Re: how to compile commoncpp2-1.0.13 for win32?

[Wolfgang]

Hello Adib,

again i moved a bit further - thx for your support. 
for libxml2 i downloaded the following precompiled win32 bin's:
iconv-1.9.1.win32.zip  
libxml2-2.6.3.win32.zip
and placed them in my /usr/i586-mingw32msvc dir:
lib/ 
include/ 
dll/
on my linux machine. (respectivly include/libxml).

i had also copied over CCXX2.rc to one dir.
so far i could compile, but still not create the dll's. pls find attached a 
truncated log. 

see in particular:
"i586-mingw32msvc-dllwrap: no export definition file provided.
Creating one, but that may not be what you want"

Again any advise is very much appreciated.

Regards

Wolfgang



=======snip mingw32 compile on linux========
address@hidden:~/common-c++/commoncpp2-1.0.13/win32$ make -f Makefile.tst
...
...
...
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/xml.o ../src/xml.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/persist.o ../src/persist.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/engine.o ../src/engine.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/digest.o ../src/digest.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/sha.o ../src/sha.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/date.o ../src/date.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/md5.o ../src/md5.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/unix.o ../src/unix.cpp
i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include 
-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2 
-mthreads -o ../win32/../win32/ftp.o ../src/ftp.cpp
i586-mingw32msvc-dllwrap --export-all --output-def ccext2.def --implib 
libccext2.a --driver-name i586-mingw32msvc-c++ -o ccext2.dll \
buffer.o fifo.o pipe.o numbers.o cmdoptns.o xml.o persist.o engine.o digest.o 
sha.o date.o md5.o unix.o ftp.o libgnu2.o -L. -L/usr/i586-mingw32msvc/dll 
-lccgnu2 -lws2_32 -lwsock32
i586-mingw32msvc-dllwrap: no export definition file provided.
Creating one, but that may not be what you want
xml.o(.text+0x178): In function `ZN3ost9XMLStream5parseEPKc':
/home/wolfgang/common-c++/commoncpp2-1.0.13/win32/../src/xml.cpp:157: 
undefined reference to `xmlCreatePushParserCtxt'
xml.o(.text+0x1bc):/home/wolfgang/common-c++/commoncpp2-1.0.13/win32/../src/
xml.cpp:164: undefined reference to `xmlParseChunk'
xml.o(.text+0x1da):/home/wolfgang/common-c++/commoncpp2-1.0.13/win32/../src/
xml.cpp:165: undefined reference to `xmlParseChunk'
xml.o(.text+0x1f6):/home/wolfgang/common-c++/commoncpp2-1.0.13/win32/../src/
xml.cpp:171: undefined reference to `xmlFreeParserCtxt'
i586-mingw32msvc-dllwrap: i586-mingw32msvc-c++ exited with status 1
make: *** [ccext2.dll] Fehler 1
address@hidden:~/common-c++/commoncpp2-1.0.13/win32$

=======snap mingw32 compile on linux========



Am Sonntag, 21. Dezember 2003 20:58 schrieb address@hidden:
> Wolgang,
>
> sorry, forgot to tell you that I made an other change
> undefine the HAVE_OLD_IOSTREAM in win32/c++/config.h
>
> //#define     HAVE_OLD_IOSTREAM
>
> I swear that was the last change until success ;-) (hope you have libxml
> in place?)
>
> Adib.
>
> Wolfgang wrote:
> > Hello Adib,
> >
> > i added   #include <stdio.h>  to win32/config.h and got a bit further.
> > (see attached log). however there are still some probs left.
> >
> > again, any hints and ideas are welcome ;-)
> >
> > thx
> >
> > Wolfgang
> >
> >
> > =======snip crosscompile on debian with modified config.h =========
> >
> > address@hidden:~/common-c++/commoncpp2-1.0.13/win32$ make -f Makefile.tst
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/thread.o ../src/thread.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/mutex.o ../src/mutex.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/semaphore.o ../src/semaphore.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/threadkey.o ../src/threadkey.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/friends.o ../src/friends.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/event.o ../src/event.cpp
> > i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> > -DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> > -mthreads -o ../win32/../win32/slog.o ../src/slog.cpp
> > ../src/slog.cpp: In constructor `ost::Slog::Slog()':
> > ../src/slog.cpp:70: error: no matching function for call to `
> >    std::basic_ostream<char, std::char_traits<char> >::basic_ostream(const
> >    <anonymous>**)'
> > /usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/iosfwd:64: error:
> > candidates
> >    are: std::basic_ostream<char, std::char_traits<char>
> > >::basic_ostream(const std::basic_ostream<char, std::char_traits<char>
> > >&)
> > /usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/ostream:106: error:
> >            std::basic_ostream<_CharT,
> >    _Traits>::basic_ostream(std::basic_streambuf<_CharT, _Traits>*) [with
> > _CharT
> >    = char, _Traits = std::char_traits<char>]
> > make: *** [../win32/slog.o] Fehler 1
> > address@hidden:~/common-c++/common
> >
> > =======snap crosscompile on debian with modified config.h =========
> >
> > Am Sonntag, 21. Dezember 2003 18:50 schrieb address@hidden:
> >>Hi Wolfgang,
> >>
> >>ah yes ;-) I got the same trouble so I added in \win32\c++\config.h
> >>#include <stdio.h>
> >>directly after the
> >>#ifndef CCXX_CONFIG_H_
> >>#define CCXX_CONFIG_H_
> >>statements.
> >>
> >>HTH,
> >>
> >>Adib.
> >>
> >>Wolfgang wrote:
> >>>Hello,
> >>>
> >>>i still have problems to build commonc++ for the win32 platform.
> >>>
> >>>pls let me appologize in advance, if i did not follow the etiquette of
> >>>this mailinglist by attaching so much compiler output. the reason is
> >>>simply that i hope that someone can fingerpoint to what i am doing
> >>> wrong.
> >>>
> >>>for my last attempt to crosscompile  i used the makefile that Adib
> >>>provided in the recent mail (Thank your for that!) and changed only the
> >>>reference to minggw.
> >>>here the output of my attempt to compile for win32 on my linux box
> >>>(debiin unstable):
> >>>
> >>>=======snip====
> >>>/common-c++/commoncpp2-1.0.13/win32$ make -f Makefile.tst
> >>>i586-mingw32msvc-c++ -c -I. -I../include -I/usr/i586-mingw32msvc/include
> >>>-DHAVE_CONFIG_H -D_GNU_SOURCE -include ../win32/cc++/config.h -g -O2
> >>>-mthreads -o ../win32/../win32/thread.o ../src/thread.cpp
> >>>In file included from
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/
> >>>i586-mingw32msvc/bits/c++io.h:35,
> >>>                 from
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/ bits/fpos.h:44,
> >>>                 from
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/
> >>>bits/char_traits.h:46,
> >>>                 from
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/ string:47,
> >>>                 from ../include/cc++/strchar.h:49,
> >>>                 from ../include/cc++/exception.h:54,
> >>>                 from ../include/cc++/thread.h:58,
> >>>                 from ../src/thread.cpp:43:
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/cstdio:167: error: `
> >>>   snprintf' not declared
> >>>/usr/lib/gcc-lib/i586-mingw32msvc/3.3.1/include/c++/cstdio:177: error: `
> >>>   snprintf' not declared
> >>>make: *** [../win32/thread.o] Fehler 1
> >>>
> >>>=========snap===========
> >>>It seems this is because the redefiinition of snprintf for a mingw32
> >>>compile ,that i saw in one of the header files, did not apply.
> >>>(and therefore some other minggw specific defines will not have applied
> >>>as well).  but why?
> >>>
> >>>so i tried again to compile on a native windows system using the
> >>>following versions of mingw and msys: (fresh install)
> >>>mingw: 3.0.0.rc4 (g++ (GCC) 3.2.3 (mingw special 20030504-1) )
> >>>msys: 1.0.10.rc3
> >>>
> >>>
> >>>i extracted the commonc++ archive in its own directory below the msys
> >>>homedir und ran ./configure
> >>>=======snip configure on win32 using mingw/msys===============
> >>>
> >>>address@hidden ~/commoncpp2-1.0.13
> >>>$ ./configure
> >>>checking build system type... i686-pc-mingw32
> >>>checking host system type... i686-pc-mingw32
> >>>checking target system type... i686-pc-mingw32
> >>>checking for gcc... gcc
> >>>checking for C compiler default output... a.exe
> >>>checking whether the C compiler works... yes
> >>>checking whether we are cross compiling... no
> >>>checking for suffix of executables... .exe
> >>>checking for suffix of object files... o
> >>>checking whether we are using the GNU C compiler... yes
> >>>checking whether gcc accepts -g... yes
> >>>checking for gcc option to accept ANSI C... none needed
> >>>checking for egrep... grep -E
> >>>checking for ANSI C header files... no
> >>>checking for sys/types.h... yes
> >>>checking for sys/stat.h... yes
> >>>checking for stdlib.h... yes
> >>>checking for string.h... yes
> >>>checking for memory.h... yes
> >>>checking for strings.h... yes
> >>>checking for inttypes.h... yes
> >>>checking for stdint.h... yes
> >>>checking for unistd.h... yes
> >>>checking for gcc... (cached) gcc
> >>>checking whether we are using the GNU C compiler... (cached) yes
> >>>checking whether gcc accepts -g... (cached) yes
> >>>checking for gcc option to accept ANSI C... (cached) none needed
> >>>checking how to run the C preprocessor... gcc -E
> >>>checking for strerror in -lcposix... no
> >>>checking minix/config.h usability... no
> >>>checking minix/config.h presence... no
> >>>checking for minix/config.h... no
> >>>checking for MSC environment... no
> >>>checking for a sed that does not truncate output... /bin/sed
> >>>checking for ld used by gcc... D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe
> >>>checking if the linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe) is GNU
> >>>ld... yes
> >>>checking for D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe option to reload
> >>>object files... -r
> >>>checking for BSD-compatible nm... /mingw/bin/nm
> >>>checking whether ln -s works... yes
> >>>checking how to recognise dependent libraries... file_magic ^x86 archive
> >>>import|^x86 DLL
> >>>checking dlfcn.h usability... no
> >>>checking dlfcn.h presence... no
> >>>checking for dlfcn.h... no
> >>>checking for g++... g++
> >>>checking whether we are using the GNU C++ compiler... yes
> >>>checking whether g++ accepts -g... yes
> >>>checking how to run the C++ preprocessor... g++ -E
> >>>checking for g77... g77
> >>>checking whether we are using the GNU Fortran 77 compiler... yes
> >>>checking whether g77 accepts -g... yes
> >>>checking the maximum length of command line arguments... 8192
> >>>checking command to parse /mingw/bin/nm output from gcc object... ok
> >>>checking for objdir... .libs
> >>>checking for ar... ar
> >>>checking for ranlib... ranlib
> >>>checking for strip... strip
> >>>checking if gcc static flag  works... yes
> >>>checking if gcc supports -fno-rtti -fno-exceptions... yes
> >>>checking for gcc option to produce PIC... -DDLL_EXPORT
> >>>checking if gcc PIC flag -DDLL_EXPORT works... yes
> >>>checking if gcc supports -c -o file.o... yes
> >>>checking whether the gcc linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe)
> >>>supports shared libraries... yes
> >>>checking whether -lc should be explicitly linked in... yes
> >>>checking how to hardcode library paths into programs... immediate
> >>>checking whether stripping libraries is possible... yes
> >>>checking dynamic linker characteristics... Win32 ld.exe
> >>>checking if libtool supports shared libraries... yes
> >>>checking whether to build shared libraries... yes
> >>>checking whether to build static libraries... yes
> >>>configure: creating libtool
> >>>appending configuration tag "CXX" to libtool
> >>>checking for ld used by g++... D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe
> >>>checking if the linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe) is GNU
> >>>ld... yes
> >>>checking whether the g++ linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe)
> >>>supports shared libraries... yes
> >>>checking for g++ option to produce PIC... -DDLL_EXPORT
> >>>checking if g++ PIC flag -DDLL_EXPORT works... yes
> >>>checking if g++ supports -c -o file.o... yes
> >>>checking whether the g++ linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe)
> >>>supports shared libraries... yes
> >>>checking how to hardcode library paths into programs... immediate
> >>>checking whether stripping libraries is possible... yes
> >>>checking dynamic linker characteristics... Win32 ld.exe
> >>>appending configuration tag "F77" to libtool
> >>>checking if libtool supports shared libraries... yes
> >>>checking whether to build shared libraries... yes
> >>>checking whether to build static libraries... yes
> >>>checking for g77 option to produce PIC... -DDLL_EXPORT
> >>>checking if g77 PIC flag -DDLL_EXPORT works... yes
> >>>checking if g77 supports -c -o file.o... yes
> >>>checking whether the g77 linker (D:/APPS/DEVEL/MinGW/mingw32/bin/ld.exe)
> >>>supports shared libraries... yes
> >>>checking how to hardcode library paths into programs... immediate
> >>>checking whether stripping libraries is possible... yes
> >>>checking dynamic linker characteristics... Win32 ld.exe
> >>>checking for a BSD-compatible install... /bin/install -c
> >>>checking whether build environment is sane... yes
> >>>checking for gawk... gawk
> >>>checking whether make sets $(MAKE)... yes
> >>>checking for style of include used by make... GNU
> >>>checking dependency style of gcc... gcc3
> >>>checking dependency style of g++... gcc3
> >>>checking for ranlib... (cached) ranlib
> >>>checking for genorated automake files... found
> >>>checking whether to enable maintainer-specific portions of Makefiles...
> >>>no checking for Win32 gnu environment... yes
> >>>checking whether system meets Posix.1... no
> >>>checking for unistd.h... (cached) yes
> >>>checking endian.h usability... no
> >>>checking endian.h presence... no
> >>>checking for endian.h... no
> >>>checking fcntl.h usability... yes
> >>>checking fcntl.h presence... yes
> >>>checking for fcntl.h... yes
> >>>checking sys/fcntl.h usability... yes
> >>>checking sys/fcntl.h presence... yes
> >>>checking for sys/fcntl.h... yes
> >>>checking for sys/types.h... (cached) yes
> >>>checking for sigaction... no
> >>>checking for setitimer... no
> >>>checking for sigwait... no
> >>>checking bsd/signal.h usability... no
> >>>checking bsd/signal.h presence... no
> >>>checking for bsd/signal.h... no
> >>>checking return type of signal handlers... void
> >>>checking whether sigwait has 2 arguments... yes
> >>>checking for strcasecmp... yes
> >>>checking for strdup... yes
> >>>checking for snprintf... yes
> >>>checking for memmove... yes
> >>>checking for strings.h... (cached) yes
> >>>checking for getopt... yes
> >>>checking getopt.h usability... yes
> >>>checking getopt.h presence... yes
> >>>checking for getopt.h... yes
> >>>checking for getopt_long in -lgnugetopt... no
> >>>checking for getopt_long... yes
> >>>checking for dlfcn.h... (cached) no
> >>>checking for shl_load in -ldld... no
> >>>checking for dlopen in -ldl... no
> >>>checking for dlopen in -lc... no
> >>>checking mach-o/dyld.h usability... no
> >>>checking mach-o/dyld.h presence... no
> >>>checking for mach-o/dyld.h... no
> >>>checking whether time.h and sys/time.h may both be included... yes
> >>>checking sys/time.h usability... yes
> >>>checking sys/time.h presence... yes
> >>>checking for sys/time.h... yes
> >>>checking features.h usability... no
> >>>checking features.h presence... no
> >>>checking for features.h... no
> >>>checking pthread.h usability... no
> >>>checking pthread.h presence... no
> >>>checking for pthread.h... no
> >>>checking sys/atomic.h usability... no
> >>>checking sys/atomic.h presence... no
> >>>checking for sys/atomic.h... no
> >>>checking thread.h usability... no
> >>>checking thread.h presence... no
> >>>checking for thread.h... no
> >>>checking for setenv... no
> >>>checking for localtime_r in -lc_r... no
> >>>checking for strtok_r in -lc... no
> >>>checking for localtime_r in -lc... no
> >>>checking sys/socket.h usability... no
> >>>checking sys/socket.h presence... no
> >>>checking for sys/socket.h... no
> >>>checking winsock.h usability... yes
> >>>checking winsock.h presence... yes
> >>>checking for winsock.h... yes
> >>>checking for socket in -lsocket... no
> >>>checking sys/libcsys.h usability... no
> >>>checking sys/libcsys.h presence... no
> >>>checking for sys/libcsys.h... no
> >>>checking for inet_aton in -lc... no
> >>>checking for socklen_t defined... no
> >>>checking poll.h usability... no
> >>>checking poll.h presence... no
> >>>checking for poll.h... no
> >>>checking sys/poll.h usability... no
> >>>checking sys/poll.h presence... no
> >>>checking for sys/poll.h... no
> >>>checking sys/stream.h usability... no
> >>>checking sys/stream.h presence... no
> >>>checking for sys/stream.h... no
> >>>checking for poll... no
> >>>checking zlib.h usability... no
> >>>checking zlib.h presence... no
> >>>checking for zlib.h... no
> >>>checking for xml2-config... no
> >>>checking for xml-config... no
> >>>checking for valid libxml2... no
> >>>checking sys/file.h usability... yes
> >>>checking sys/file.h presence... yes
> >>>checking for sys/file.h... yes
> >>>checking sys/lockf.h usability... no
> >>>checking sys/lockf.h presence... no
> >>>checking for sys/lockf.h... no
> >>>checking syslog.h usability... no
> >>>checking syslog.h presence... no
> >>>checking for syslog.h... no
> >>>checking posix_evlog.h usability... no
> >>>checking posix_evlog.h presence... no
> >>>checking for posix_evlog.h... no
> >>>checking ss.h usability... no
> >>>checking ss.h presence... no
> >>>checking for ss.h... no
> >>>checking how to run the C preprocessor... gcc -E
> >>>checking whether we are using the GNU C++ compiler... (cached) yes
> >>>checking whether g++ accepts -g... (cached) yes
> >>>checking how to run the C++ preprocessor... g++ -E
> >>>checking whether g++ has built-in bool type... yes
> >>>checking whether g++ supports -fhandle-exceptions... no
> >>>checking whether g++ supports exception handling... yes
> >>>checking exception usability... yes
> >>>checking exception presence... yes
> >>>checking for exception... yes
> >>>checking whether g++ supports mutable... yes
> >>>checking whether g++ supports namespace... yes
> >>>checking wheather old style iostreams... no
> >>>checking whether g++ has new(size_t,void*)... yes
> >>>checking sstream usability... yes
> >>>checking sstream presence... yes
> >>>checking for sstream... yes
> >>>checking for debugging... no
> >>>checking for profiling... no
> >>>configure: creating ./config.status
> >>>config.status: creating src/ccgnu2-config
> >>>config.status: creating src/Makefile
> >>>config.status: creating win32/Makefile
> >>>config.status: creating m4/Makefile
> >>>config.status: creating config/Makefile
> >>>config.status: creating doc/Makefile
> >>>config.status: creating demo/Makefile
> >>>config.status: creating include/Makefile
> >>>config.status: creating include/cc++/Makefile
> >>>config.status: creating Makefile
> >>>config.status: creating template/Makefile
> >>>config.status: creating commoncpp2.spec
> >>>config.status: creating tests/Makefile
> >>>config.status: creating commoncpp2.proto
> >>>config.status: creating freebsd/Makefile
> >>>config.status: creating freebsd/pkg-plist
> >>>config.status: creating pkginfo
> >>>config.status: creating win32/CCXX2.rc
> >>>config.status: creating include/config.h
> >>>config.status: executing depfiles commands
> >>>
> >>>address@hidden ~/commoncpp2-1.0.13
> >>>
> >>>
> >>>=======snap configure on win32 using mingw/msys===============
> >>>i guess that is ok!?
> >>>
> >>>
> >>>
> >>>then i tried make:
> >>>===========snip make in msys/mingw ================
> >>>
> >>>address@hidden ~/commoncpp2-1.0.13
> >>>$ make
> >>>Making all in include
> >>>make[1]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13/include'
> >>>make  all-recursive
> >>>make[2]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13/include'
> >>>Making all in cc++
> >>>make[3]: Entering directory
> >>>`/home/Wolfgang/commoncpp2-1.0.13/include/cc++' make[3]: Nothing to be
> >>>done for `all'.
> >>>make[3]: Leaving directory
> >>>`/home/Wolfgang/commoncpp2-1.0.13/include/cc++' make[3]: Entering
> >>>directory `/home/Wolfgang/commoncpp2-1.0.13/include' make[3]: Nothing to
> >>>be done for `all-am'.
> >>>make[3]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/include'
> >>>make[2]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/include'
> >>>make[1]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/include'
> >>>Making all in win32
> >>>make[1]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13/win32'
> >>>make[1]: Nothing to be done for `all'.
> >>>make[1]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/win32'
> >>>Making all in template
> >>>make[1]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13/template'
> >>>make[1]: Nothing to be done for `all'.
> >>>make[1]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/template'
> >>>Making all in doc
> >>>make[1]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13/doc'
> >>>make[1]: Nothing to be done for `all'.
> >>>make[1]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13/doc'
> >>>make[1]: Entering directory `/home/Wolfgang/commoncpp2-1.0.13'
> >>>make[1]: Nothing to be done for `all-am'.
> >>>make[1]: Leaving directory `/home/Wolfgang/commoncpp2-1.0.13'
> >>>
> >>>address@hidden ~/commoncpp2-1.0.13
> >>>
> >>>===========snap make in msys/mingw ================
> >>>
> >>>well i was surpised that make returned with "nothing to do ...." so i
> >>>cd'ed int src/ and tried make within the src/ dir since no object files
> >>>had been created before...
> >>>
> >>>
> >>>===========snip make in src/ dir using msys/mingw ================
> >>>
> >>>address@hidden ~/commoncpp2-1.0.13/src
> >>>$ make
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT thread.lo -MD -MP -MF ".deps/thread.Tpo" \
> >>>  -c -o thread.lo `test -f 'thread.cpp' || echo './'`thread.cpp; \
> >>>then mv -f ".deps/thread.Tpo" ".deps/thread.Plo"; \
> >>>else rm -f ".deps/thread.Tpo"; exit 1; \
> >>>fi
> >>>mkdir .libs
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT thread.lo -MD -MP -MF
> >>>.deps/thread.Tpo -c thread.cpp  -DDLL_EXPORT -DPIC -o .libs/thread.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT thread.lo -MD -MP -MF
> >>>.deps/thread.Tpo -c thread.cpp -o thread.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT mutex.lo -MD -MP -MF ".deps/mutex.Tpo" \
> >>>  -c -o mutex.lo `test -f 'mutex.cpp' || echo './'`mutex.cpp; \
> >>>then mv -f ".deps/mutex.Tpo" ".deps/mutex.Plo"; \
> >>>else rm -f ".deps/mutex.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT mutex.lo -MD -MP -MF
> >>> .deps/mutex.Tpo -c mutex.cpp  -DDLL_EXPORT -DPIC -o .libs/mutex.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT mutex.lo -MD -MP -MF
> >>> .deps/mutex.Tpo -c mutex.cpp -o mutex.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT semaphore.lo -MD -MP -MF ".deps/semaphore.Tpo" \
> >>>  -c -o semaphore.lo `test -f 'semaphore.cpp' || echo
> >>> './'`semaphore.cpp; \ then mv -f ".deps/semaphore.Tpo"
> >>> ".deps/semaphore.Plo"; \
> >>>else rm -f ".deps/semaphore.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT semaphore.lo -MD -MP -MF
> >>>.deps/semaphore.Tpo -c semaphore.cpp  -DDLL_EXPORT -DPIC -o
> >>>.libs/semaphore.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT semaphore.lo -MD -MP -MF
> >>>.deps/semaphore.Tpo -c semaphore.cpp -o semaphore.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT threadkey.lo -MD -MP -MF ".deps/threadkey.Tpo" \
> >>>  -c -o threadkey.lo `test -f 'threadkey.cpp' || echo
> >>> './'`threadkey.cpp; \ then mv -f ".deps/threadkey.Tpo"
> >>> ".deps/threadkey.Plo"; \
> >>>else rm -f ".deps/threadkey.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT threadkey.lo -MD -MP -MF
> >>>.deps/threadkey.Tpo -c threadkey.cpp  -DDLL_EXPORT -DPIC -o
> >>>.libs/threadkey.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT threadkey.lo -MD -MP -MF
> >>>.deps/threadkey.Tpo -c threadkey.cpp -o threadkey.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT friends.lo -MD -MP -MF ".deps/friends.Tpo" \
> >>>  -c -o friends.lo `test -f 'friends.cpp' || echo './'`friends.cpp; \
> >>>then mv -f ".deps/friends.Tpo" ".deps/friends.Plo"; \
> >>>else rm -f ".deps/friends.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT friends.lo -MD -MP -MF
> >>>.deps/friends.Tpo -c friends.cpp  -DDLL_EXPORT -DPIC -o .libs/friends.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT friends.lo -MD -MP -MF
> >>>.deps/friends.Tpo -c friends.cpp -o friends.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT event.lo -MD -MP -MF ".deps/event.Tpo" \
> >>>  -c -o event.lo `test -f 'event.cpp' || echo './'`event.cpp; \
> >>>then mv -f ".deps/event.Tpo" ".deps/event.Plo"; \
> >>>else rm -f ".deps/event.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT event.lo -MD -MP -MF
> >>> .deps/event.Tpo -c event.cpp  -DDLL_EXPORT -DPIC -o .libs/event.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT event.lo -MD -MP -MF
> >>> .deps/event.Tpo -c event.cpp -o event.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT slog.lo -MD -MP -MF ".deps/slog.Tpo" \
> >>>  -c -o slog.lo `test -f 'slog.cpp' || echo './'`slog.cpp; \
> >>>then mv -f ".deps/slog.Tpo" ".deps/slog.Plo"; \
> >>>else rm -f ".deps/slog.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT slog.lo -MD -MP -MF .deps/slog.Tpo
> >>>-c slog.cpp -DDLL_EXPORT -DPIC -o .libs/slog.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT slog.lo -MD -MP -MF .deps/slog.Tpo
> >>>-c slog.cpp -o slog.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT dir.lo -MD -MP -MF ".deps/dir.Tpo" \
> >>>  -c -o dir.lo `test -f 'dir.cpp' || echo './'`dir.cpp; \
> >>>then mv -f ".deps/dir.Tpo" ".deps/dir.Plo"; \
> >>>else rm -f ".deps/dir.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT dir.lo -MD -MP -MF .deps/dir.Tpo -c
> >>>dir.cpp -DDLL_EXPORT -DPIC -o .libs/dir.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT dir.lo -MD -MP -MF .deps/dir.Tpo -c
> >>>dir.cpp -o dir.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT file.lo -MD -MP -MF ".deps/file.Tpo" \
> >>>  -c -o file.lo `test -f 'file.cpp' || echo './'`file.cpp; \
> >>>then mv -f ".deps/file.Tpo" ".deps/file.Plo"; \
> >>>else rm -f ".deps/file.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT file.lo -MD -MP -MF .deps/file.Tpo
> >>>-c file.cpp -DDLL_EXPORT -DPIC -o .libs/file.o
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT file.lo -MD -MP -MF .deps/file.Tpo
> >>>-c file.cpp -o file.o >/dev/null 2>&1
> >>>if /bin/sh ../libtool --mode=compile g++ -DHAVE_CONFIG_H -I. -I.
> >>>-I../include -I../src -DCCXX_EXPORT_LIBRARY  -I../win32 -g -O2
> >>>-D_GNU_SOURCE -MT inaddr.lo -MD -MP -MF ".deps/inaddr.Tpo" \
> >>>  -c -o inaddr.lo `test -f 'inaddr.cpp' || echo './'`inaddr.cpp; \
> >>>then mv -f ".deps/inaddr.Tpo" ".deps/inaddr.Plo"; \
> >>>else rm -f ".deps/inaddr.Tpo"; exit 1; \
> >>>fi
> >>> g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../src -DCCXX_EXPORT_LIBRARY
> >>>-I../ win32 -g -O2 -D_GNU_SOURCE -MT inaddr.lo -MD -MP -MF
> >>>.deps/inaddr.Tpo -c inaddr.cpp  -DDLL_EXPORT -DPIC -o .libs/inaddr.o
> >>>In file included from inaddr.cpp:43:
> >>>../include/cc++/socket.h:762: parse error before `*' token
> >>>../include/cc++/socket.h:775: ISO C++ forbids declaration of `ssize_t'
> >>>with no type
> >>>../include/cc++/socket.h:775: `ssize_t' declared as a `virtual' field
> >>>../include/cc++/socket.h:775: parse error before `(' token
> >>>../include/cc++/socket.h:785: ISO C++ forbids declaration of `ssize_t'
> >>>with no type
> >>>../include/cc++/socket.h:785: `ssize_t' declared as a `virtual' field
> >>>../include/cc++/socket.h:785: declaration of `int ost::Socket::ssize_t'
> >>>../include/cc++/socket.h:775: conflicts with previous declaration `int
> >>>   ost::Socket::ssize_t'
> >>>../include/cc++/socket.h:785: parse error before `(' token
> >>>../include/cc++/socket.h:785: duplicate member `ost::Socket::ssize_t'
> >>>make: *** [inaddr.lo] Error 1
> >>>
> >>>===========snap make in src/ dir using msys/mingw ================
> >>>that looked first promising, but the  i got some errors in socket.h.
> >>>
> >>>
> >>>thx in advance to all those having read this!!!
> >>>
> >>>any comments on why i fail to to build the commonc++ libs/dll's using a
> >>>crosscompile on my linux box or a compile within windows using
> >>> mingw/msys are welcome.
> >>>
> >>>Wolfgang
> >>>
> >>>Am Samstag, 20. Dezember 2003 23:41 schrieb address@hidden:
> >>>>Hi Wolfgang,
> >>>>
> >>>>I also have problems to configure commoncpp on mingw/msys.
> >>>>I have latest mingw/msys.
> >>>>Try the makefile in the distro.
> >>>>make -f Makefile.gcc
> >>>>You need to modify some path settings and you have to shift some files
> >>>>
> >>>>from one packet to the other because of dependency. Attached the
> >>>>
> >>>>makefile that is working for me. Tell me if this is not working for
> >>>> you.
> >>>>
> >>>>Best wishes,
> >>>>
> >>>>Adib.
> >>>
> >>>_______________________________________________
> >>>Bug-commoncpp mailing list
> >>>address@hidden
> >>>http://mail.gnu.org/mailman/listinfo/bug-commoncpp
> >
> > _______________________________________________
> > Bug-commoncpp mailing list
> > address@hidden
> > http://mail.gnu.org/mailman/listinfo/bug-commoncpp