Re: [Chicken-users] How do I build chicken for the MIPS arch?

[Mario Domenech Goulart]

Hi Ivan,

On Thu, 7 Feb 2013 17:45:31 -0200 Ivan Reche <address@hidden> wrote:

> I've tried to achieve it like the following:
>
> C_COMPILER=mipsel-linux-uclibc-gcc make PLATFORM=linux
>
> The compiler is from my MIPS toolchain and can be found through the
> PATH. It fails with this error:
>
> mipsel-linux-uclibc-gcc -fno-strict-aliasing -fwrapv
> -DHAVE_CHICKEN_CONFIG_H -DC_ENABLE_PTABLES -c apply-hack.x86-64.S -o
> apply-hack.x86-64.o
> apply-hack.x86-64.S: Assembler messages:
> apply-hack.x86-64.S:36: Error: unrecognized opcode `subq $8,%rsp'
> apply-hack.x86-64.S:37: Error: unrecognized opcode `movq %rdi,%r11'
> apply-hack.x86-64.S:38: Error: unrecognized opcode `movq %rsi,%r10'
> apply-hack.x86-64.S:39: Error: unrecognized opcode `cmpl $6,%edx'
> apply-hack.x86-64.S:40: Error: unrecognized opcode `ja l2'
> apply-hack.x86-64.S:41: Error: unrecognized opcode `je l3'
> apply-hack.x86-64.S:42: Error: unrecognized opcode `movq $6,%rbx'
> apply-hack.x86-64.S:43: Error: unrecognized opcode `subq %rdx,%rbx'
> apply-hack.x86-64.S:44: Error: unrecognized opcode `shlq $2,%rbx'
> apply-hack.x86-64.S:45: Error: unrecognized opcode `lea l3
> (%rip),%rdx'
> apply-hack.x86-64.S:46: Error: unrecognized opcode `addq %rdx,%rbx'
> apply-hack.x86-64.S:47: Error: unrecognized opcode `jmp *%rbx'
> apply-hack.x86-64.S:48: Error: unrecognized opcode `lea 48
> (%r10),%rsp'
> apply-hack.x86-64.S:49: Error: unrecognized opcode `movq 40
> (%r10),%r9'
> apply-hack.x86-64.S:50: Error: unrecognized opcode `movq 32
> (%r10),%r8'
> apply-hack.x86-64.S:51: Error: unrecognized opcode `movq 24
> (%r10),%rcx'
> apply-hack.x86-64.S:52: Error: unrecognized opcode `movq 16
> (%r10),%rdx'
> apply-hack.x86-64.S:53: Error: unrecognized opcode `movq 8
> (%r10),%rsi'
> apply-hack.x86-64.S:54: Error: unrecognized opcode `movq (%r10),%rdi'
> apply-hack.x86-64.S:55: Error: unrecognized opcode `xorq %rax,%rax'
> apply-hack.x86-64.S:56: Error: unrecognized opcode `call *%r11'
> make[1]: *** [apply-hack.x86-64.o] Error 1
> make[1]: Leaving directory `/home/ifilgueiras/sources/
> chicken-4.8.0.1'
> make: *** [all] Error 2
>
> Well, it makes sense, since this configuration is trying to use some
> x86 assembly in MIPS stuff. :)

Are you compiling chicken on the MIPS hardware or you are trying to
cross-compile it?

Best wishes.
Mario
-- 
http://parenteses.org/mario