[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: pxegrubwon't work
From: |
Jochen Hoenicke |
Subject: |
Re: pxegrubwon't work |
Date: |
Fri, 18 Jan 2002 17:25:17 +0100 |
On Friday, 18. January 2002 15:33, you wrote:
> # dd if=stage1/stage1 of=/dev/fd0 bs=512 count=1
> # dd if=stage2/pxegrub of=/dev/fd0 bs=512 seek=1
>
> that's what the manual told me (at least i think so)
>
> but grub won't run, stuck with "GRUB" and that's it
> if i take stage2 instead of pxegrub as the 2nd stage bootimage,
> everything is fine, the grubshells starts and works as expected.
> but i need the pxe-option to make it boot by themself.
pxegrub is only meant to be booted by pxe. The main difference to
stage2 is a special header so that PXE compliant network cards can
load it.
You should use the --enable-diskless configure option and install
stage2 instead.
Jochen
- pxegrubwon't work, Thoralf Will, 2002/01/18
- Re: pxegrubwon't work,
Jochen Hoenicke <=