determine what they should be?
I have been trying to find in the Python literature what the follow syntac
represent.
"""
...
@param omega: nominal relative freq (defaults to spb)
@type omega: float
@param gain_mu: controls rate of mu adjustment
@type gain_mu: float
@param mu: fractional delay [0.0, 1.0]
@type mu: float
@param omega_relative_limit: sets max variation in omega
@type omega_relative_limit: float, typically 0.000200 (200 ppm)
@param freq_error: bit rate error as a fraction
@param float
"""
Is this some type of preprocessro directive?
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
- RE: [Discuss-gnuradio] gmsk error, address@hidden, 2005/12/01
- RE: [Discuss-gnuradio] gmsk error, Robitaille, Michael, 2005/12/02
- Re: [Discuss-gnuradio] gmsk error, address@hidden, 2005/12/05
- Re: [Discuss-gnuradio] gmsk error, address@hidden, 2005/12/05
- Re: [Discuss-gnuradio] gmsk error,
address@hidden <=
- Re: [Discuss-gnuradio] gmsk error, address@hidden, 2005/12/06
- Re: [Discuss-gnuradio] gmsk error, address@hidden, 2005/12/06