bug-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] libmachdev: Install as translator when bootstrapping && fix


From: Damien Zammit
Subject: Re: [PATCH] libmachdev: Install as translator when bootstrapping && fix rumpdisk injection
Date: Mon, 16 Nov 2020 12:14:42 +1100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.11.0

Hi,

On 16/11/20 11:04 am, Samuel Thibault wrote:
> I tried wd0, it does work (but my setup is using wd1, so doesn't boot :) )

Hmm, I have the same problem on my end trying to boot off wd1:

ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 100 MB, 203 cyl, 16 head, 63 sec, 512 bytes/sect x 204800 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
wd1 at atabus1 drive 0
wd1: <QEMU HARDDISK>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
Hurd bootstrap rumpdisk ext2fs: part:2:device:/dev/wd1: No such device or 
address
What would be interesting to see is the contents of "ls /dev" inside the 
rumpfs, but I can't get that very easily.

Damien



reply via email to

[Prev in Thread] Current Thread [Next in Thread]