========================================================= GNU coreutils 9.1.198-e68b1: ./tests/test-suite.log ========================================================= # TOTAL: 641 # PASS: 485 # SKIP: 151 # XFAIL: 0 # FAIL: 5 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 SKIP: tests/tail-2/inotify-race =============================== inotify-race.sh: skipped test: inotify is not supported SKIP tests/tail-2/inotify-race.sh (exit status: 77) SKIP: tests/tail-2/inotify-race2 ================================ inotify-race2.sh: skipped test: inotify is not supported SKIP tests/tail-2/inotify-race2.sh (exit status: 77) SKIP: tests/rm/ext3-perf ======================== ext3-perf.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/rm/ext3-perf.sh (exit status: 77) SKIP: tests/cp/link-heap ======================== link-heap.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/cp/link-heap.sh (exit status: 77) SKIP: tests/cp/no-ctx ===================== ld: cannot find -ldl grep: /proc/filesystems: No such file or directory no-ctx.sh: skipped test: this system lacks SELinux support SKIP tests/cp/no-ctx.sh (exit status: 77) SKIP: tests/misc/tty-eof ======================== tty-eof.pl: this script requires Perl's Expect package >=1.11 SKIP tests/misc/tty-eof.pl (exit status: 77) SKIP: tests/tail-2/inotify-rotate ================================= inotify-rotate.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail-2/inotify-rotate.sh (exit status: 77) SKIP: tests/tail-2/inotify-rotate-resources =========================================== inotify-rotate-resources.sh: skipped test: inotify required SKIP tests/tail-2/inotify-rotate-resources.sh (exit status: 77) SKIP: tests/tail-2/inotify-dir-recreate ======================================= inotify-dir-recreate.sh: skipped test: inotify is not supported SKIP tests/tail-2/inotify-dir-recreate.sh (exit status: 77) SKIP: tests/tail-2/inotify-only-regular ======================================= inotify-only-regular.sh: skipped test: inotify support required SKIP tests/tail-2/inotify-only-regular.sh (exit status: 77) SKIP: tests/rm/fail-eperm ========================= fail-eperm.xpl: couldn't find a file not owned by you in any of the following directories: /tmp /var/tmp /usr/tmp ...so, skipping this test SKIP tests/rm/fail-eperm.xpl (exit status: 77) SKIP: tests/rm/hash =================== hash.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/hash.sh (exit status: 77) SKIP: tests/rm/r-root ===================== ld: cannot find -ldl diff -u /dev/null err --- /dev/null 1970-01-01 +++ err 1970-01-01 +bp.py:1: Error in sourced command file: +Undefined command: "breakpoint_handler". Try "help". +Cannot open "" bp.py:1: Error in sourced command file: Undefined command: "breakpoint_handler". Try "help". Cannot open "" r-root.sh: skipped test: internal test failure: maybe LD_PRELOAD or gdb doesn't work? SKIP tests/rm/r-root.sh (exit status: 77) SKIP: tests/rm/many-dir-entries-vs-OOM ====================================== many-dir-entries-vs-OOM.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/many-dir-entries-vs-OOM.sh (exit status: 77) SKIP: tests/rm/rm-readdir-fail ============================== ld: cannot find -ldl Cannot open "" rm-readdir-fail.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/rm/rm-readdir-fail.sh (exit status: 77) SKIP: tests/misc/seq-long-double ================================ long.c:1:10: fatal error: features.h: No such file or directory #include ^~~~~~~~~~~~ compilation terminated. seq-long-double.sh: skipped test: this test runs only on systems with glibc and long double != double SKIP tests/misc/seq-long-double.sh (exit status: 77) SKIP: tests/tail-2/tail-n0f =========================== tail-n0f.sh: skipped test: /proc/4387/status: missing or 'different' SKIP tests/tail-2/tail-n0f.sh (exit status: 77) SKIP: tests/misc/arch ===================== arch: not built arch.sh: skipped test: required program(s) not built SKIP tests/misc/arch.sh (exit status: 77) SKIP: tests/misc/pwd-option =========================== pwd-option.sh: skipped test: cd does not properly update $PWD SKIP tests/misc/pwd-option.sh (exit status: 77) SKIP: tests/misc/coreutils ========================== coreutils: not built coreutils.sh: skipped test: required program(s) not built SKIP tests/misc/coreutils.sh (exit status: 77) SKIP: tests/misc/cut-huge-range =============================== cut-huge-range.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/cut-huge-range.sh (exit status: 77) SKIP: tests/misc/csplit-heap ============================ csplit-heap.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/csplit-heap.sh (exit status: 77) SKIP: tests/misc/csplit-io-err ============================== ld: cannot find -ldl csplit-io-err.sh: skipped test: LD_PRELOAD interception failed SKIP tests/misc/csplit-io-err.sh (exit status: 77) FAIL: tests/misc/date-debug =========================== --- exp2 2023-03-14 23:16:14.875425798 +0100 +++ out2 2023-03-14 23:16:14.879565133 +0100 @@ -5,9 +5,8 @@ date: error: invalid date/time value: date: user provided time: '(Y-M-D) 2006-04-02 02:30:00' date: normalized time: '(Y-M-D) 2006-04-02 XX:XX:XX' -date: -- +date: date: possible reasons: -date: non-existing due to daylight-saving time; date: numeric values overflow; date: missing timezone date: invalid date 'TZ="America/Edmonton" 2006-04-02 02:30:00' FAIL tests/misc/date-debug.sh (exit status: 1) FAIL: tests/misc/date-tz ======================== date: invalid date 'TZ="aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa0" 2017' FAIL tests/misc/date-tz.sh (exit status: 1) FAIL: tests/misc/expr-multibyte =============================== expr-multibyte.pl: test mb-l5: stdout mismatch, comparing mb-l5.1 (expected) and mb-l5.O (actual) *** mb-l5.1 Tue Mar 14 23:16:18 2023 --- mb-l5.O Tue Mar 14 23:16:18 2023 *************** *** 1 **** - 4 --- 0 ---- expr-multibyte.pl: test mb-l6: stdout mismatch, comparing mb-l6.1 (expected) and mb-l6.O (actual) *** mb-l6.1 Tue Mar 14 23:16:18 2023 --- mb-l6.O Tue Mar 14 23:16:18 2023 *************** *** 1 **** - 4 --- 0 ---- expr-multibyte.pl: test mb-i5: stdout mismatch, comparing mb-i5.1 (expected) and mb-i5.O (actual) *** mb-i5.1 Tue Mar 14 23:16:18 2023 --- mb-i5.O Tue Mar 14 23:16:18 2023 *************** *** 1 **** ! 4 --- 1 ---- ! 8 expr-multibyte.pl: test mb-i6 failed: exit status mismatch: expected 1, got 0 expr-multibyte.pl: test mb-i7: stdout mismatch, comparing mb-i7.1 (expected) and mb-i7.O (actual) *** mb-i7.1 Tue Mar 14 23:16:18 2023 --- mb-i7.O Tue Mar 14 23:16:18 2023 *************** *** 1 **** - 4 --- 0 ---- expr-multibyte.pl: test mb-s8: stdout mismatch, comparing mb-s8.1 (expected) and mb-s8.O (actual) *** mb-s8.1 Tue Mar 14 23:16:18 2023 --- mb-s8.O Tue Mar 14 23:16:18 2023 *************** *** 1 **** - c´e --- 0 ---- FAIL tests/misc/expr-multibyte.pl (exit status: 1) SKIP: tests/misc/head-c ======================= head-c.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/head-c.sh (exit status: 77) SKIP: tests/misc/printf-surprise ================================ printf-surprise.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/printf-surprise.sh (exit status: 77) SKIP: tests/misc/runcon-compute =============================== runcon: runcon may be used only on a SELinux kernel runcon-compute.sh: skipped test: runcon setup failed SKIP tests/misc/runcon-compute.sh (exit status: 77) SKIP: tests/misc/shuf-reservoir =============================== shuf-reservoir.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/shuf-reservoir.sh (exit status: 77) SKIP: tests/misc/sort-benchmark-random ====================================== sort-benchmark-random.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-benchmark-random.sh (exit status: 77) SKIP: tests/misc/sort-compress-hang =================================== sort-compress-hang.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-compress-hang.sh (exit status: 77) SKIP: tests/misc/sort-compress-proc =================================== sort-compress-proc.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/sort-compress-proc.sh (exit status: 77) SKIP: tests/misc/sort-h-thousands-sep ===================================== sort-h-thousands-sep.sh: skipped test: The Swedish locale with blank thousands separator is unavailable. SKIP tests/misc/sort-h-thousands-sep.sh (exit status: 77) SKIP: tests/misc/sort-month =========================== sort-month.sh: skipped test: The locale utility is not present SKIP tests/misc/sort-month.sh (exit status: 77) SKIP: tests/misc/sort-spinlock-abuse ==================================== sort-spinlock-abuse.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-spinlock-abuse.sh (exit status: 77) SKIP: tests/misc/sort-stale-thread-mem ====================================== sort-stale-thread-mem.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-stale-thread-mem.sh (exit status: 77) SKIP: tests/misc/sort-u-FMR =========================== sort-u-FMR.sh: skipped test: requires a working valgrind SKIP tests/misc/sort-u-FMR.sh (exit status: 77) SKIP: tests/split/line-bytes ============================ line-bytes.sh: skipped test: this shell lacks ulimit support SKIP tests/split/line-bytes.sh (exit status: 77) SKIP: tests/misc/stty ===================== stty.sh: skipped test: no strace program SKIP tests/misc/stty.sh (exit status: 77) SKIP: tests/misc/stty-pairs =========================== stty-pairs.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/stty-pairs.sh (exit status: 77) SKIP: tests/misc/tac-continue ============================= tac-continue.sh: skipped test: FULL_PARTITION_TMPDIR not defined SKIP tests/misc/tac-continue.sh (exit status: 77) SKIP: tests/misc/timeout-group ============================== kill: illegal process group id: -1 timeout-group.sh: skipped test: requires kill with group signalling support SKIP tests/misc/timeout-group.sh (exit status: 77) SKIP: tests/misc/xattr ====================== cp: cannot preserve extended attributes, cp is built without xattr support xattr.sh: skipped test: coreutils built without xattr support SKIP tests/misc/xattr.sh (exit status: 77) SKIP: tests/cp/acl ================== acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/cp/acl.sh (exit status: 77) SKIP: tests/cp/sparse-extents ============================= sparse-extents.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-extents.sh (exit status: 77) SKIP: tests/cp/copy-FMR ======================= copy-FMR.sh: skipped test: requires a working valgrind SKIP tests/cp/copy-FMR.sh (exit status: 77) SKIP: tests/cp/sparse-perf ========================== sparse-perf.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-perf.sh (exit status: 77) SKIP: tests/cp/sparse-2 ======================= sparse-2.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-2.sh (exit status: 77) SKIP: tests/cp/nfs-removal-race =============================== ld: cannot find -ldl Cannot open "" nfs-removal-race.sh: skipped test: LD_PRELOAD was ineffective? SKIP tests/cp/nfs-removal-race.sh (exit status: 77) SKIP: tests/cp/perm =================== perm.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/cp/perm.sh (exit status: 77) SKIP: tests/df/no-mtab-status ============================= ld: cannot find -ldl Filesystem 1K-blocks Used Available Use% Mounted on /dev/dk0 6415870 4473796 1621282 74% / tmpfs 262028 0 262028 0% /tmp ptyfs 1 1 0 100% /dev/pts tmpfs 262028 0 262028 0% /var/shm no-mtab-status.sh: skipped test: no mntent.h available to confirm the interface SKIP tests/df/no-mtab-status.sh (exit status: 77) SKIP: tests/df/skip-duplicates ============================== ld: cannot find -ldl / skip-duplicates.sh: skipped test: no mntent.h available to confirm the interface SKIP tests/df/skip-duplicates.sh (exit status: 77) SKIP: tests/df/skip-rootfs ========================== Filesystem 1K-blocks Used Available Use% Mounted on /dev/dk0 6415870 4473802 1621276 74% / tmpfs 262028 0 262028 0% /tmp ptyfs 1 1 0 100% /dev/pts tmpfs 262028 0 262028 0% /var/shm skip-rootfs.sh: skipped test: no rootfs in mtab SKIP tests/df/skip-rootfs.sh (exit status: 77) SKIP: tests/dd/no-allocate ========================== no-allocate.sh: skipped test: this shell lacks ulimit support SKIP tests/dd/no-allocate.sh (exit status: 77) SKIP: tests/dd/nocache_eof ========================== nocache_eof.sh: skipped test: no strace program SKIP tests/dd/nocache_eof.sh (exit status: 77) SKIP: tests/du/2g ================= 2g.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/du/2g.sh (exit status: 77) SKIP: tests/du/fd-leak ====================== fd-leak.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/du/fd-leak.sh (exit status: 77) SKIP: tests/du/files0-from-dir ============================== files0-from-dir.sh: skipped test: cat dir/ succeeds SKIP tests/du/files0-from-dir.sh (exit status: 77) SKIP: tests/du/move-dir-while-traversing ======================================== ../tests/du/move-dir-while-traversing.sh: python: not found move-dir-while-traversing.sh: skipped test: python inotify package not installed SKIP tests/du/move-dir-while-traversing.sh (exit status: 77) SKIP: tests/id/gnu-zero-uids ============================ gnu-zero-uids.sh: skipped test: not running on GNU/Hurd SKIP tests/id/gnu-zero-uids.sh (exit status: 77) SKIP: tests/id/no-context ========================= grep: /proc/filesystems: No such file or directory no-context.sh: skipped test: this system lacks SELinux support SKIP tests/id/no-context.sh (exit status: 77) SKIP: tests/id/context ====================== grep: /proc/filesystems: No such file or directory context.sh: skipped test: this system lacks SELinux support SKIP tests/id/context.sh (exit status: 77) SKIP: tests/id/smack ==================== grep: /proc/filesystems: No such file or directory smack.sh: skipped test: this system lacks SMACK support SKIP tests/id/smack.sh (exit status: 77) SKIP: tests/install/install-C-selinux ===================================== grep: /proc/filesystems: No such file or directory install-C-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-C-selinux.sh (exit status: 77) SKIP: tests/install/install-Z-selinux ===================================== grep: /proc/filesystems: No such file or directory install-Z-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-Z-selinux.sh (exit status: 77) SKIP: tests/ls/getxattr-speedup =============================== ld: cannot find -ldl Cannot open "" getxattr-speedup.sh: skipped test: internal test failure: maybe LD_PRELOAD doesn't work? SKIP tests/ls/getxattr-speedup.sh (exit status: 77) SKIP: tests/ls/no-cap ===================== no-cap.sh: skipped test: no strace program SKIP tests/ls/no-cap.sh (exit status: 77) SKIP: tests/ls/removed-directory ================================ removed-directory.sh: skipped test: can't examine removed working directory on this platform SKIP tests/ls/removed-directory.sh (exit status: 77) SKIP: tests/ls/root-rel-symlink-color ===================================== root-rel-symlink-color.sh: skipped test: no relative symlink in / SKIP tests/ls/root-rel-symlink-color.sh (exit status: 77) SKIP: tests/ls/slink-acl ======================== ../tests/ls/slink-acl.sh: setfacl: not found slink-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/ls/slink-acl.sh (exit status: 77) SKIP: tests/ls/stat-free-color ============================== stat-free-color.sh: skipped test: no strace program SKIP tests/ls/stat-free-color.sh (exit status: 77) SKIP: tests/ls/stat-free-symlinks ================================= stat-free-symlinks.sh: skipped test: no strace program SKIP tests/ls/stat-free-symlinks.sh (exit status: 77) SKIP: tests/mkdir/p-acl ======================= ../tests/mkdir/p-acl.sh: setfacl: not found p-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/mkdir/p-acl.sh (exit status: 77) SKIP: tests/mkdir/selinux ========================= grep: /proc/filesystems: No such file or directory selinux.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/selinux.sh (exit status: 77) SKIP: tests/mkdir/restorecon ============================ grep: /proc/filesystems: No such file or directory restorecon.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/restorecon.sh (exit status: 77) SKIP: tests/mkdir/smack-no-root =============================== grep: /proc/filesystems: No such file or directory smack-no-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-no-root.sh (exit status: 77) SKIP: tests/mv/acl ================== acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/mv/acl.sh (exit status: 77) SKIP: tests/mv/atomic ===================== atomic.sh: skipped test: no strace program SKIP tests/mv/atomic.sh (exit status: 77) SKIP: tests/mv/atomic2 ====================== atomic2.sh: skipped test: no strace program SKIP tests/mv/atomic2.sh (exit status: 77) SKIP: tests/mv/i-3 ================== NetBSD i-3.sh: skipped test: known spurious failure on *BSD SKIP tests/mv/i-3.sh (exit status: 77) SKIP: tests/mv/leak-fd ====================== leak-fd.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/mv/leak-fd.sh (exit status: 77) SKIP: tests/mv/symlink-onto-hardlink-to-self ============================================ symlink-onto-hardlink-to-self.sh: skipped test: your kernel or file system cannot create a hard link to a symlink SKIP tests/mv/symlink-onto-hardlink-to-self.sh (exit status: 77) SKIP: tests/tail-2/big-4gb ========================== big-4gb.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail-2/big-4gb.sh (exit status: 77) FAIL: tests/tail-2/pipe-f2 ========================== --- exp 2023-03-14 23:17:53.441379436 +0100 +++ out 2023-03-14 23:17:53.442250998 +0100 @@ -1 +0,0 @@ -1 kill: 19953: No such process FAIL tests/tail-2/pipe-f2.sh (exit status: 1) FAIL: tests/touch/not-owner =========================== --- exp 2023-03-14 23:18:07.208285634 +0100 +++ out 2023-03-14 23:18:07.195356157 +0100 @@ -1 +1 @@ -touch: setting times of '/': Read-only file system +touch: cannot touch '/': File exists FAIL tests/touch/not-owner.sh (exit status: 1) SKIP: tests/chown/basic ======================= basic.sh: skipped test: must be run as root SKIP tests/chown/basic.sh (exit status: 77) SKIP: tests/cp/cp-a-selinux =========================== cp-a-selinux.sh: skipped test: must be run as root SKIP tests/cp/cp-a-selinux.sh (exit status: 77) SKIP: tests/cp/preserve-gid =========================== preserve-gid.sh: skipped test: must be run as root SKIP tests/cp/preserve-gid.sh (exit status: 77) SKIP: tests/cp/special-bits =========================== special-bits.sh: skipped test: must be run as root SKIP tests/cp/special-bits.sh (exit status: 77) SKIP: tests/cp/cp-mv-enotsup-xattr ================================== cp-mv-enotsup-xattr.sh: skipped test: must be run as root SKIP tests/cp/cp-mv-enotsup-xattr.sh (exit status: 77) SKIP: tests/cp/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/cp/capability.sh (exit status: 77) SKIP: tests/cp/sparse-extents-2 =============================== sparse-extents-2.sh: skipped test: insufficient SEEK_DATA support SKIP tests/cp/sparse-extents-2.sh (exit status: 77) SKIP: tests/cp/cross-dev-symlink ================================ cross-dev-symlink.sh: skipped test: must be run as root SKIP tests/cp/cross-dev-symlink.sh (exit status: 77) SKIP: tests/dd/skip-seek-past-dev ================================= skip-seek-past-dev.sh: skipped test: must be run as root SKIP tests/dd/skip-seek-past-dev.sh (exit status: 77) SKIP: tests/df/problematic-chars ================================ problematic-chars.sh: skipped test: must be run as root SKIP tests/df/problematic-chars.sh (exit status: 77) SKIP: tests/df/over-mount-device ================================ over-mount-device.sh: skipped test: must be run as root SKIP tests/df/over-mount-device.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle =================================== bind-mount-dir-cycle.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle-v2 ====================================== bind-mount-dir-cycle-v2.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle-v2.sh (exit status: 77) SKIP: tests/id/setgid ===================== setgid.sh: skipped test: must be run as root SKIP tests/id/setgid.sh (exit status: 77) SKIP: tests/install/install-C-root ================================== install-C-root.sh: skipped test: must be run as root SKIP tests/install/install-C-root.sh (exit status: 77) SKIP: tests/ls/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/ls/capability.sh (exit status: 77) SKIP: tests/ls/nameless-uid =========================== nameless-uid.sh: skipped test: must be run as root SKIP tests/ls/nameless-uid.sh (exit status: 77) SKIP: tests/misc/chcon ====================== chcon.sh: skipped test: must be run as root SKIP tests/misc/chcon.sh (exit status: 77) SKIP: tests/misc/chroot-credentials =================================== chroot-credentials.sh: skipped test: must be run as root SKIP tests/misc/chroot-credentials.sh (exit status: 77) SKIP: tests/misc/selinux ======================== selinux.sh: skipped test: must be run as root SKIP tests/misc/selinux.sh (exit status: 77) SKIP: tests/misc/truncate-owned-by-other ======================================== truncate-owned-by-other.sh: skipped test: must be run as root SKIP tests/misc/truncate-owned-by-other.sh (exit status: 77) SKIP: tests/mkdir/writable-under-readonly ========================================= writable-under-readonly.sh: skipped test: must be run as root SKIP tests/mkdir/writable-under-readonly.sh (exit status: 77) SKIP: tests/mkdir/smack-root ============================ grep: /proc/filesystems: No such file or directory smack-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-root.sh (exit status: 77) SKIP: tests/mv/hardlink-case ============================ hardlink-case.sh: skipped test: must be run as root SKIP tests/mv/hardlink-case.sh (exit status: 77) SKIP: tests/mv/sticky-to-xpart ============================== sticky-to-xpart.sh: skipped test: must be run as root SKIP tests/mv/sticky-to-xpart.sh (exit status: 77) SKIP: tests/rm/fail-2eperm ========================== fail-2eperm.sh: skipped test: must be run as root SKIP tests/rm/fail-2eperm.sh (exit status: 77) SKIP: tests/rm/no-give-up ========================= no-give-up.sh: skipped test: must be run as root SKIP tests/rm/no-give-up.sh (exit status: 77) SKIP: tests/rm/one-file-system ============================== one-file-system.sh: skipped test: must be run as root SKIP tests/rm/one-file-system.sh (exit status: 77) SKIP: tests/rm/read-only ======================== read-only.sh: skipped test: must be run as root SKIP tests/rm/read-only.sh (exit status: 77) SKIP: tests/rm/empty-immutable-skip =================================== empty-immutable-skip.sh: skipped test: must be run as root SKIP tests/rm/empty-immutable-skip.sh (exit status: 77) SKIP: tests/tail-2/append-only ============================== append-only.sh: skipped test: must be run as root SKIP tests/tail-2/append-only.sh (exit status: 77) SKIP: tests/tail-2/end-of-device ================================ end-of-device.sh: skipped test: must be run as root SKIP tests/tail-2/end-of-device.sh (exit status: 77) SKIP: tests/touch/now-owned-by-other ==================================== now-owned-by-other.sh: skipped test: must be run as root SKIP tests/touch/now-owned-by-other.sh (exit status: 77) SKIP: tests/factor/t00 ====================== t00.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t00.sh (exit status: 77) SKIP: tests/factor/t01 ====================== t01.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t01.sh (exit status: 77) SKIP: tests/factor/t02 ====================== t02.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t02.sh (exit status: 77) SKIP: tests/factor/t03 ====================== t03.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t03.sh (exit status: 77) SKIP: tests/factor/t04 ====================== t04.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t04.sh (exit status: 77) SKIP: tests/factor/t05 ====================== t05.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t05.sh (exit status: 77) SKIP: tests/factor/t06 ====================== t06.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t06.sh (exit status: 77) SKIP: tests/factor/t07 ====================== t07.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t07.sh (exit status: 77) SKIP: tests/factor/t08 ====================== t08.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t08.sh (exit status: 77) SKIP: tests/factor/t09 ====================== t09.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t09.sh (exit status: 77) SKIP: tests/factor/t10 ====================== t10.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t10.sh (exit status: 77) SKIP: tests/factor/t11 ====================== t11.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t11.sh (exit status: 77) SKIP: tests/factor/t12 ====================== t12.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t12.sh (exit status: 77) SKIP: tests/factor/t13 ====================== t13.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t13.sh (exit status: 77) SKIP: tests/factor/t14 ====================== t14.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t14.sh (exit status: 77) SKIP: tests/factor/t15 ====================== t15.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t15.sh (exit status: 77) SKIP: tests/factor/t16 ====================== t16.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t16.sh (exit status: 77) SKIP: tests/factor/t17 ====================== t17.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t17.sh (exit status: 77) SKIP: tests/factor/t18 ====================== t18.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t18.sh (exit status: 77) SKIP: tests/factor/t19 ====================== t19.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t19.sh (exit status: 77) SKIP: tests/factor/t20 ====================== t20.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t20.sh (exit status: 77) SKIP: tests/factor/t21 ====================== t21.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t21.sh (exit status: 77) SKIP: tests/factor/t22 ====================== t22.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t22.sh (exit status: 77) SKIP: tests/factor/t23 ====================== t23.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t23.sh (exit status: 77) SKIP: tests/factor/t24 ====================== t24.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t24.sh (exit status: 77) SKIP: tests/factor/t25 ====================== t25.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t25.sh (exit status: 77) SKIP: tests/factor/t26 ====================== t26.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t26.sh (exit status: 77) SKIP: tests/factor/t27 ====================== t27.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t27.sh (exit status: 77) SKIP: tests/factor/t28 ====================== t28.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t28.sh (exit status: 77) SKIP: tests/factor/t29 ====================== t29.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t29.sh (exit status: 77) SKIP: tests/factor/t30 ====================== t30.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t30.sh (exit status: 77) SKIP: tests/factor/t31 ====================== t31.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t31.sh (exit status: 77) SKIP: tests/factor/t32 ====================== t32.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t32.sh (exit status: 77) SKIP: tests/factor/t33 ====================== t33.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t33.sh (exit status: 77) SKIP: tests/factor/t34 ====================== t34.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t34.sh (exit status: 77) SKIP: tests/factor/t35 ====================== t35.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t35.sh (exit status: 77) SKIP: tests/factor/t36 ====================== t36.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t36.sh (exit status: 77)