GNU DDD 3.3.12 (x86_64-unknown-linux-gnu) Copyright (C) 1995-1999 Technische Universität Braunschweig, Germany. Copyright (C) 1999-2001 Universität Passau, Germany. Copyright (C) 2001 Universität des Saarlandes, Germany. Copyright (C) 2001-2009 Free Software Foundation, Inc. Compiled with GCC 7.1.0, GNU libc 2.17 Requires X11R6, Xt11R6, Motif 2.3.4 (Motif Version 2.3.4) Includes XPM 3.4.11, Athena Panner (7000002L), DDD core Built 2018-01-18 by Tim Tautges . $ ddd + /bin/sh -c 'exec gdb -q -fullname' # Hello, world! # Opening session "10a2b730f45d2f0456156813879368102900000223500108"... # Enabling core dumps... # Enabling core dumps...done. # Running GDB (pid 4734, tty /dev/pts/4)... # Current language: C/C++ # Searching "vsllib/ddd.vsl"... # Trying "/u/xeonwi01/people/timt/.ddd/vsllib/ddd.vsl" # Trying "/u/xeonwi01/people/timt/share/ddd-3.3.12/vsllib/ddd.vsl" # Searching "vsllib/ddd.vsl"..."/u/xeonwi01/people/timt/share/ddd-3.3.12/vsllib/ddd.vsl". # Creating "/u/xeonwi01/people/timt/.ddd/"... # Creating "/u/xeonwi01/people/timt/.ddd/"...done. # Creating "/u/xeonwi01/people/timt/.ddd/sessions/"... # Creating "/u/xeonwi01/people/timt/.ddd/sessions/"...done. # Creating "/u/xeonwi01/people/timt/.ddd/themes/"... # Creating "/u/xeonwi01/people/timt/.ddd/themes/"...done. # Creating "/u/xeonwi01/people/timt/.ddd/sessions/10a2b730f45d2f0456156813879368102900000223500108/"... # Creating "/u/xeonwi01/people/timt/.ddd/sessions/10a2b730f45d2f0456156813879368102900000223500108/"...done. # Saving session in "/u/xeonwi01/people/timt/.ddd/sessions/10a2b730f45d2f0456156813879368102900000223500108/init"... # Saving session in "/u/xeonwi01/people/timt/.ddd/sessions/10a2b730f45d2f0456156813879368102900000223500108/init"...done. 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "set prompt (gdb) \n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "set height 0\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "set width 0\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "set annotate 1\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> " set verbose off\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info line\n" 2019.09.10 13:06:34 <- "No line number information available.\n" "(gdb) " 2019.09.10 13:06:34 -> "list\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line\n" 2019.09.10 13:06:34 <- "No line number information available.\n" "(gdb) " 2019.09.10 13:06:34 -> "output 4711\n" 2019.09.10 13:06:34 <- "4711(gdb) " 2019.09.10 13:06:34 -> "show language\n" 2019.09.10 13:06:34 <- "The current source language is \"auto; currently c\".\n" "(gdb) " 2019.09.10 13:06:34 -> "show version\n" 2019.09.10 13:06:34 <- "GNU gdb (GDB) 8.0\n" "Copyright (C) 2017 Free Software Foundation, Inc.\n" "License GPLv3+: GNU GPL version 3 or later \n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\n" "and \"show warranty\" for details.\n" "This GDB was configured as \"x86_64-pc-linux-gnu\".\n" "Type \"show configuration\" for configuration details.\n" "For bug reporting instructions, please see:\n" ".\n" "Find the GDB manual and other documentation resources online at:\n" ".\n" "For help, type \"help\".\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "(gdb) " 2019.09.10 13:06:34 -> "pwd\n" 2019.09.10 13:06:34 <- "Working directory /u/xeonwi01/people/timt.\n" "(gdb) " 2019.09.10 13:06:34 -> "info breakpoints\n" 2019.09.10 13:06:34 <- "No breakpoints or watchpoints.\n" "(gdb) " 2019.09.10 13:06:34 -> "show history filename\n" 2019.09.10 13:06:34 <- "The filename in which to record the command history is \"/u/xeonwi01/people/timt/.gdb_history\".\n" "(gdb) " 2019.09.10 13:06:34 -> "show history size\n" 2019.09.10 13:06:34 <- "The size of the command history is 256.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info sources\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line MAIN\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info files\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info line main_\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info program\n" 2019.09.10 13:06:34 <- "The program being debugged is not being run.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line MAIN_\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line main__\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line MAIN__\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line _main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line _MAIN\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line __main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line __MAIN\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line my_main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line the_main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line vxworks_main\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info line main_vxworks\n" 2019.09.10 13:06:34 <- "No symbol table is loaded. Use the \"file\" command.\n" "(gdb) " 2019.09.10 13:06:34 -> "set confirm off\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "source /tmp/dddnS7Do3\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info breakpoints\n" 2019.09.10 13:06:34 <- "No breakpoints or watchpoints.\n" "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "# reset\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info breakpoints\n" 2019.09.10 13:06:34 <- "No breakpoints or watchpoints.\n" "(gdb) " 2019.09.10 13:06:34 -> "display\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info display\n" 2019.09.10 13:06:34 <- "There are no auto-display expressions now.\n" "(gdb) " 2019.09.10 13:06:34 -> "set environment TERM dumb\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info source\n" 2019.09.10 13:06:34 <- "No current source file.\n" "(gdb) " 2019.09.10 13:06:34 -> "info files\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "info program\n" 2019.09.10 13:06:34 <- "The program being debugged is not being run.\n" "(gdb) " # Creating options in "/u/xeonwi01/people/timt/.ddd/init"... # Creating options in "/u/xeonwi01/people/timt/.ddd/init"...done. # Opening session "10a2b730f45d2f0456156813879368102900000223500108"...done. # Welcome to DDD 3.3.12 "Dale Head" (x86_64-unknown-linux-gnu) 2019.09.10 13:06:34 -> "help detach\n" 2019.09.10 13:06:34 <- "Detach a process or file previously attached.\n" "If a process, it is no longer traced, and it continues its execution. If\n" "you were debugging a file, the file is closed and gdb no longer accesses it.\n" "\n" "List of detach subcommands:\n" "\n" "detach checkpoint -- Detach from a checkpoint (experimental)\n" "detach inferiors -- Detach from inferior ID (or list of IDS)\n" "\n" "Type \"help detach\" followed by detach subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help run\n" 2019.09.10 13:06:34 <- "Start debugged program. You may specify arguments to give it.\n" "Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n" "Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n" "\n" "With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n" "To cancel previous arguments and run with no arguments,\n" "use \"set args\" without arguments.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help step\n" 2019.09.10 13:06:34 <- "Step program until it reaches a different source line.\n" "Usage: step [N]\n" "Argument N means step N times (or till program stops for another reason).\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help stepi\n" 2019.09.10 13:06:34 <- "Step one instruction exactly.\n" "Usage: stepi [N]\n" "Argument N means step N times (or till program stops for another reason).\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help next\n" 2019.09.10 13:06:34 <- "Step program, proceeding through subroutine calls.\n" "Usage: next [N]\n" "Unlike \"step\", if the current source line calls a subroutine,\n" "this command does not enter the subroutine, but instead steps over\n" "the call, in effect treating it as a single source line.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help nexti\n" 2019.09.10 13:06:34 <- "Step one instruction, but proceed through subroutine calls.\n" "Usage: nexti [N]\n" "Argument N means step N times (or till program stops for another reason).\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help until\n" 2019.09.10 13:06:34 <- "Execute until the program reaches a source line greater than the current\n" "or a specified location (same args as break command) within the current frame.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help finish\n" 2019.09.10 13:06:34 <- "Execute until selected stack frame returns.\n" "Usage: finish\n" "Upon return, the value returned is printed and put in the value history.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help cont\n" 2019.09.10 13:06:34 <- "Continue program being debugged, after signal or breakpoint.\n" "Usage: continue [N]\n" "If proceeding from breakpoint, a number N may be used as an argument,\n" "which means to set the ignore count of that breakpoint to N - 1 (so that\n" "the breakpoint won\'t break until the Nth time it is reached).\n" "\n" "If non-stop mode is enabled, continue only the current thread,\n" "otherwise all the threads in the program are continued. To \n" "continue all stopped threads in non-stop mode, use the -a option.\n" "Specifying -a and an ignore count simultaneously is an error.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help signal\n" 2019.09.10 13:06:34 <- "Continue program with the specified signal.\n" "Usage: signal SIGNAL\n" "The SIGNAL argument is processed the same as the handle command.\n" "\n" "An argument of \"0\" means continue the program without sending it a signal.\n" "This is useful in cases where the program stopped because of a signal,\n" "and you want to resume the program while discarding the signal.\n" "\n" "In a multi-threaded program the signal is delivered to, or discarded from,\n" "the current thread only.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:34 -> "help kill\n" 2019.09.10 13:06:34 <- "Kill execution of program being debugged.\n" "\n" "List of kill subcommands:\n" "\n" "kill inferiors -- Kill inferior ID (or list of IDs)\n" "\n" "Type \"help kill\" followed by kill subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:34 <- "(gdb) " 2019.09.10 13:06:35 -> "help up\n" 2019.09.10 13:06:35 <- "Select and print stack frame that called this one.\n" "An argument says how many frames up to go.\n" 2019.09.10 13:06:35 <- "(gdb) " 2019.09.10 13:06:35 -> "help down\n" 2019.09.10 13:06:35 <- "Select and print stack frame called by this one.\n" "An argument says how many frames down to go.\n" 2019.09.10 13:06:35 <- "(gdb) " # Enabling line numbers... # Enabling line numbers...done. # Retrieving GDB Settings... # Retrieving GDB Settings... 2019.09.10 13:06:47 -> "help set\n" 2019.09.10 13:06:47 <- "Evaluate expression EXP and assign result to variable VAR, using assignment\n" "syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n" "example). VAR may be a debugger \"convenience\" variable (names starting\n" "with $), a register (a few standard names starting with $), or an actual\n" "variable in the program being debugged. EXP is any valid expression.\n" "Use \"set variable\" for variables with names identical to set subcommands.\n" "\n" "With a subcommand, this command modifies parts of the gdb environment.\n" "You can see these environment settings with the \"show\" command.\n" "\n" "List of set subcommands:\n" "\n" "set ada -- Prefix command for changing Ada-specfic settings\n" "set agent -- Set debugger\'s willingness to use agent as a helper\n" "set annotate -- Set annotation_level\n" "set architecture -- Set architecture of target\n" "set args -- Set argument list to give program being debugged when it is started\n" "set auto-connect-native-target -- Set whether GDB may automatically connect to the native target\n" "set auto-load -- Auto-loading specific settings\n" "set auto-solib-add -- Set autoloading of shared library symbols\n" "set backtrace -- Set backtrace specific variables\n" "set basenames-may-differ -- Set whether a source file may have multiple base names\n" "set breakpoint -- Breakpoint specific settings\n" "set can-use-hw-watchpoints -- Set debugger\'s willingness to use watchpoint hardware\n" "set case-sensitive -- Set case sensitivity in name search\n" "set charset -- Set the host and target character sets\n" "set check -- Set the status of the type/range checker\n" "set circular-trace-buffer -- Set target\'s use of circular trace buffer\n" "set code-cache -- Set cache use for code segment access\n" "set coerce-float-to-double -- Set coercion of floats to doubles when calling functions\n" "set compile-args -- Set compile command GCC command-line arguments\n" "set complaints -- Set max number of complaints about incorrect symbols\n" "set confirm -- Set whether to confirm potentially dangerous operations\n" "set cp-abi -- Set the ABI used for inspecting C++ objects\n" "set data-directory -- Set GDB\'s data directory\n" "set dcache -- Use this command to set number of lines in dcache and line-size\n" "set debug -- Generic command for setting gdb debugging flags\n" "set debug-file-directory -- Set the directories where separate debug symbols are searched for\n" "set default-collect -- Set the list of expressions to collect by default\n" "set demangle-style -- Set the current C++ demangling style\n" "set detach-on-fork -- Set whether gdb will detach the child of a fork\n" "set directories -- Set the search path for finding source files\n" "set disable-randomization -- Set disabling of debuggee\'s virtual address space randomization\n" "set disassemble-next-line -- Set whether to disassemble next source line or insn when execution stops\n" "set disassembler-options -- Set the disassembler options\n" "set disassembly-flavor -- Set the disassembly flavor\n" "set disconnected-dprintf -- Set whether dprintf continues after GDB disconnects\n" "set disconnected-tracing -- Set whether tracing continues after GDB disconnects\n" "set displaced-stepping -- Set debugger\'s willingness to use displaced stepping\n" "set dprintf-channel -- Set the channel to use for dynamic printf\n" "set dprintf-function -- Set the function to use for dynamic printf\n" "set dprintf-style -- Set the style of usage for dynamic printf\n" "set editing -- Set editing of command lines as they are typed\n" "set endian -- Set endianness of target\n" "set environment -- Set environment variable value to give the program\n" "set exec-direction -- Set direction of execution\n" "set exec-done-display -- Set notification of completion for asynchronous execution commands\n" "set exec-wrapper -- Set a wrapper for running programs\n" "set extended-prompt -- Set the extended prompt\n" "set extension-language -- Set mapping between filename extension and source language\n" "set filename-display -- Set how to display filenames\n" "set follow-exec-mode -- Set debugger response to a program call of exec\n" "set follow-fork-mode -- Set debugger response to a program call of fork or vfork\n" "set frame-filter -- Prefix command for \'set\' frame-filter related operations\n" "set gnutarget -- Set the current BFD target\n" "set guile -- Prefix command for Guile preference settings\n" "set height -- Set number of lines in a page for GDB output pagination\n" "set history -- Generic command for setting command history parameters\n" "set host-charset -- Set the host character set\n" "set inferior-tty -- Set terminal for future runs of program being debugged\n" "set input-radix -- Set default input radix for entering numbers\n" "set interactive-mode -- Set whether GDB\'s standard input is a terminal\n" "set language -- Set the current source language\n" "set libthread-db-search-path -- Set search path for libthread_db\n" "set listsize -- Set number of source lines gdb will list by default\n" "set logging -- Set logging options\n" "set max-completions -- Set maximum number of completion candidates\n" "set max-user-call-depth -- Set the max call depth for non-python/scheme user-defined commands\n" "set max-value-size -- Set maximum sized value gdb will load from the inferior\n" "set may-insert-breakpoints -- Set permission to insert breakpoints in the target\n" "set may-insert-fast-tracepoints -- Set permission to insert fast tracepoints in the target\n" "set may-insert-tracepoints -- Set permission to insert tracepoints in the target\n" "set may-interrupt -- Set permission to interrupt or signal the target\n" "set may-write-memory -- Set permission to write into target memory\n" "set may-write-registers -- Set permission to write into registers\n" 2019.09.10 13:06:47 <- "set mem -- Memory regions settings\n" "set mi-async -- Set whether MI asynchronous mode is enabled\n" "set mpx -- Set Intel Memory Protection Extensions specific variables\n" "set multiple-symbols -- Set the debugger behavior when more than one symbol are possible matches\n" "set non-stop -- Set whether gdb controls the inferior in non-stop mode\n" "set observer -- Set whether gdb controls the inferior in observer mode\n" "set opaque-type-resolution -- Set resolution of opaque struct/class/union types (if set before loading symbols)\n" "set osabi -- Set OS ABI of target\n" "set output-radix -- Set default output radix for printing of values\n" "set overload-resolution -- Set overload resolution in evaluating C++ functions\n" "set pagination -- Set state of GDB output pagination\n" "set print -- Generic command for setting how things print\n" "set prompt -- Set gdb\'s prompt\n" "set python -- Prefix command for python preference settings\n" "set radix -- Set default input and output number radices\n" "set range-stepping -- Enable or disable range stepping\n" "set record -- Set record options\n" "set remote -- Remote protocol specific variables\n" "set remoteaddresssize -- Set the maximum size of the address (in bits) in a memory packet\n" "set remotecache -- Set cache use for remote targets\n" "set remoteflow -- Set use of hardware flow control for remote serial I/O\n" "set remotelogbase -- Set numerical base for remote session logging\n" "set remotelogfile -- Set filename for remote session recording\n" "set remotetimeout -- Set timeout limit to wait for target to respond\n" "set remotewritesize -- Set the maximum number of bytes per memory write packet (deprecated)\n" "set schedule-multiple -- Set mode for resuming threads of all processes\n" "set scheduler-locking -- Set mode for locking scheduler during execution\n" "set script-extension -- Set mode for script filename extension recognition\n" "set serial -- Set default serial/parallel port configuration\n" "set solib-absolute-prefix -- Set an alternate system root\n" "set solib-search-path -- Set the search path for loading non-absolute shared library symbol files\n" "set stack-cache -- Set cache use for stack access\n" "set startup-with-shell -- Set use of shell to start subprocesses\n" "set step-mode -- Set mode of the step operation\n" "set stop-on-solib-events -- Set stopping for shared library events\n" "set struct-convention -- Set the convention for returning small structs\n" "set substitute-path -- Usage: set substitute-path FROM TO\n" "set sysroot -- Set an alternate system root\n" "set target-charset -- Set the target character set\n" "set target-file-system-kind -- Set assumed file system kind for target reported file names\n" "set target-wide-charset -- Set the target wide character set\n" "set tcp -- TCP protocol specific variables\n" "set tdesc -- Set target description specific variables\n" "set trace-buffer-size -- Set requested size of trace buffer\n" "set trace-commands -- Set tracing of GDB CLI commands\n" "set trace-notes -- Set notes string to use for current and future trace runs\n" "set trace-stop-notes -- Set notes string to use for future tstop commands\n" "set trace-user -- Set the user name to use for current and future trace runs\n" "set trust-readonly-sections -- Set mode for reading from readonly sections\n" "set tui -- TUI configuration variables\n" "set unwind-on-terminating-exception -- Set unwinding of stack if std::terminate is called while in call dummy\n" "set unwindonsignal -- Set unwinding of stack if a signal is received while in a call dummy\n" "set use-coredump-filter -- Set whether gcore should consider /proc/PID/coredump_filter\n" "set use-deprecated-index-sections -- Set whether to use deprecated gdb_index sections\n" "set variable -- Evaluate expression EXP and assign result to variable VAR\n" "set verbose -- Set verbosity\n" "set watchdog -- Set watchdog timer\n" "set width -- Set number of characters where GDB should wrap lines of its output\n" "set write -- Set writing into executable and core files\n" "\n" "Type \"help set\" followed by set subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" "(gdb) " 2019.09.10 13:06:47 -> "help set ada\n" 2019.09.10 13:06:47 <- "Prefix command for changing Ada-specfic settings\n" "\n" "List of set ada subcommands:\n" "\n" "set ada print-signatures -- Enable or disable the output of formal and return types for functions in the overloads selection menu\n" "set ada trust-PAD-over-XVS -- Enable or disable an optimization trusting PAD types over XVS types\n" "\n" "Type \"help set ada\" followed by set ada subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set ada print-signatures\n" 2019.09.10 13:06:47 <- "Enable or disable the output of formal and return types for functions in the overloads selection menu\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set ada trust-PAD-over-XVS\n" 2019.09.10 13:06:47 <- "Enable or disable an optimization trusting PAD types over XVS types\n" "This is related to the encoding used by the GNAT compiler. The debugger\n" "should normally trust the contents of PAD types, but certain older versions\n" "of GNAT have a bug that sometimes causes the information in the PAD type\n" "to be incorrect. Turning this setting \"off\" allows the debugger to\n" "work around this bug. It is always safe to turn this option \"off\", but\n" "this incurs a slight performance penalty, so it is recommended to NOT change\n" "this option to \"off\" unless necessary.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show agent\n" 2019.09.10 13:06:47 <- "Debugger\'s willingness to use agent in inferior as a helper is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show annotate\n" 2019.09.10 13:06:47 <- "Annotation_level is 1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show architecture\n" 2019.09.10 13:06:47 <- "The target architecture is set automatically (currently i386)\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show auto-connect-native-target\n" 2019.09.10 13:06:47 <- "Whether GDB may automatically connect to the native target is on.\n" "(gdb) " 2019.09.10 13:06:47 -> "help set auto-load\n" 2019.09.10 13:06:47 <- "Auto-loading specific settings.\n" "Configure various auto-load-specific variables such as\n" "automatic loading of Python scripts.\n" "\n" "List of set auto-load subcommands:\n" "\n" "set auto-load gdb-scripts -- Enable or disable auto-loading of canned sequences of commands scripts\n" "set auto-load libthread-db -- Enable or disable auto-loading of inferior specific libthread_db\n" "set auto-load local-gdbinit -- Enable or disable auto-loading of .gdbinit script in current directory\n" "set auto-load python-scripts -- Set the debugger\'s behaviour regarding auto-loaded Python scripts\n" "set auto-load safe-path -- Set the list of files and directories that are safe for auto-loading\n" "set auto-load scripts-directory -- Set the list of directories from which to load auto-loaded scripts\n" "\n" "Type \"help set auto-load\" followed by set auto-load subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set auto-load gdb-scripts\n" 2019.09.10 13:06:47 <- "Enable or disable auto-loading of canned sequences of commands scripts.\n" "If enabled, canned sequences of commands are loaded when the debugger reads\n" "an executable or shared library.\n" "This options has security implications for untrusted inferiors.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set auto-load libthread-db\n" 2019.09.10 13:06:47 <- "Enable or disable auto-loading of inferior specific libthread_db.\n" "If enabled, libthread_db will be searched in \'set libthread-db-search-path\'\n" "locations to load libthread_db compatible with the inferior.\n" "Standard system libthread_db still gets loaded even with this option off.\n" "This options has security implications for untrusted inferiors.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set auto-load local-gdbinit\n" 2019.09.10 13:06:47 <- "Enable or disable auto-loading of .gdbinit script in current directory.\n" "If enabled, canned sequences of commands are loaded when debugger starts\n" "from .gdbinit file in current directory. Such files are deprecated,\n" "use a script associated with inferior executable file instead.\n" "This options has security implications for untrusted inferiors.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show auto-load python-scripts\n" 2019.09.10 13:06:47 <- "Auto-loading of Python scripts is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show auto-load safe-path\n" 2019.09.10 13:06:47 <- "List of directories from which it is safe to auto-load files is $debugdir:$datadir/auto-load.\n" "(gdb) " 2019.09.10 13:06:47 -> "show auto-load scripts-directory\n" 2019.09.10 13:06:47 <- "List of directories from which to load auto-loaded scripts is $debugdir:$datadir/auto-load.\n" "(gdb) " 2019.09.10 13:06:47 -> "show auto-solib-add\n" 2019.09.10 13:06:47 <- "Autoloading of shared library symbols is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show backtrace\n" 2019.09.10 13:06:47 <- "limit: An upper bound on the number of backtrace levels is unlimited.\n" "past-entry: Whether backtraces should continue past the entry point of a program is off.\n" "past-main: Whether backtraces should continue past \"main\" is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set backtrace\n" 2019.09.10 13:06:47 <- "Set backtrace specific variables.\n" "Configure backtrace variables such as the backtrace limit\n" "\n" "List of set backtrace subcommands:\n" "\n" "set backtrace limit -- Set an upper bound on the number of backtrace levels\n" "set backtrace past-entry -- Set whether backtraces should continue past the entry point of a program\n" "set backtrace past-main -- Set whether backtraces should continue past \"main\"\n" "\n" "Type \"help set backtrace\" followed by set backtrace subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show backtrace limit\n" 2019.09.10 13:06:47 <- "An upper bound on the number of backtrace levels is unlimited.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show backtrace past-entry\n" 2019.09.10 13:06:47 <- "Whether backtraces should continue past the entry point of a program is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show backtrace past-main\n" 2019.09.10 13:06:47 <- "Whether backtraces should continue past \"main\" is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show basenames-may-differ\n" 2019.09.10 13:06:47 <- "Whether a source file may have multiple base names is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set breakpoint\n" 2019.09.10 13:06:47 <- "Breakpoint specific settings\n" "Configure various breakpoint-specific variables such as\n" "pending breakpoint behavior\n" "\n" "List of set breakpoint subcommands:\n" "\n" "set breakpoint always-inserted -- Set mode for inserting breakpoints\n" "set breakpoint auto-hw -- Set automatic usage of hardware breakpoints\n" "set breakpoint condition-evaluation -- Set mode of breakpoint condition evaluation\n" "set breakpoint pending -- Set debugger\'s behavior regarding pending breakpoints\n" "\n" "Type \"help set breakpoint\" followed by set breakpoint subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show breakpoint always-inserted\n" 2019.09.10 13:06:47 <- "Always inserted breakpoint mode is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show breakpoint auto-hw\n" 2019.09.10 13:06:47 <- "Automatic usage of hardware breakpoints is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show breakpoint condition-evaluation\n" 2019.09.10 13:06:47 <- "Breakpoint condition evaluation mode is auto (currently host).\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show breakpoint pending\n" 2019.09.10 13:06:47 <- "Debugger\'s behavior regarding pending breakpoints is auto.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show can-use-hw-watchpoints\n" 2019.09.10 13:06:47 <- "Debugger\'s willingness to use watchpoint hardware is 1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show case-sensitive\n" 2019.09.10 13:06:47 <- "Case sensitivity in name search is \"auto; currently on\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show charset\n" 2019.09.10 13:06:47 <- "The host character set is \"auto; currently UTF-8\".\n" "The target character set is \"auto; currently UTF-8\".\n" "The target wide character set is \"auto; currently UTF-32\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set charset\n" 2019.09.10 13:06:47 <- "Set the host and target character sets.\n" "The `host character set\' is the one used by the system GDB is running on.\n" "The `target character set\' is the one used by the program being debugged.\n" "You may only use supersets of ASCII for your host character set; GDB does\n" "not support any others.\n" "To see a list of the character sets GDB supports, type `set charset \'.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show check\n" 2019.09.10 13:06:47 <- "range: Range checking is \"auto; currently off\".\n" "type: Strict type checking is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set check\n" 2019.09.10 13:06:47 <- "Set the status of the type/range checker.\n" "\n" "List of set check subcommands:\n" "\n" "set check range -- Set range checking\n" "set check type -- Set strict type checking\n" "\n" "Type \"help set check\" followed by set check subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show check range\n" 2019.09.10 13:06:47 <- "Range checking is \"auto; currently off\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show check type\n" 2019.09.10 13:06:47 <- "Strict type checking is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show circular-trace-buffer\n" 2019.09.10 13:06:47 <- "Target\'s use of circular trace buffer is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show code-cache\n" 2019.09.10 13:06:47 <- "Cache use for code accesses is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show coerce-float-to-double\n" 2019.09.10 13:06:47 <- "Coercion of floats to doubles when calling functions is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show compile-args\n" 2019.09.10 13:06:47 <- "Compile command command-line arguments are \"-O0 -gdwarf-4 -fPIE -Wall -Wno-implicit-function-declaration -Wno-unused-but-set-variable -Wno-unused-variable -fno-stack-protector\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show complaints\n" 2019.09.10 13:06:47 <- "Max number of complaints about incorrect symbols is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show confirm\n" 2019.09.10 13:06:47 <- "Whether to confirm potentially dangerous operations is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show cp-abi\n" 2019.09.10 13:06:47 <- "The currently selected C++ ABI is \"auto\" (currently \"gnu-v3\").\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show data-directory\n" 2019.09.10 13:06:47 <- "GDB\'s data directory is \"/u/xeonwi01/people/timt/share/gdb\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set dcache\n" 2019.09.10 13:06:47 <- "Use this command to set number of lines in dcache and line-size.\n" "\n" "List of set dcache subcommands:\n" "\n" "set dcache line-size -- Set dcache line size in bytes (must be power of 2)\n" "set dcache size -- Set number of dcache lines\n" "\n" "Type \"help set dcache\" followed by set dcache subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dcache line-size\n" 2019.09.10 13:06:47 <- "Dcache line size is 64.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dcache size\n" 2019.09.10 13:06:47 <- "Number of dcache lines is 4096.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set debug\n" 2019.09.10 13:06:47 <- "Generic command for setting gdb debugging flags\n" "\n" "List of set debug subcommands:\n" "\n" "set debug arch -- Set architecture debugging\n" "set debug auto-load -- Set auto-load verifications debugging\n" "set debug bfd-cache -- Set bfd cache debugging\n" "set debug check-physname -- Set cross-checking of \"physname\" code against demangler\n" "set debug coff-pe-read -- Set coff PE read debugging\n" "set debug compile -- Set compile command debugging\n" "set debug displaced -- Set displaced stepping debugging\n" "set debug dwarf-die -- Set debugging of the DWARF DIE reader\n" "set debug dwarf-line -- Set debugging of the dwarf line reader\n" "set debug dwarf-read -- Set debugging of the DWARF reader\n" "set debug entry-values -- Set entry values and tail call frames debugging\n" "set debug expression -- Set expression debugging\n" "set debug frame -- Set frame debugging\n" "set debug infrun -- Set inferior debugging\n" "set debug jit -- Set JIT debugging\n" "set debug libthread-db -- Set libthread-db debugging\n" "set debug lin-lwp -- Set debugging of GNU/Linux lwp module\n" "set debug linux-namespaces -- Set debugging of GNU/Linux namespaces module\n" "set debug notification -- Set debugging of async remote notification\n" "set debug observer -- Set observer debugging\n" "set debug overload -- Set debugging of C++ overloading\n" "set debug parser -- Set parser debugging\n" "set debug py-unwind -- Set Python unwinder debugging\n" "set debug record -- Set debugging of record/replay feature\n" "set debug remote -- Set debugging of remote protocol\n" "set debug serial -- Set serial debugging\n" "set debug stap-expression -- Set SystemTap expression debugging\n" "set debug symbol-lookup -- Set debugging of symbol lookup\n" "set debug symfile -- Set debugging of the symfile functions\n" "set debug symtab-create -- Set debugging of symbol table creation\n" "set debug target -- Set target debugging\n" "set debug timestamp -- Set timestamping of debugging messages\n" "set debug varobj -- Set varobj debugging\n" "set debug xml -- Set XML parser debugging\n" "\n" "Type \"help set debug\" followed by set debug subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug arch\n" 2019.09.10 13:06:47 <- "Architecture debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug auto-load\n" 2019.09.10 13:06:47 <- "Debugging output for files of \'set auto-load ...\' is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug bfd-cache\n" 2019.09.10 13:06:47 <- "BFD cache debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug check-physname\n" 2019.09.10 13:06:47 <- "Whether to check \"physname\" is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug coff-pe-read\n" 2019.09.10 13:06:47 <- "Coff PE read debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug compile\n" 2019.09.10 13:06:47 <- "Compile debugging is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug displaced\n" 2019.09.10 13:06:47 <- "Displace stepping debugging is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug dwarf-die\n" 2019.09.10 13:06:47 <- "Debugging of the DWARF DIE reader is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug dwarf-line\n" 2019.09.10 13:06:47 <- "Debugging of the dwarf line reader is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug dwarf-read\n" 2019.09.10 13:06:47 <- "Debugging of the DWARF reader is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug entry-values\n" 2019.09.10 13:06:47 <- "Entry values and tail call frames debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug expression\n" 2019.09.10 13:06:47 <- "Expression debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug frame\n" 2019.09.10 13:06:47 <- "Frame debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug infrun\n" 2019.09.10 13:06:47 <- "Inferior debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug jit\n" 2019.09.10 13:06:47 <- "JIT debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug libthread-db\n" 2019.09.10 13:06:47 <- "libthread-db debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug lin-lwp\n" 2019.09.10 13:06:47 <- "Debugging of GNU/Linux lwp module is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug linux-namespaces\n" 2019.09.10 13:06:47 <- "Debugging of GNU/Linux namespaces module is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug notification\n" 2019.09.10 13:06:47 <- "Debugging of async remote notification is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug observer\n" 2019.09.10 13:06:47 <- "Observer debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug overload\n" 2019.09.10 13:06:47 <- "Debugging of C++ overloading is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug parser\n" 2019.09.10 13:06:47 <- "Parser debugging is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug py-unwind\n" 2019.09.10 13:06:47 <- "Python unwinder debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug record\n" 2019.09.10 13:06:47 <- "Debugging of process record target is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug remote\n" 2019.09.10 13:06:47 <- "Debugging of remote protocol is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug serial\n" 2019.09.10 13:06:47 <- "Serial debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug stap-expression\n" 2019.09.10 13:06:47 <- "SystemTap Probe expression debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug symbol-lookup\n" 2019.09.10 13:06:47 <- "Debugging of symbol lookup is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug symfile\n" 2019.09.10 13:06:47 <- "Symfile debugging is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug symtab-create\n" 2019.09.10 13:06:47 <- "Debugging of symbol table creation is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug target\n" 2019.09.10 13:06:47 <- "Target debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug timestamp\n" 2019.09.10 13:06:47 <- "Timestamping debugging messages is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug varobj\n" 2019.09.10 13:06:47 <- "Varobj debugging is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug xml\n" 2019.09.10 13:06:47 <- "XML debugging is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show debug-file-directory\n" 2019.09.10 13:06:47 <- "The directory where separate debug symbols are searched for is \"/u/xeona01/people/jasonk/opt/gdb8/lib/debug\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show default-collect\n" 2019.09.10 13:06:47 <- "The list of expressions to collect by default is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show demangle-style\n" 2019.09.10 13:06:47 <- "The current C++ demangling style is \"auto\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show detach-on-fork\n" 2019.09.10 13:06:47 <- "Whether gdb will detach the child of a fork is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show directories\n" 2019.09.10 13:06:47 <- "Source directories searched: $cdir:$cwd\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disable-randomization\n" 2019.09.10 13:06:47 <- "Disabling randomization of debuggee\'s virtual address space is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disassemble-next-line\n" 2019.09.10 13:06:47 <- "Debugger\'s willingness to use disassemble-next-line is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disassembler-options\n" 2019.09.10 13:06:47 <- "The current disassembler options are \'\'\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disassembly-flavor\n" 2019.09.10 13:06:47 <- "The disassembly flavor is \"att\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disconnected-dprintf\n" 2019.09.10 13:06:47 <- "Whether dprintf continues after GDB disconnects is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show disconnected-tracing\n" 2019.09.10 13:06:47 <- "Whether tracing continues after GDB disconnects is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show displaced-stepping\n" 2019.09.10 13:06:47 <- "Debugger\'s willingness to use displaced stepping to step over breakpoints is auto (currently off).\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dprintf-channel\n" 2019.09.10 13:06:47 <- "The channel to use for dynamic printf is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dprintf-function\n" 2019.09.10 13:06:47 <- "The function to use for dynamic printf is \"printf\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dprintf-style\n" 2019.09.10 13:06:47 <- "The style of usage for dynamic printf is \"gdb\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show editing\n" 2019.09.10 13:06:47 <- "Editing of command lines as they are typed is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show endian\n" 2019.09.10 13:06:47 <- "The target endianness is set automatically (currently little endian)\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show environment\n" 2019.09.10 13:06:47 <- "XDG_VTNR=2\n" "MANPATH=/star/starmirror/git/latest/linux-x86_64/share/man:/star/starmirror/git/latest/linux-x86_64/share/man:/star/starmirror/git/latest/linux-x86_64/share/man:/star/starmirror/git/latest/linux-x86_64/share/man:/star/starmirror/git/latest/linux-x86_64/share/man:\n" "MIRROR_HOME=/star/starmirror\n" "MATE_DESKTOP_SESSION_ID=this-is-deprecated\n" "MOAB_DIR=/u/xeonwi01/people/timt/moab\n" "SSH_AGENT_PID=22513\n" "XDG_SESSION_ID=34571\n" "HOSTNAME=xeonwi01\n" "IMSETTINGS_INTEGRATE_DESKTOP=yes\n" "TERM=dumb\n" "VTE_VERSION=5202\n" "SHELL=/bin/bash\n" "HISTSIZE=1000\n" "WINDOWID=48234502\n" "SurfaceMeshWidgetDebugController=1\n" "QTDIR=/usr/lib64/qt-3.3\n" "QTINC=/usr/lib64/qt-3.3/include\n" "IMSETTINGS_MODULE=none\n" "QT_GRAPHICSSYSTEM_CHECKED=1\n" "USER=timt\n" "JRE_HOME=/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre\n" "LD_LIBRARY_PATH=/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/lib64:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/lib\n" "SSH_AUTH_SOCK=/run/user/1237/keyring/ssh\n" "TERMCAP=\n" "USERNAME=timt\n" "SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/22350,unix/unix:/tmp/.ICE-unix/22350\n" "PAGER=cat\n" "DDD=ddd-3.3.12-x86_64-unknown-linux-gnu\n" "DESKTOP_SESSION=mate\n" "MAIL=/var/spool/mail/timt\n" "PATH=/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/12.06/12.06.010/STAR-CCM+12.06.010/star/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/u/xeonwi01/people/timt/.local/bin:/u/xeonwi01/people/timt/bin\n" "VTUNE_HOME=/opt\n" "QT_IM_MODULE=xim\n" "_=/u/xeonwi01/people/timt/bin/ddd\n" "XDG_SESSION_TYPE=x11\n" "PWD=/u/xeonwi01/people/timt\n" "XMODIFIERS=@im=none\n" "JAVA_HOME=/star/starmirror/jdk/linux-x86_64/jdk11.0.3\n" "ENABLE_PART_POINTS=T\n" "LANG=en_US.UTF-8\n" "GDM_LANG=en_US.UTF-8\n" "MODULEPATH=/usr/share/Modules/modulefiles:/etc/modulefiles\n" "LOADEDMODULES=\n" "KDEDIRS=/usr\n" "GIT_TEMPLATE_DIR=/star/starmirror/git/latest/linux-x86_64/share/git-core/templates\n" "NSS_DEFAULT_DB_TYPE=sql\n" "GDMSESSION=mate\n" "SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass\n" "HISTCONTROL=ignoredups\n" "SHLVL=2\n" "HOME=/u/xeonwi01/people/timt\n" "XDG_SEAT=seat0\n" "GTK_OVERLAY_SCROLLING=0\n" "ENABLE_PARTS_MESHING=T\n" "XDG_SESSION_DESKTOP=mate\n" "LOGNAME=timt\n" "QTLIB=/usr/lib64/qt-3.3/lib\n" "DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-xTe5Thhk4s,guid=3210948ce8dd111851f5032b5d5c4b49\n" "XDG_DATA_DIRS=/u/xeonwi01/people/timt/.local/share/flatpak/exports/share/:/var/lib/flatpak/exports/share/:/usr/local/share/:/usr/share/\n" "MODULESHOME=/usr/share/Modules\n" "LESSOPEN=||/usr/bin/lesspipe.sh %s\n" "WINDOWPATH=2:2\n" "XDG_RUNTIME_DIR=/run/user/1237\n" "DISPLAY=:0\n" "QT_PLUGIN_PATH=/usr/lib64/kde4/plugins:/usr/lib/kde4/plugins\n" "XDG_CURRENT_DESKTOP=MATE\n" "GTK_IM_MODULE=gtk-im-context-simple\n" "GIT_EXEC_PATH=/star/starmirror/git/latest/linux-x86_64/libexec/git-core\n" "XAUTHORITY=/run/gdm/auth-for-timt-qX9seF/database\n" "COLORTERM=truecolor\n" "BASH_FUNC_module()=() { eval `/usr/bin/modulecmd bash $*`\n" "}\n" "LINES=24\n" "COLUMNS=80\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set environment\n" 2019.09.10 13:06:47 <- "Set environment variable value to give the program.\n" "Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n" "VALUES of environment variables are uninterpreted strings.\n" "This does not affect the program until the next \"run\" command.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show exec-direction\n" 2019.09.10 13:06:47 <- "Forward.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show exec-done-display\n" 2019.09.10 13:06:47 <- "Notification of completion for asynchronous execution commands is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show exec-wrapper\n" 2019.09.10 13:06:47 <- "The wrapper for running programs is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show extended-prompt\n" 2019.09.10 13:06:47 <- "The extended prompt is not set.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show filename-display\n" 2019.09.10 13:06:47 <- "Filenames are displayed as \"relative\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show follow-exec-mode\n" 2019.09.10 13:06:47 <- "Follow exec mode is \"same\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show follow-fork-mode\n" 2019.09.10 13:06:47 <- "Debugger response to a program call of fork or vfork is \"parent\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set frame-filter\n" 2019.09.10 13:06:47 <- "Prefix command for \'set\' frame-filter related operations.\n" "\n" "List of set frame-filter subcommands:\n" "\n" "set frame-filter priority -- GDB command to set the priority of the specified frame-filter\n" "\n" "Type \"help set frame-filter\" followed by set frame-filter subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set frame-filter priority\n" 2019.09.10 13:06:47 <- "GDB command to set the priority of the specified frame-filter.\n" "\n" " Usage: set frame-filter priority DICTIONARY NAME PRIORITY\n" "\n" " DICTIONARY is the name of the frame filter dictionary on which to\n" " operate. Named dictionaries are: \"global\" for the global frame\n" " filter dictionary, \"progspace\" for the program space\'s framefilter\n" " dictionary. If either of these two are not specified, the\n" " dictionary name is assumed to be the name of the object-file name.\n" "\n" " NAME matches the name of the frame filter to operate on.\n" "\n" " PRIORITY is the an integer to assign the new priority to the frame\n" " filter.\n" " \n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show gnutarget\n" 2019.09.10 13:06:47 <- "The current BFD target is \"auto\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set guile\n" 2019.09.10 13:06:47 <- "Prefix command for Guile preference settings.\n" "\n" "List of set guile subcommands:\n" "\n" "set guile print-stack -- Set mode for Guile exception printing on error\n" "\n" "Type \"help set guile\" followed by set guile subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show guile print-stack\n" 2019.09.10 13:06:47 <- "The mode of Guile exception printing on error is \"message\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show height\n" 2019.09.10 13:06:47 <- "Number of lines gdb thinks are in a page is unlimited.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set history\n" 2019.09.10 13:06:47 <- "Generic command for setting command history parameters.\n" "\n" "List of set history subcommands:\n" "\n" "set history expansion -- Set history expansion on command input\n" "set history filename -- Set the filename in which to record the command history\n" "set history remove-duplicates -- Set how far back in history to look for and remove duplicate entries\n" "set history save -- Set saving of the history record on exit\n" "set history size -- Set the size of the command history\n" "\n" "Type \"help set history\" followed by set history subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show history expansion\n" 2019.09.10 13:06:47 <- "History expansion on command input is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show history filename\n" 2019.09.10 13:06:47 <- "The filename in which to record the command history is \"/u/xeonwi01/people/timt/.gdb_history\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show history remove-duplicates\n" 2019.09.10 13:06:47 <- "The number of history entries to look back at for duplicates is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show history save\n" 2019.09.10 13:06:47 <- "Saving of the history record on exit is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show history size\n" 2019.09.10 13:06:47 <- "The size of the command history is 256.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show host-charset\n" 2019.09.10 13:06:47 <- "The host character set is \"auto; currently UTF-8\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show inferior-tty\n" 2019.09.10 13:06:47 <- "Terminal for future runs of program being debugged is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show input-radix\n" 2019.09.10 13:06:47 <- "Default input radix for entering numbers is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show interactive-mode\n" 2019.09.10 13:06:47 <- "Debugger\'s interactive mode is auto (currently on).\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show language\n" 2019.09.10 13:06:47 <- "The current source language is \"auto; currently c\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show libthread-db-search-path\n" 2019.09.10 13:06:47 <- "The current search path or libthread_db is \"$sdir:$pdir\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show listsize\n" 2019.09.10 13:06:47 <- "Number of source lines gdb will list by default is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show logging\n" 2019.09.10 13:06:47 <- "Future logs will be written to gdb.txt.\n" "Logs will be appended to the log file.\n" "Output will be logged and displayed.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set logging\n" 2019.09.10 13:06:47 <- "Set logging options\n" "\n" "List of set logging subcommands:\n" "\n" "set logging file -- Set the current logfile\n" "set logging off -- Disable logging\n" "set logging on -- Enable logging\n" "set logging overwrite -- Set whether logging overwrites or appends to the log file\n" "set logging redirect -- Set the logging output mode\n" "\n" "Type \"help set logging\" followed by set logging subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show logging file\n" 2019.09.10 13:06:47 <- "The current logfile is \"gdb.txt\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set logging off\n" 2019.09.10 13:06:47 <- "Disable logging.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set logging on\n" 2019.09.10 13:06:47 <- "Enable logging.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show logging overwrite\n" 2019.09.10 13:06:47 <- "Whether logging overwrites or appends to the log file is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show logging redirect\n" 2019.09.10 13:06:47 <- "The logging output mode is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show max-completions\n" 2019.09.10 13:06:47 <- "Maximum number of completion candidates is 200.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show max-user-call-depth\n" 2019.09.10 13:06:47 <- "The max call depth for user-defined commands is 1024.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show max-value-size\n" 2019.09.10 13:06:47 <- "Maximum value size is 65536 bytes.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-insert-breakpoints\n" 2019.09.10 13:06:47 <- "Permission to insert breakpoints in the target is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-insert-fast-tracepoints\n" 2019.09.10 13:06:47 <- "Permission to insert fast tracepoints in the target is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-insert-tracepoints\n" 2019.09.10 13:06:47 <- "Permission to insert tracepoints in the target is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-interrupt\n" 2019.09.10 13:06:47 <- "Permission to interrupt or signal the target is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-write-memory\n" 2019.09.10 13:06:47 <- "Permission to write into target memory is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show may-write-registers\n" 2019.09.10 13:06:47 <- "Permission to write into registers is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set mem\n" 2019.09.10 13:06:47 <- "Memory regions settings\n" "\n" "List of set mem subcommands:\n" "\n" "set mem inaccessible-by-default -- Set handling of unknown memory regions\n" "\n" "Type \"help set mem\" followed by set mem subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show mem inaccessible-by-default\n" 2019.09.10 13:06:47 <- "Unknown memory addresses will be treated as inaccessible.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show mi-async\n" 2019.09.10 13:06:47 <- "Whether MI is in asynchronous mode is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show mpx\n" 2019.09.10 13:06:47 <- "bound: Intel Memory Protection Extensions not supported on this target.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show multiple-symbols\n" 2019.09.10 13:06:47 <- "How the debugger handles ambiguities in expressions is \"all\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show non-stop\n" 2019.09.10 13:06:47 <- "Controlling the inferior in non-stop mode is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show observer\n" 2019.09.10 13:06:47 <- "Observer mode is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show opaque-type-resolution\n" 2019.09.10 13:06:47 <- "Resolution of opaque struct/class/union types (if set before loading symbols) is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show osabi\n" 2019.09.10 13:06:47 <- "The current OS ABI is \"auto\" (currently \"GNU/Linux\").\n" "The default OS ABI is \"GNU/Linux\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set osabi\n" 2019.09.10 13:06:47 <- "Set OS ABI of target.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show output-radix\n" 2019.09.10 13:06:47 <- "Default output radix for printing of values is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show overload-resolution\n" 2019.09.10 13:06:47 <- "Overload resolution in evaluating C++ functions is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show pagination\n" 2019.09.10 13:06:47 <- "State of pagination is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set print\n" 2019.09.10 13:06:47 <- "Generic command for setting how things print.\n" "\n" "List of set print subcommands:\n" "\n" "set print address -- Set printing of addresses\n" "set print array -- Set pretty formatting of arrays\n" "set print array-indexes -- Set printing of array indexes\n" "set print asm-demangle -- Set demangling of C++/ObjC names in disassembly listings\n" "set print demangle -- Set demangling of encoded C++/ObjC names when displaying symbols\n" "set print elements -- Set limit on string chars or array elements to print\n" "set print entry-values -- Set printing of function arguments at function entry\n" "set print frame-arguments -- Set printing of non-scalar frame arguments\n" "set print inferior-events -- Set printing of inferior events (e.g.\n" "set print max-symbolic-offset -- Set the largest offset that will be printed in form\n" "set print null-stop -- Set printing of char arrays to stop at first null char\n" "set print object -- Set printing of object\'s derived type based on vtable info\n" "set print pascal_static-members -- Set printing of pascal static members\n" "set print pretty -- Set pretty formatting of structures\n" "set print raw -- Generic command for setting what things to print in \"raw\" mode\n" "set print repeats -- Set threshold for repeated print elements\n" "set print sevenbit-strings -- Set printing of 8-bit characters in strings as \\n" "nn\n" "set print static-members -- Set printing of C++ static members\n" "set print symbol -- Set printing of symbol names when printing pointers\n" "set print symbol-filename -- Set printing of source filename and line number with \n" "set print symbol-loading -- Set printing of symbol loading messages\n" "set print thread-events -- Set printing of thread events (such as thread start and exit)\n" "set print type -- Generic command for setting how types print\n" "set print union -- Set printing of unions interior to structures\n" "set print vtbl -- Set printing of C++ virtual function tables\n" "\n" "Type \"help set print\" followed by set print subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print address\n" 2019.09.10 13:06:47 <- "Printing of addresses is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print array\n" 2019.09.10 13:06:47 <- "Pretty formatting of arrays is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print array-indexes\n" 2019.09.10 13:06:47 <- "Printing of array indexes is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print asm-demangle\n" 2019.09.10 13:06:47 <- "Demangling of C++/ObjC names in disassembly listings is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print demangle\n" 2019.09.10 13:06:47 <- "Demangling of encoded C++/ObjC names when displaying symbols is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print elements\n" 2019.09.10 13:06:47 <- "Limit on string chars or array elements to print is 200.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print entry-values\n" 2019.09.10 13:06:47 <- "Printing of function arguments at function entry is \"default\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print frame-arguments\n" 2019.09.10 13:06:47 <- "Printing of non-scalar frame arguments is \"scalars\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print inferior-events\n" 2019.09.10 13:06:47 <- "Printing of inferior events is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print max-symbolic-offset\n" 2019.09.10 13:06:47 <- "The largest offset that will be printed in form is unlimited.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print null-stop\n" 2019.09.10 13:06:47 <- "Printing of char arrays to stop at first null char is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print object\n" 2019.09.10 13:06:47 <- "Printing of object\'s derived type based on vtable info is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print pascal_static-members\n" 2019.09.10 13:06:47 <- "Printing of pascal static members is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print pretty\n" 2019.09.10 13:06:47 <- "Pretty formatting of structures is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set print raw\n" 2019.09.10 13:06:47 <- "Generic command for setting what things to print in \"raw\" mode.\n" "\n" "List of set print raw subcommands:\n" "\n" "set print raw frame-arguments -- Set whether to print frame arguments in raw form\n" "\n" "Type \"help set print raw\" followed by set print raw subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print raw frame-arguments\n" 2019.09.10 13:06:47 <- "Whether to print frame arguments in raw form is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print repeats\n" 2019.09.10 13:06:47 <- "Threshold for repeated print elements is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print sevenbit-strings\n" 2019.09.10 13:06:47 <- "Printing of 8-bit characters in strings as \\n" "nn is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print static-members\n" 2019.09.10 13:06:47 <- "Printing of C++ static members is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print symbol\n" 2019.09.10 13:06:47 <- "Printing of symbols when printing pointers is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print symbol-filename\n" 2019.09.10 13:06:47 <- "Printing of source filename and line number with is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print symbol-loading\n" 2019.09.10 13:06:47 <- "Printing of symbol loading messages is \"full\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print thread-events\n" 2019.09.10 13:06:47 <- "Printing of thread events is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set print type\n" 2019.09.10 13:06:47 <- "Generic command for setting how types print.\n" "\n" "List of show print type subcommands:\n" "\n" "show print type methods -- Set printing of methods defined in classes\n" "show print type typedefs -- Set printing of typedefs defined in classes\n" "\n" "Type \"help show print type\" followed by show print type subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print type methods\n" 2019.09.10 13:06:47 <- "Printing of methods defined in a class in on\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print type typedefs\n" 2019.09.10 13:06:47 <- "Printing of typedefs defined in a class in on\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print union\n" 2019.09.10 13:06:47 <- "Printing of unions interior to structures is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show print vtbl\n" 2019.09.10 13:06:47 <- "Printing of C++ virtual function tables is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show prompt\n" 2019.09.10 13:06:47 <- "Gdb\'s prompt is \"(gdb) \".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set python\n" 2019.09.10 13:06:47 <- "Prefix command for python preference settings.\n" "\n" "List of set python subcommands:\n" "\n" "set python print-stack -- Set mode for Python stack dump on error\n" "\n" "Type \"help set python\" followed by set python subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show python print-stack\n" 2019.09.10 13:06:47 <- "The mode of Python stack printing on error is \"message\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set range-stepping\n" 2019.09.10 13:06:47 <- "Enable or disable range stepping.\n" "If on, and the target supports it, when stepping a source line, GDB\n" "tells the target to step the corresponding range of addresses itself instead\n" "of issuing multiple single-steps. This speeds up source level\n" "stepping. If off, GDB always issues single-steps, even if range\n" "stepping is supported by the target. The default is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record\n" 2019.09.10 13:06:47 <- "record btrace bts buffer-size: The record/replay bts buffer size is 65536.\n" "record btrace pt buffer-size: The record/replay pt buffer size is 16384.\n" "record btrace replay-memory-access: Replay memory access is read-only.\n" "record full insn-number-max: Record/replay buffer limit is 200000.\n" "record full memory-query: Whether query if PREC cannot record memory change of next instruction is off.\n" "record full stop-at-limit: Whether record/replay stops when record/replay buffer becomes full is on.\n" "function-call-history-size: Number of functions to print in \"record function-call-history\" is 10.\n" "insn-number-max: instruction-history-size: Number of instructions to print in \"record instruction-history\" is 10.\n" 2019.09.10 13:06:47 <- "memory-query: stop-at-limit: (gdb) " 2019.09.10 13:06:47 -> "help set record\n" 2019.09.10 13:06:47 <- "Set record options\n" "\n" "List of set record subcommands:\n" "\n" "set record btrace -- Set record options\n" "set record full -- Set record options\n" "set record function-call-history-size -- Set number of function to print in \"record function-call-history\"\n" "set record instruction-history-size -- Set number of instructions to print in \"record instruction-history\"\n" "\n" "Type \"help set record\" followed by set record subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record btrace\n" 2019.09.10 13:06:47 <- "record btrace bts buffer-size: The record/replay bts buffer size is 65536.\n" "record btrace pt buffer-size: The record/replay pt buffer size is 16384.\n" "replay-memory-access: Replay memory access is read-only.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set record btrace\n" 2019.09.10 13:06:47 <- "Set record options\n" "\n" "List of set record btrace subcommands:\n" "\n" "set record btrace bts -- Set record btrace bts options\n" "set record btrace pt -- Set record btrace pt options\n" "set record btrace replay-memory-access -- Set what memory accesses are allowed during replay\n" "\n" "Type \"help set record btrace\" followed by set record btrace subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record btrace bts\n" 2019.09.10 13:06:47 <- "buffer-size: The record/replay bts buffer size is 65536.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record btrace pt\n" 2019.09.10 13:06:47 <- "buffer-size: The record/replay pt buffer size is 16384.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record btrace replay-memory-access\n" 2019.09.10 13:06:47 <- "Replay memory access is read-only.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record full\n" 2019.09.10 13:06:47 <- "insn-number-max: Record/replay buffer limit is 200000.\n" "memory-query: Whether query if PREC cannot record memory change of next instruction is off.\n" "stop-at-limit: Whether record/replay stops when record/replay buffer becomes full is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set record full\n" 2019.09.10 13:06:47 <- "Set record options\n" "\n" "List of set record full subcommands:\n" "\n" "set record full insn-number-max -- Set record/replay buffer limit\n" "set record full memory-query -- Set whether query if PREC cannot record memory change of next instruction\n" "set record full stop-at-limit -- Set whether record/replay stops when record/replay buffer becomes full\n" "\n" "Type \"help set record full\" followed by set record full subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record full insn-number-max\n" 2019.09.10 13:06:47 <- "Record/replay buffer limit is 200000.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record full memory-query\n" 2019.09.10 13:06:47 <- "Whether query if PREC cannot record memory change of next instruction is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record full stop-at-limit\n" 2019.09.10 13:06:47 <- "Whether record/replay stops when record/replay buffer becomes full is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record function-call-history-size\n" 2019.09.10 13:06:47 <- "Number of functions to print in \"record function-call-history\" is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show record instruction-history-size\n" 2019.09.10 13:06:47 <- "Number of instructions to print in \"record instruction-history\" is 10.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set remote\n" 2019.09.10 13:06:47 <- "Remote protocol specific variables\n" "Configure various remote-protocol specific variables such as\n" "the packets being used\n" "\n" "List of set remote subcommands:\n" "\n" "set remote P-packet -- Set use of remote protocol `P\' (set-register) packet\n" "set remote TracepointSource-packet -- Set use of remote protocol `TracepointSource\' (TracepointSource) packet\n" "set remote X-packet -- Set use of remote protocol `X\' (binary-download) packet\n" "set remote Z-packet -- Set use of remote protocol `Z\' packets\n" "set remote access-watchpoint-packet -- Set use of remote protocol `Z4\' (access-watchpoint) packet\n" "set remote agent-packet -- Set use of remote protocol `QAgent\' (agent) packet\n" "set remote allow-packet -- Set use of remote protocol `QAllow\' (allow) packet\n" "set remote attach-packet -- Set use of remote protocol `vAttach\' (attach) packet\n" "set remote binary-download-packet -- Set use of remote protocol `X\' (binary-download) packet\n" "set remote breakpoint-commands-packet -- Set use of remote protocol `BreakpointCommands\' (breakpoint-commands) packet\n" "set remote btrace-conf-bts-size-packet -- Set use of remote protocol `Qbtrace-conf:bts:size\' (btrace-conf-bts-size) packet\n" "set remote btrace-conf-pt-size-packet -- Set use of remote protocol `Qbtrace-conf:pt:size\' (btrace-conf-pt-size) packet\n" "set remote catch-syscalls-packet -- Set use of remote protocol `QCatchSyscalls\' (catch-syscalls) packet\n" "set remote conditional-breakpoints-packet -- Set use of remote protocol `ConditionalBreakpoints\' (conditional-breakpoints) packet\n" "set remote conditional-tracepoints-packet -- Set use of remote protocol `ConditionalTracepoints\' (conditional-tracepoints) packet\n" "set remote ctrl-c-packet -- Set use of remote protocol `vCtrlC\' (ctrl-c) packet\n" "set remote disable-btrace-packet -- Set use of remote protocol `Qbtrace:off\' (disable-btrace) packet\n" "set remote disable-randomization-packet -- Set use of remote protocol `QDisableRandomization\' (disable-randomization) packet\n" "set remote enable-btrace-bts-packet -- Set use of remote protocol `Qbtrace:bts\' (enable-btrace-bts) packet\n" "set remote enable-btrace-pt-packet -- Set use of remote protocol `Qbtrace:pt\' (enable-btrace-pt) packet\n" "set remote exec-event-feature-packet -- Set use of remote protocol `exec-event-feature\' (exec-event-feature) packet\n" "set remote exec-file -- Set the remote pathname for \"run\"\n" "set remote fast-tracepoints-packet -- Set use of remote protocol `FastTracepoints\' (fast-tracepoints) packet\n" "set remote fetch-register-packet -- Set use of remote protocol `p\' (fetch-register) packet\n" "set remote fork-event-feature-packet -- Set use of remote protocol `fork-event-feature\' (fork-event-feature) packet\n" "set remote get-thread-information-block-address-packet -- Set use of remote protocol `qGetTIBAddr\' (get-thread-information-block-address) packet\n" "set remote get-thread-local-storage-address-packet -- Set use of remote protocol `qGetTLSAddr\' (get-thread-local-storage-address) packet\n" "set remote hardware-breakpoint-limit -- Set the maximum number of target hardware breakpoints\n" "set remote hardware-breakpoint-packet -- Set use of remote protocol `Z1\' (hardware-breakpoint) packet\n" "set remote hardware-watchpoint-length-limit -- Set the maximum length (in bytes) of a target hardware watchpoint\n" "set remote hardware-watchpoint-limit -- Set the maximum number of target hardware watchpoints\n" "set remote hostio-close-packet -- Set use of remote protocol `vFile:close\' (hostio-close) packet\n" "set remote hostio-fstat-packet -- Set use of remote protocol `vFile:fstat\' (hostio-fstat) packet\n" "set remote hostio-open-packet -- Set use of remote protocol `vFile:open\' (hostio-open) packet\n" "set remote hostio-pread-packet -- Set use of remote protocol `vFile:pread\' (hostio-pread) packet\n" "set remote hostio-pwrite-packet -- Set use of remote protocol `vFile:pwrite\' (hostio-pwrite) packet\n" "set remote hostio-readlink-packet -- Set use of remote protocol `vFile:readlink\' (hostio-readlink) packet\n" "set remote hostio-setfs-packet -- Set use of remote protocol `vFile:setfs\' (hostio-setfs) packet\n" "set remote hostio-unlink-packet -- Set use of remote protocol `vFile:unlink\' (hostio-unlink) packet\n" 2019.09.10 13:06:47 <- "set remote hwbreak-feature-packet -- Set use of remote protocol `hwbreak-feature\' (hwbreak-feature) packet\n" "set remote install-in-trace-packet -- Set use of remote protocol `InstallInTrace\' (install-in-trace) packet\n" "set remote interrupt-on-connect -- Set whether interrupt-sequence is sent to remote target when gdb connects to\n" "set remote interrupt-sequence -- Set interrupt sequence to remote target\n" "set remote kill-packet -- Set use of remote protocol `vKill\' (kill) packet\n" "set remote library-info-packet -- Set use of remote protocol `qXfer:libraries:read\' (library-info) packet\n" "set remote library-info-svr4-packet -- Set use of remote protocol `qXfer:libraries-svr4:read\' (library-info-svr4) packet\n" "set remote memory-map-packet -- Set use of remote protocol `qXfer:memory-map:read\' (memory-map) packet\n" "set remote memory-read-packet-size -- Set the maximum number of bytes per memory-read packet\n" "set remote memory-write-packet-size -- Set the maximum number of bytes per memory-write packet\n" "set remote multiprocess-feature-packet -- Set use of remote protocol `multiprocess-feature\' (multiprocess-feature) packet\n" "set remote no-resumed-stop-reply-packet -- Set use of remote protocol `N stop reply\' (no-resumed-stop-reply) packet\n" "set remote noack-packet -- Set use of remote protocol `QStartNoAckMode\' (noack) packet\n" "set remote osdata-packet -- Set use of remote protocol `qXfer:osdata:read\' (osdata) packet\n" "set remote p-packet -- Set use of remote protocol `p\' (fetch-register) packet\n" "set remote pass-signals-packet -- Set use of remote protocol `QPassSignals\' (pass-signals) packet\n" "set remote pid-to-exec-file-packet -- Set use of remote protocol `qXfer:exec-file:read\' (pid-to-exec-file) packet\n" "set remote program-signals-packet -- Set use of remote protocol `QProgramSignals\' (program-signals) packet\n" "set remote query-attached-packet -- Set use of remote protocol `qAttached\' (query-attached) packet\n" "set remote read-aux-vector-packet -- Set use of remote protocol `qXfer:auxv:read\' (read-aux-vector) packet\n" "set remote read-btrace-conf-packet -- Set use of remote protocol `qXfer:btrace-conf\' (read-btrace-conf) packet\n" "set remote read-btrace-packet -- Set use of remote protocol `qXfer:btrace\' (read-btrace) packet\n" "set remote read-fdpic-loadmap-packet -- Set use of remote protocol `qXfer:fdpic:read\' (read-fdpic-loadmap) packet\n" "set remote read-sdata-object-packet -- Set use of remote protocol `qXfer:statictrace:read\' (read-sdata-object) packet\n" "set remote read-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:read\' (read-siginfo-object) packet\n" "set remote read-spu-object-packet -- Set use of remote protocol `qXfer:spu:read\' (read-spu-object) packet\n" "set remote read-watchpoint-packet -- Set use of remote protocol `Z3\' (read-watchpoint) packet\n" "set remote reverse-continue-packet -- Set use of remote protocol `bc\' (reverse-continue) packet\n" "set remote reverse-step-packet -- Set use of remote protocol `bs\' (reverse-step) packet\n" "set remote run-packet -- Set use of remote protocol `vRun\' (run) packet\n" "set remote search-memory-packet -- Set use of remote protocol `qSearch:memory\' (search-memory) packet\n" "set remote set-register-packet -- Set use of remote protocol `P\' (set-register) packet\n" "set remote software-breakpoint-packet -- Set use of remote protocol `Z0\' (software-breakpoint) packet\n" "set remote static-tracepoints-packet -- Set use of remote protocol `StaticTracepoints\' (static-tracepoints) packet\n" "set remote supported-packets-packet -- Set use of remote protocol `qSupported\' (supported-packets) packet\n" "set remote swbreak-feature-packet -- Set use of remote protocol `swbreak-feature\' (swbreak-feature) packet\n" "set remote symbol-lookup-packet -- Set use of remote protocol `qSymbol\' (symbol-lookup) packet\n" "set remote system-call-allowed -- Set if the host system(3) call is allowed for the target\n" "set remote target-features-packet -- Set use of remote protocol `qXfer:features:read\' (target-features) packet\n" "set remote thread-events-packet -- Set use of remote protocol `QThreadEvents\' (thread-events) packet\n" "set remote threads-packet -- Set use of remote protoco" 2019.09.10 13:06:47 <- "l `qXfer:threads:read\' (threads) packet\n" "set remote trace-buffer-size-packet -- Set use of remote protocol `QTBuffer:size\' (trace-buffer-size) packet\n" "set remote trace-status-packet -- Set use of remote protocol `qTStatus\' (trace-status) packet\n" "set remote traceframe-info-packet -- Set use of remote protocol `qXfer:traceframe-info:read\' (traceframe-info) packet\n" "set remote unwind-info-block-packet -- Set use of remote protocol `qXfer:uib:read\' (unwind-info-block) packet\n" "set remote verbose-resume-packet -- Set use of remote protocol `vCont\' (verbose-resume) packet\n" "set remote verbose-resume-supported-packet -- Set use of remote protocol `vContSupported\' (verbose-resume-supported) packet\n" "set remote vfork-event-feature-packet -- Set use of remote protocol `vfork-event-feature\' (vfork-event-feature) packet\n" "set remote write-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:write\' (write-siginfo-object) packet\n" "set remote write-spu-object-packet -- Set use of remote protocol `qXfer:spu:write\' (write-spu-object) packet\n" "set remote write-watchpoint-packet -- Set use of remote protocol `Z2\' (write-watchpoint) packet\n" "\n" "Type \"help set remote\" followed by set remote subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" "(gdb) " 2019.09.10 13:06:47 -> "show remote P-packet\n" 2019.09.10 13:06:47 <- "Support for the `P\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote TracepointSource-packet\n" 2019.09.10 13:06:47 <- "Support for the `TracepointSource\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote X-packet\n" 2019.09.10 13:06:47 <- "Support for the `X\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote Z-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z0\' packet is auto-detected, currently unknown.\n" "Support for the `Z1\' packet is auto-detected, currently unknown.\n" "Support for the `Z2\' packet is auto-detected, currently unknown.\n" "Support for the `Z3\' packet is auto-detected, currently unknown.\n" "Support for the `Z4\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set remote Z-packet\n" 2019.09.10 13:06:47 <- "Set use of remote protocol `Z\' packets\n" "When set, GDB will attempt to use the remote breakpoint and watchpoint\n" "packets.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote access-watchpoint-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z4\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote agent-packet\n" 2019.09.10 13:06:47 <- "Support for the `QAgent\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote allow-packet\n" 2019.09.10 13:06:47 <- "Support for the `QAllow\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote attach-packet\n" 2019.09.10 13:06:47 <- "Support for the `vAttach\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote binary-download-packet\n" 2019.09.10 13:06:47 <- "Support for the `X\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote breakpoint-commands-packet\n" 2019.09.10 13:06:47 <- "Support for the `BreakpointCommands\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote btrace-conf-bts-size-packet\n" 2019.09.10 13:06:47 <- "Support for the `Qbtrace-conf:bts:size\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote btrace-conf-pt-size-packet\n" 2019.09.10 13:06:47 <- "Support for the `Qbtrace-conf:pt:size\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote catch-syscalls-packet\n" 2019.09.10 13:06:47 <- "Support for the `QCatchSyscalls\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote conditional-breakpoints-packet\n" 2019.09.10 13:06:47 <- "Support for the `ConditionalBreakpoints\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote conditional-tracepoints-packet\n" 2019.09.10 13:06:47 <- "Support for the `ConditionalTracepoints\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote ctrl-c-packet\n" 2019.09.10 13:06:47 <- "Support for the `vCtrlC\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote disable-btrace-packet\n" 2019.09.10 13:06:47 <- "Support for the `Qbtrace:off\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote disable-randomization-packet\n" 2019.09.10 13:06:47 <- "Support for the `QDisableRandomization\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote enable-btrace-bts-packet\n" 2019.09.10 13:06:47 <- "Support for the `Qbtrace:bts\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote enable-btrace-pt-packet\n" 2019.09.10 13:06:47 <- "Support for the `Qbtrace:pt\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote exec-event-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `exec-event-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote exec-file\n" 2019.09.10 13:06:47 <- "(null)\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote fast-tracepoints-packet\n" 2019.09.10 13:06:47 <- "Support for the `FastTracepoints\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote fetch-register-packet\n" 2019.09.10 13:06:47 <- "Support for the `p\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote fork-event-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `fork-event-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote get-thread-information-block-address-packet\n" 2019.09.10 13:06:47 <- "Support for the `qGetTIBAddr\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote get-thread-local-storage-address-packet\n" 2019.09.10 13:06:47 <- "Support for the `qGetTLSAddr\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hardware-breakpoint-limit\n" 2019.09.10 13:06:47 <- "The maximum number of target hardware breakpoints is -1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hardware-breakpoint-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z1\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hardware-watchpoint-length-limit\n" 2019.09.10 13:06:47 <- "The maximum length (in bytes) of a target hardware watchpoint is -1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hardware-watchpoint-limit\n" 2019.09.10 13:06:47 <- "The maximum number of target hardware watchpoints is -1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-close-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:close\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-fstat-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:fstat\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-open-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:open\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-pread-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:pread\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-pwrite-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:pwrite\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-readlink-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:readlink\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-setfs-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:setfs\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hostio-unlink-packet\n" 2019.09.10 13:06:47 <- "Support for the `vFile:unlink\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote hwbreak-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `hwbreak-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote install-in-trace-packet\n" 2019.09.10 13:06:47 <- "Support for the `InstallInTrace\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote interrupt-on-connect\n" 2019.09.10 13:06:47 <- "W whether interrupt-sequence is sent to remote target when gdb connects to is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote interrupt-sequence\n" 2019.09.10 13:06:47 <- "Send the ASCII ETX character (Ctrl-c) to the remote target to interrupt the execution of the program.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote kill-packet\n" 2019.09.10 13:06:47 <- "Support for the `vKill\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote library-info-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:libraries:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote library-info-svr4-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:libraries-svr4:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote memory-map-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:memory-map:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote memory-read-packet-size\n" 2019.09.10 13:06:47 <- "The memory-read-packet-size is 0. Packets are limited to 656 bytes.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote memory-write-packet-size\n" 2019.09.10 13:06:47 <- "The memory-write-packet-size is 0. Packets are limited to 656 bytes.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote multiprocess-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `multiprocess-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote no-resumed-stop-reply-packet\n" 2019.09.10 13:06:47 <- "Support for the `N stop reply\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote noack-packet\n" 2019.09.10 13:06:47 <- "Support for the `QStartNoAckMode\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote osdata-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:osdata:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote p-packet\n" 2019.09.10 13:06:47 <- "Support for the `p\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote pass-signals-packet\n" 2019.09.10 13:06:47 <- "Support for the `QPassSignals\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote pid-to-exec-file-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:exec-file:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote program-signals-packet\n" 2019.09.10 13:06:47 <- "Support for the `QProgramSignals\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote query-attached-packet\n" 2019.09.10 13:06:47 <- "Support for the `qAttached\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-aux-vector-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:auxv:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-btrace-conf-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:btrace-conf\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-btrace-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:btrace\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-fdpic-loadmap-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:fdpic:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-sdata-object-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:statictrace:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-siginfo-object-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:siginfo:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-spu-object-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:spu:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote read-watchpoint-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z3\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote reverse-continue-packet\n" 2019.09.10 13:06:47 <- "Support for the `bc\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote reverse-step-packet\n" 2019.09.10 13:06:47 <- "Support for the `bs\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote run-packet\n" 2019.09.10 13:06:47 <- "Support for the `vRun\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote search-memory-packet\n" 2019.09.10 13:06:47 <- "Support for the `qSearch:memory\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote set-register-packet\n" 2019.09.10 13:06:47 <- "Support for the `P\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote software-breakpoint-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z0\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote static-tracepoints-packet\n" 2019.09.10 13:06:47 <- "Support for the `StaticTracepoints\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote supported-packets-packet\n" 2019.09.10 13:06:47 <- "Support for the `qSupported\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote swbreak-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `swbreak-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote symbol-lookup-packet\n" 2019.09.10 13:06:47 <- "Support for the `qSymbol\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote system-call-allowed\n" 2019.09.10 13:06:47 <- "Calling host system(3) call from target is not allowed\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote target-features-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:features:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote thread-events-packet\n" 2019.09.10 13:06:47 <- "Support for the `QThreadEvents\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote threads-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:threads:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote trace-buffer-size-packet\n" 2019.09.10 13:06:47 <- "Support for the `QTBuffer:size\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote trace-status-packet\n" 2019.09.10 13:06:47 <- "Support for the `qTStatus\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote traceframe-info-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:traceframe-info:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote unwind-info-block-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:uib:read\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote verbose-resume-packet\n" 2019.09.10 13:06:47 <- "Support for the `vCont\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote verbose-resume-supported-packet\n" 2019.09.10 13:06:47 <- "Support for the `vContSupported\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote vfork-event-feature-packet\n" 2019.09.10 13:06:47 <- "Support for the `vfork-event-feature\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote write-siginfo-object-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:siginfo:write\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote write-spu-object-packet\n" 2019.09.10 13:06:47 <- "Support for the `qXfer:spu:write\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remote write-watchpoint-packet\n" 2019.09.10 13:06:47 <- "Support for the `Z2\' packet is auto-detected, currently unknown.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remoteaddresssize\n" 2019.09.10 13:06:47 <- "The maximum size of the address (in bits) in a memory packet is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remotecache\n" 2019.09.10 13:06:47 <- "Deprecated remotecache flag is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remoteflow\n" 2019.09.10 13:06:47 <- "Hardware flow control is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remotelogbase\n" 2019.09.10 13:06:47 <- "Numerical base for remote session logging is \"ascii\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remotelogfile\n" 2019.09.10 13:06:47 <- "Filename for remote session recording is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show remotetimeout\n" 2019.09.10 13:06:47 <- "Timeout limit to wait for target to respond is 2.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show schedule-multiple\n" 2019.09.10 13:06:47 <- "Resuming the execution of threads of all processes is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show scheduler-locking\n" 2019.09.10 13:06:47 <- "Mode for locking scheduler during execution is \"replay\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show script-extension\n" 2019.09.10 13:06:47 <- "Script filename extension recognition is \"soft\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show serial\n" 2019.09.10 13:06:47 <- "baud: Baud rate for remote serial I/O is -1.\n" "parity: Parity for remote serial I/O is \"none\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set serial\n" 2019.09.10 13:06:47 <- "Set default serial/parallel port configuration.\n" "\n" "List of set serial subcommands:\n" "\n" "set serial baud -- Set baud rate for remote serial I/O\n" "set serial parity -- Set parity for remote serial I/O\n" "\n" "Type \"help set serial\" followed by set serial subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show serial baud\n" 2019.09.10 13:06:47 <- "Baud rate for remote serial I/O is -1.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show serial parity\n" 2019.09.10 13:06:47 <- "Parity for remote serial I/O is \"none\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show solib-absolute-prefix\n" 2019.09.10 13:06:47 <- "The current system root is \"target:\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show solib-search-path\n" 2019.09.10 13:06:47 <- "The search path for loading non-absolute shared library symbol files is .\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show stack-cache\n" 2019.09.10 13:06:47 <- "Cache use for stack accesses is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show startup-with-shell\n" 2019.09.10 13:06:47 <- "Use of shell to start subprocesses is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show step-mode\n" 2019.09.10 13:06:47 <- "Mode of the step operation is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show stop-on-solib-events\n" 2019.09.10 13:06:47 <- "Stopping for shared library events is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show struct-convention\n" 2019.09.10 13:06:47 <- "The convention for returning small structs is \"default\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set substitute-path\n" 2019.09.10 13:06:47 <- "Usage: set substitute-path FROM TO\n" "Add a substitution rule replacing FROM into TO in source file names.\n" "If a substitution rule was previously set for FROM, the old rule\n" "is replaced by the new one.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show sysroot\n" 2019.09.10 13:06:47 <- "The current system root is \"target:\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show target-charset\n" 2019.09.10 13:06:47 <- "The target character set is \"auto; currently UTF-8\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show target-file-system-kind\n" 2019.09.10 13:06:47 <- "The assumed file system kind for target reported file names is \"auto\" (currently \"unix\").\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show target-wide-charset\n" 2019.09.10 13:06:47 <- "The target wide character set is \"auto; currently UTF-32\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set tcp\n" 2019.09.10 13:06:47 <- "TCP protocol specific variables\n" "Configure variables specific to remote TCP connections\n" "\n" "List of set tcp subcommands:\n" "\n" "set tcp auto-retry -- Set auto-retry on socket connect\n" "set tcp connect-timeout -- Set timeout limit in seconds for socket connection\n" "\n" "Type \"help set tcp\" followed by set tcp subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tcp auto-retry\n" 2019.09.10 13:06:47 <- "Auto-retry on socket connect is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tcp connect-timeout\n" 2019.09.10 13:06:47 <- "Timeout limit in seconds for socket connection is 15.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tdesc\n" 2019.09.10 13:06:47 <- "filename: The target description will be read from the target.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trace-buffer-size\n" 2019.09.10 13:06:47 <- "Requested size of trace buffer is unlimited.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trace-commands\n" 2019.09.10 13:06:47 <- "State of GDB CLI command tracing is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trace-notes\n" 2019.09.10 13:06:47 <- "The notes string to use for current and future trace runs is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trace-stop-notes\n" 2019.09.10 13:06:47 <- "The notes string to use for future tstop commands is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trace-user\n" 2019.09.10 13:06:47 <- "The user name to use for current and future trace runs is \"\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show trust-readonly-sections\n" 2019.09.10 13:06:47 <- "Mode for reading from readonly sections is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set tui\n" 2019.09.10 13:06:47 <- "TUI configuration variables\n" "\n" "List of set tui subcommands:\n" "\n" "set tui active-border-mode -- Set the attribute mode to use for the active TUI window border\n" "set tui border-kind -- Set the kind of border for TUI windows\n" "set tui border-mode -- Set the attribute mode to use for the TUI window borders\n" "\n" "Type \"help set tui\" followed by set tui subcommand name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tui active-border-mode\n" 2019.09.10 13:06:47 <- "The attribute mode to use for the active TUI window border is \"bold-standout\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tui border-kind\n" 2019.09.10 13:06:47 <- "The kind of border for TUI windows is \"acs\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show tui border-mode\n" 2019.09.10 13:06:47 <- "The attribute mode to use for the TUI window borders is \"normal\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show unwind-on-terminating-exception\n" 2019.09.10 13:06:47 <- "Unwind stack if a C++ exception is unhandled while in a call dummy is on.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show unwindonsignal\n" 2019.09.10 13:06:47 <- "Unwinding of stack if a signal is received while in a call dummy is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show use-coredump-filter\n" 2019.09.10 13:06:47 <- "Use of /proc/PID/coredump_filter file to generate corefiles is on.\n" "(gdb) " 2019.09.10 13:06:47 -> "help set variable\n" 2019.09.10 13:06:47 <- "Evaluate expression EXP and assign result to variable VAR, using assignment\n" "syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n" "example). VAR may be a debugger \"convenience\" variable (names starting\n" "with $), a register (a few standard names starting with $), or an actual\n" "variable in the program being debugged. EXP is any valid expression.\n" "This may usually be abbreviated to simply \"set\".\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show verbose\n" 2019.09.10 13:06:47 <- "Verbosity is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show watchdog\n" 2019.09.10 13:06:47 <- "Watchdog timer is 0.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show width\n" 2019.09.10 13:06:47 <- "Number of characters gdb thinks are in a line is unlimited.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show write\n" 2019.09.10 13:06:47 <- "Writing into executable and core files is off.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set architecture\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are i386, i386:x86-64, i386:x64-32, i8086, i386:intel, i386:x86-64:intel, i386:x64-32:intel, i386:nacl, i386:x86-64:nacl, i386:x64-32:nacl, auto.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set endian\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are big, little, auto.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set demangle-style\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are none, auto, gnu, lucid, arm, hp, edg, gnu-v3, java, gnat, dlang, rust.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set language\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are ada, c, c++, asm, minimal, d, fortran, go, auto, local, unknown, modula-2, objective-c, opencl, pascal, rust.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set disassembly-flavor\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are att, intel.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set follow-fork-mode\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are child, parent.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "set scheduler-locking\n" 2019.09.10 13:06:47 <- "Requires an argument. Valid arguments are off, on, step, replay.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set check range\n" 2019.09.10 13:06:47 <- "Set range checking. (on/warn/off/auto)\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help set check type\n" 2019.09.10 13:06:47 <- "Set strict type checking.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help dir\n" 2019.09.10 13:06:47 <- "Add directory DIR to beginning of search path for source files.\n" "Forget cached info on source file locations and line positions.\n" "DIR can also be $cwd for the current working directory, or $cdir for the\n" "directory in which the source file was compiled into object code.\n" "With no argument, reset the search path to $cdir:$cwd, the default.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show dir\n" 2019.09.10 13:06:47 <- "Source directories searched: $cdir:$cwd\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "help path\n" 2019.09.10 13:06:47 <- "Add directory DIR(s) to beginning of search path for object files.\n" "$cwd in the path means the current working directory.\n" "This path is equivalent to the $PATH shell variable. It is a list of\n" "directories, separated by colons. These directories are searched to find\n" "fully linked executable files and separately compiled object files as needed.\n" 2019.09.10 13:06:47 <- "(gdb) " 2019.09.10 13:06:47 -> "show path\n" 2019.09.10 13:06:47 <- "Executable and object file path: /star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/bin:/star/starmirror/jdk/linux-x86_64/jdk11.0.3/jre/bin:/star/starmirror/git/latest/linux-x86_64/bin:/star/starmirror/ninja/1.6.0/linux-x86_64/bin:/opt/Siemens/Teamcenter10.1/AppShare/bin:/star/starmirror/compilers/linux-x86_64-2.10.1/gnu7.1.0/bin:/u/xeonwi01/people/timt/bin:/opt/Trelis-16.3/bin:/star/starmirror/mts/latest/bin:/star/12.06/12.06.010/STAR-CCM+12.06.010/star/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/u/xeonwi01/people/timt/.local/bin:/u/xeonwi01/people/timt/bin\n" 2019.09.10 13:06:47 <- "(gdb) " # Retrieving GDB Settings...done. # Retrieving Command Definitions... 2019.09.10 13:06:47 -> "help user-defined\n" 2019.09.10 13:06:47 <- "User-defined commands.\n" "The commands in this class are those defined by the user.\n" "Use the \"define\" command to define a command.\n" "\n" "List of commands:\n" "\n" "\n" "Type \"help\" followed by command name for full documentation.\n" "Type \"apropos word\" to search for commands related to \"word\".\n" "Command name abbreviations are allowed if unambiguous.\n" "(gdb) " # Retrieving Command Definitions...done. # Retrieving GDB Settings...done. 2019.09.10 13:06:54 -> "set print static-members off\n" 2019.09.10 13:06:54 <- "(gdb) " 2019.09.10 13:06:54 -> "display\n" 2019.09.10 13:06:54 <- "(gdb) " 2019.09.10 13:06:54 -> "show print static-members\n" 2019.09.10 13:06:54 <- "Printing of C++ static members is off.\n" "(gdb) " # Printing of C++ static members is off. 2019.09.10 13:07:00 -> "quit\n" # Running GDB (pid 4734, tty /dev/pts/4)...Exit 0. # Saving options in "/u/xeonwi01/people/timt/.ddd/init"... # Saving options in "/u/xeonwi01/people/timt/.ddd/init"...done. # Deleting session "10a2b730f45d2f0456156813879368102900000223500108"... # Current session is [none]. # Deleting session "10a2b730f45d2f0456156813879368102900000223500108"...done. # Saving history in "/u/xeonwi01/people/timt/.ddd/history"... # Saving history in "/u/xeonwi01/people/timt/.ddd/history"...done. # Thanks for using DDD 3.3.12!