[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#33676: GuixSD on eoma68-a20?
From: |
Danny Milosavljevic |
Subject: |
bug#33676: GuixSD on eoma68-a20? |
Date: |
Sat, 22 Dec 2018 00:09:57 +0100 |
Now I get:
$ # commit 39c676c4a3507863f4edf20b225ace4cbf646ed6
$ ./pre-inst-env guix system disk-image --system=armhf-linux -e '(begin
(use-modules (gnu system) (gnu bootloader) (gnu bootloader u-boot) (gnu system
install)) (operating-system (inherit installation-os) (bootloader
(bootloader-configuration (bootloader u-boot-bootloader) (target #f)))))' >QQQ3
2>&1
[...]
The following derivation will be built:
/gnu/store/shgfclh6yy1a03hl0c293s89y3qm9033-disk-image.drv
building /gnu/store/shgfclh6yy1a03hl0c293s89y3qm9033-disk-image.drv...
environment variable `PATH' set to
`/gnu/store/cm3j1pzdqhw4s9bg1drwlm3lw3qxzddj-qemu-minimal-3.1.0/bin:/gnu/store/hb2qj35yxmvxzcq99lbfcpija032wdzh-coreutils-8.30/bin'
creating raw image of 1265.54 MiB...
Formatting '/gnu/store/9wbw2vbpgg3pwlg9xr7jbniyca0nra2q-disk-image', fmt=raw
size=1327019190
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.11-gnu (nixbld@) (gcc version 5.5.0 (GCC)) #1
SMP 1
[ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: linux,dummy-virt
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x4f000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x50c
with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s38732 r8192 d22708
u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: panic=1
--load=/gnu/store/ip9p4q62fbgm2r2xnnh8qi5p77k2igas-linux-vm-loader
console=ttyAMA0
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 214952K/262144K available (9216K kernel code, 1133K
rwdata, 2612K rodata, 2048K init, 310K bss, 30808K reserved, 16384K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1134 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 311 kB)
[ 0.000000] ftrace: allocating 33359 entries in 98 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.003589] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every
4398046511096ns
[ 0.006045] Switching to timer-based delay loop, resolution 16ns
[ 0.308537] Console: colour dummy device 80x30
[ 0.365555] Calibrating delay loop (skipped), value calculated using timer
frequency.. 125.00 BogoMIPS (lpj=250000)
[ 0.373670] pid_max: default: 32768 minimum: 301
[ 0.426475] Security Framework initialized
[ 0.431096] Yama: becoming mindful.
[ 0.506448] AppArmor: AppArmor initialized
[ 0.535772] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.543395] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.965208] CPU: Testing write buffer coherency: ok
[ 0.998104] CPU0: Spectre v2: firmware did not set auxiliary control
register IBE bit, system vulnerable
[ 1.411470] /cpus/address@hidden missing clock-frequency property
[ 1.428729] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 1.698318] Setting up static identity map for 0x40100000 - 0x401000a0
[ 1.748454] rcu: Hierarchical SRCU implementation.
[ 1.926086] EFI services will not be available.
[ 1.993192] smp: Bringing up secondary CPUs ...
[ 1.994874] smp: Brought up 1 node, 1 CPU
[ 1.997851] SMP: Total of 1 processors activated (125.00 BogoMIPS).
[ 1.998883] CPU: All CPU(s) started in SVC mode.
[ 2.503281] devtmpfs: initialized
[ 3.198070] VFP support v0.3: implementor 41 architecture 4 part 30 variant
f rev 0
[ 3.746420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 3.775416] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 4.121161] pinctrl core: initialized pinctrl subsystem
[ 4.513079] DMI not present or invalid.
[ 4.901725] NET: Registered protocol family 16
[ 5.171532] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 5.247930] audit: initializing netlink subsys (disabled)
[ 5.429698] audit: type=2000 audit(3.640:1): state=initialized
audit_enabled=0 res=1
[ 5.571864] No ATAGs?
[ 5.603824] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 5.605465] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 5.716942] Serial: AMBA PL011 UART driver
[ 6.689400] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 54, base_baud =
0) is a PL011 rev1
[ 6.818013] console [ttyAMA0] enabled
[...]
[ 73.272363] pl061_gpio 9030000.pl061: PL061 GPIO chip @0x09030000 registered
[ 73.354536] pci-host-generic 4010000000.pcie: host bridge /address@hidden
ranges:
[ 73.383612] pci-host-generic 4010000000.pcie: IO 0x3eff0000..0x3effffff
-> 0x00000000
[ 73.405201] pci-host-generic 4010000000.pcie: MEM 0x10000000..0x3efeffff
-> 0x10000000
[ 73.413035] pci-host-generic 4010000000.pcie: MEM
0x8000000000..0xffffffffff -> 0x8000000000
[ 73.449129] pci-host-generic 4010000000.pcie: can't claim ECAM area [mem
0x10000000-0x1fffffff]: address conflict with address@hidden [mem
0x10000000-0x3efeffff]
[ 73.511869] pci-host-generic: probe of 4010000000.pcie failed with error -16
[ 74.049180] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 74.184595] Serial: AMBA driver
[...]
[ 78.969555] Run /init as init process
[ 80.062608] hrtimer: interrupt took 110418352 ns
GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread
GC Warning: Couldn't read /proc/stat
Welcome, this is GNU's early boot Guile.
Use '--repl' for an initrd REPL.
loading kernel modules...
[ 135.306635] SCSI subsystem initialized
[ 136.419610] Unable to handle kernel paging request at virtual address
ea0003ff
[ 136.432562] pgd = (ptrval)
[ 136.434175] [ea0003ff] *pgd=00000000
[ 136.443714] Internal error: Oops: 5 [#1] SMP ARM
[ 136.448388] Modules linked in: libata(+) scsi_mod
[ 136.459458] CPU: 0 PID: 1 Comm: init Not tainted 4.19.11-gnu #1
[ 136.461282] Hardware name: Generic DT based system
[ 136.477596] PC is at ata_attach_transport+0xd8/0x274 [libata]
[ 136.483380] LR is at 0x124
[ 136.484240] pc : [<bf05c190>] lr : [<00000124>] psr: 60000013
[ 136.485268] sp : ce0fdcf0 ip : ea0003ff fp : ce0fdd1c
[ 136.486473] r10: 00000000 r9 : ea00041f r8 : ea00040f
[ 136.487498] r7 : ce3fc8bc r6 : ce3fc8dc r5 : ce3fc8cc r4 : ce3fc800
[ 136.488614] r3 : ce0ed040 r2 : 00000000 r1 : c10d3b14 r0 : 00000000
[ 136.490476] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 136.492057] Control: 10c5387d Table: 4e34406a DAC: 00000051
[ 136.494159] Process init (pid: 1, stack limit = 0x(ptrval))
[ 136.495663] Stack: (0xce0fdcf0 to 0xce0fe000)
[ 136.499157] dce0: 00000001 00000000
bf0778c8 c1005dcc
[ 136.501950] dd00: bf079000 ffffffff bf078000 00000000 ce0fdd9c ce0fdd20
bf077c10 bf05c0c4
[ 136.504080] dd20: c0f1e6b0 bf06f140 c1005dcc ce0fdd38 c01ceb30 bf078000
ce0fdd54 ffffffff
[ 136.506036] dd40: c0155458 c01ceb24 ce0fdd7c ce0fdd58 c01bbaac c01553d0
c10067b4 d082000c
[ 136.508122] dd60: ce0fdda8 d0820000 d0821000 f28f9aeb ce0fdda4 bf06ef40
bf0778c8 c1005dcc
[ 136.510236] dd80: 00000000 bf06ef4c bf06ef40 c1005dcc ce0fde14 ce0fdda0
c01035d8 bf0778d4
[ 136.512143] dda0: c0101a0c f28f9aeb ce327600 c0979f74 ce000600 ce000600
ce0fddd4 ce0fddc8
[ 136.514144] ddc0: c0979f74 c01ce7d0 ce0fde14 ce0fddd8 c0308ab4 c0979f50
ce0fde04 ce0fdde8
[ 136.516233] dde0: c0309c5c c03090e4 00000052 f28f9aeb ce0fdf38 bf06ef40
ce0fdf38 ce3321c0
[ 136.518293] de00: bf06f070 bf06ef4c ce0fde3c ce0fde18 c01fb75c c0103594
ce0fde3c ce0fde28
[ 136.520436] de20: c02f3410 00000000 ce0fdf38 bf06f040 ce0fdf14 ce0fde40
c01fa210 c01fb6f4
[ 136.522398] de40: ffff8000 00007fff bf06ef40 c01f778c ce0fde98 d0820000
c1005dcc c0a08334
[ 136.524853] de60: bf06f054 bf06ef44 00000a2c bf071000 014f9cf8 c0c3d374
ffffffff c0c5b674
[ 136.526866] de80: c0101204 ce0fc000 ce0fdf14 ce0fde98 bf062024 00000006
bf062054 000000bf
[ 136.528885] dea0: 00000000 00000000 6e72656b 00006c65 00000000 00000000
00000000 00000000
[ 136.531078] dec0: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000
[ 136.533045] dee0: 00000000 f28f9aeb 7fffffff c1005dcc 00000000 0000000a
014f9cf8 c0101204
[ 136.534976] df00: ce0fc000 0000017b ce0fdfa4 ce0fdf18 c01fa9c4 c01f84e4
7fffffff 00000000
[ 136.537150] df20: 00000003 ce0fc000 ce0fdf5c d08cf000 00051ca8 00000000
d08f06f3 d08fefc0
[ 136.539224] df40: d08cf000 00051ca8 d09201e0 d091ff38 d0909544 0002d000
0002f250 00000000
[ 136.541281] df60: 00000000 00000000 0001490c 00000042 00000043 0000003c
0000002a 0000001b
[ 136.543248] df80: 00000000 f28f9aeb 00000004 b58dac90 00053e77 0000017b
00000000 ce0fdfa8
[ 136.545223] dfa0: c0101000 c01fa8f4 00000004 b58dac90 0000000a 014f9cf8
00000000 015bbf78
[ 136.548002] dfc0: 00000004 b58dac90 00053e77 0000017b 002b39d0 0029b25c
00161fec 00000002
[ 136.550771] dfe0: bec661d0 bec661c0 0005c7a9 0011d1e2 60000030 0000000a
00000000 00000000
[ 136.578059] [<bf05c190>] (ata_attach_transport [libata]) from [<bf077c10>]
(ata_init+0x348/0x39c [libata])
[ 136.589371] [<bf077c10>] (ata_init [libata]) from [<c01035d8>]
(do_one_initcall+0x50/0x214)
[ 136.596083] [<c01035d8>] (do_one_initcall) from [<c01fb75c>]
(do_init_module+0x74/0x224)
[ 136.598342] [<c01fb75c>] (do_init_module) from [<c01fa210>]
(load_module+0x1d38/0x2228)
[ 136.599851] [<c01fa210>] (load_module) from [<c01fa9c4>]
(sys_finit_module+0xdc/0x110)
[ 136.601640] [<c01fa9c4>] (sys_finit_module) from [<c0101000>]
(ret_fast_syscall+0x0/0x54)
[ 136.603227] Exception stack(0xce0fdfa8 to 0xce0fdff0)
[ 136.605053] dfa0: 00000004 b58dac90 0000000a 014f9cf8
00000000 015bbf78
[ 136.607122] dfc0: 00000004 b58dac90 00053e77 0000017b 002b39d0 0029b25c
00161fec 00000002
[ 136.608630] dfe0: bec661d0 bec661c0 0005c7a9 0011d1e2
[ 136.616749] Code: e59fc1a0 e3a0ef49 e28c8010 e28c9020 (e89c000f)
[ 136.631449] ---[ end trace c34b1e9ba28742f3 ]---
And then it hangs seemingly indefinitely.
pgpLmURdcpNK0.pgp
Description: OpenPGP digital signature
- bug#33676: GuixSD on eoma68-a20?, (continued)
- bug#33676: GuixSD on eoma68-a20?, Andreas Enge, 2018/12/09
- bug#33676: GuixSD on eoma68-a20?, Danny Milosavljevic, 2018/12/10
- bug#33676: GuixSD on eoma68-a20?, Andreas Enge, 2018/12/10
- bug#33676: GuixSD on eoma68-a20?, Danny Milosavljevic, 2018/12/14
- bug#33676: GuixSD on eoma68-a20?, Andreas Enge, 2018/12/15
- bug#33676: GuixSD on eoma68-a20?, Mark H Weaver, 2018/12/15
- bug#33676: GuixSD on eoma68-a20?, Andreas Enge, 2018/12/16
- bug#33676: GuixSD on eoma68-a20?, Danny Milosavljevic, 2018/12/15
- bug#33676: GuixSD on eoma68-a20?,
Danny Milosavljevic <=
- bug#33676: GuixSD on eoma68-a20?, swedebugia, 2018/12/22
- bug#33676: GuixSD on eoma68-a20?, Danny Milosavljevic, 2018/12/22
- bug#33676: GuixSD on eoma68-a20?, swedebugia, 2018/12/23
- bug#33676: GuixSD on eoma68-a20?, swedebugia, 2018/12/23
- bug#33676: GuixSD on eoma68-a20?, swedebugia, 2018/12/22
- bug#33676: GuixSD on eoma68-a20?, Danny Milosavljevic, 2018/12/22
- bug#33676: ENOSPC upon offloading, Ludovic Courtès, 2018/12/14
bug#33676: GuixSD on eoma68-a20?, Luke Kenneth Casson Leighton, 2018/12/10