[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [bugs #6846] Grub 0.93 refuses to boot from Highpoint 370/2 IDEgives
From: |
Vizitiu, Ciprian |
Subject: |
RE: [bugs #6846] Grub 0.93 refuses to boot from Highpoint 370/2 IDEgives out Error 21 |
Date: |
Mon, 1 Dec 2003 10:26:47 +0100 |
Maybe related: IBM e-server with ServeRAID SCSI controller same problem:
one can "see" the disks from a bootable floppy (or from the booted Linux
partition) but a grub 0.93 will not boot, it will just hang the machine
RESET is needed; reverting to 0.92 fixes the problem.
> [bugs #6846] Full Item Snapshot:
>
> URL: <http://savannah.gnu.org/bugs/?func=detailitem&item_id=6846>
> Project: GNU GRUB
> Submitted by: 0
> On: Fri 11/28/2003 at 13:40
>
> Category: Booting
> Severity: Major
> Priority: 5 - Normal
> Item Group: Software Error
> Resolution: None
> Assigned to: None
> Originator Name: ElFarto
> Originator Email: address@hidden
> Status: Open
> Release: 0.93
> Reproducibility: Every Time
> Planned Release:
>
>
> Summary: Grub 0.93 refuses to boot from Highpoint 370/2 IDE
> gives out Error 21
>
> Original Submission: I have a soyo P4 mainboard which has a
> on board Highpoint 370/372 RAID IDE Controller, even when
> using the controller in NON RAID mode, Grub 0.93 just craps
> out with an Error 21 after trying to load stage 2, it's
> remarkable to mention that i solved the problem by rolling
> back to Grub 0.92 that seems to handle the hpt controller in
> the right way, if i boot with a grub floppy into the grub
> console i can see the hard disk connected to the hpt
> controller detected as hd0
>
> the disk is used to boot linux, and has 3 partitions
> (boot,swap,root) formatted with ext3 FS.
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- RE: [bugs #6846] Grub 0.93 refuses to boot from Highpoint 370/2 IDEgives out Error 21,
Vizitiu, Ciprian <=