[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DejaGnu] add dejagnu mips-sim-idt32 baseboard.

From: cgd
Subject: [DejaGnu] add dejagnu mips-sim-idt32 baseboard.
Date: 15 Mar 2002 10:29:15 -0800

FYI, just checked this into the 'src' repository.
their maintainers file says to notify y'all about changes made there.

Also FYI, there was a change a few months ago (from Eric Christopher) to
add a mips-sim-idt64 baseboard, as well.  I dunno if you were notified
about it, but it doesn't appear in your current cvsweb so i thought
i'd mention it.


------- Start of forwarded message -------
From: address@hidden
Newsgroups: mlist.gnu.gdb.patches
Subject: [PATCH RFA] add dejagnu mips-sim-idt32 baseboard.
Date: Mon, 11 Mar 2002 22:04:26 +0000 (UTC)
Organization: none given
Message-ID: <address@hidden>
References: <address@hidden>
Mime-Version: 1.0
Content-Type: text/plain; 
Content-Transfer-Encoding: 7bit
To: address@hidden

[ MAINTAINERS says to post dejagnu patches here... but doesn't say who
  approves them!  8-]

The following patch adds a mips-sim-idt32 baseboard, which is almost
identical to the existing mips-sim-idt64 baseboard.

The mips-sim-idt64 baseboard is used for mips64 testing, and sets the
ISA markings on the resulting binary to indicate mips64.

This new baseboard is for mips32 testing, and sets the ISA markings to
indicate mips32.

(If you're using a simulator that supports multiple ISAs, e.g. mips32
and mips64, and determines which to support via the binary ISA
markings, then using mips64 isn't The Right Thing: you don't catch
accidental use of mips64 instructions in the code being run.
Therefore, just using e.g. the -idt64 config isn't the right thing for

Once this is approved, i'll "Notify of
generic changes." as suggested in the top-level MAINTAINERS file.

[ dejagnu/ChangeLog]
2002-03-11  Chris Demetriou  <address@hidden>
        * baseboards/mips-sim-idt32.exp: New file.

Index: baseboards/mips-sim-idt32.exp
RCS file: mips-sim-idt32.exp
diff -N mips-sim-idt32.exp
--- /dev/null   Tue May  5 13:32:27 1998
+++ mips-sim-idt32.exp  Mon Mar 11 13:48:44 2002
@@ -0,0 +1,36 @@
+# Load the generic configuration for this board. This will define a basic
+# set of routines needed by the tool to communicate with the board.
+load_generic_config "sim";
+# basic-sim.exp is a basic description for the standard Cygnus simulator.
+load_base_board_description "basic-sim";
+# This tells it which directory to look in for the simulator.
+setup_sim mips;
+# No multilib flags are set by default.
+process_multilib_options "";
+# The compiler used to build for this board. This has *nothing* to do
+# with what compiler is tested if we're testing gcc.
+set_board_info compiler "[find_gcc]";
+#set_board_info needs_status_wrapper 1
+set_board_info cflags "[libgloss_include_flags] [newlib_include_flags]";
+set_board_info ldflags "[libgloss_link_flags] [newlib_link_flags]";
+# Use idt.
+if { [board_info $board obj_format] == "ecoff" } {
+    set_board_info ldscript "-Wl,-Tidtecoff.ld";
+} else {
+    set_board_info ldscript "-Wl,-Tidt32.ld";
+# And, it can't do arguments, and doesn't have real signals.
+set_board_info noargs 1;
+set_board_info gdb,nosignals 1;
+# Tell gdb to assume no fpu for -msoft-float compilation
+if {[string match "*soft-float*" $current_target_name]} {
+  set_board_info gdb_init_command "set mipsfpu none"

------- End of forwarded message -------

reply via email to

[Prev in Thread] Current Thread [Next in Thread]