[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Why my SHELL(ash) does not work on 386SX ,mayday...mayday...!

From: 罗智
Subject: Why my SHELL(ash) does not work on 386SX ,mayday...mayday...!
Date: Sun, 30 Apr 2006 09:59:58 +0800

Why my SHELL(ash) does not work on 386SX ,mayday...mayday...!

My system is made with linux kernel 2.4.20 + busybox1.1.0 + RootFileSystem 
which is manually 
created. it's ok on several PC .
When I move this system to my embedded computer (CPU:ALI 6117,includes 386SX ) 
, problems 
The kernel works ok on the embedded system , I think ,during the booting .the 
/etc/init.d/rcS is 
ok ,too. the embedded system stop when shell should get out and show shell 

I have tried three /etc/inittab :
1:tty1::respawn:/sbin/getty 38400 tty1
   Embedded system show "login:",but when I insert username and press enter 
,"login:" come out 
again. no shell prompt show out.
   Everything is ok when booting , system go into " Please press Enter to 
activate this console".
but this statement show again when I press enter. system still can't go into 
   the phenomena is nothing . booting is ok , but nothing show out at last . 
system idles there,
Can not go into shell!

In a word , shell can't work correctly, I hope experts can give me some advice. 

thank you very much



reply via email to

[Prev in Thread] Current Thread [Next in Thread]