Hi Friend,
I used zebra (0.91 version) to change hme0 ip address. I got the wrong netmask code. why? The process is following:
#zebra -d #running zebra
#telnet localhost 2601
Password: *****
Router>enable
Password:*****
Router# configure terminal
Router(config)# interface hme0
Router(config-if)# ip address 199.71.85.5/24
Router(config-if)#end
Note: Before I changed hme0 ip address, Its ip address is 199.71.85.1 netmask 255.255.255.0. When I wanted to use zebra to change hme0 to 199.71.85.5 netmask 255.255.255.0. I got netmask c74755ff using ifconfig -a command. The netmask should be ffffff00.