[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re:SCSI-Problem
From: |
Christian Stalp |
Subject: |
Re:SCSI-Problem |
Date: |
Fri, 25 Jan 2002 23:38:40 +0100 |
> do you have an SCSi controller which can be used to boot from ?
> (BIOS extension on SCSI board, BIOS support, etc....)
Yes its a Dawicontrol DC2980U2W with its own BIOS. I can also set the scsi-id
with which the system can boot.
> Do you need the IDE disks to boot. You can simple remove the
> IDE entries in the first BIOS page to "NONE", "NONE", ... etc
This I have allready done, it was the only way to install lilo on the SCSI
disks!!!
> The the system has to boot from SCSI ! GRUB cannot see the
> IDE disks either, but the running Linux can access them
> (the IDE controller must not be disabled !).
>
> What do you have for a computer. The SCSI/IDE boot sequence is
> very very old ...
Its a FIC 2013 mainboard from 1998-99. It supports SCSI-boot but it scans
the IDE-devices first.
> Do you use an externel IDE adapter card (not onboard) ?
No I don't.
Gruss Christian
--
Christian Stalp address@hidden
Wiesbaden / Germany address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re:SCSI-Problem,
Christian Stalp <=