[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bug-gnucap] Fwd: BSIM3v3.1 fixes
From: |
Al Davis |
Subject: |
[Bug-gnucap] Fwd: BSIM3v3.1 fixes |
Date: |
Tue, 14 Jan 2003 13:54:49 -0700 |
---------- Forwarded Message ----------
Subject: BSIM3v3.1 fixes
Date: Tue, 14 Jan 2003 23:02:11 +0300
From: "Dmitry Nadezhin" <address@hidden>
To: address@hidden
Cc: address@hidden
Albert,
I had to do little fixes to use BSIM3v3.1 model. I used
gnucap-0.32 sources. Possibly, you have already done these
fixes.
In "d_mos7.model:325" "name=pdiblcb" -> "name=PDIBLCB",
otherwise "W0" was treated as "Wpdiblcb=0".
In "d_mos7.model:286..289" I swapped definitions of "UB1" and
"UB". Otherwise "UB1" in model file was treated as "UB=1".
In "d_mos7.model:290..295: I swapped "UC1" and "UC" similary.
Unfortunately, this fix is not 100% correct. It will fail when
parameter list will contain two consequent settings" "UB1=nn
UB1=nn".
I think that more correct solution is to demand separator
(blank or equation sign) between parameter name and parameter
value. If you agree, I can modify parsing routines.
-Dmitry
-------------------------------------------------------
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Bug-gnucap] Fwd: BSIM3v3.1 fixes,
Al Davis <=