configure requested bug report

[JJ Johns]

i got the following message when trying to compile bacula 1.34 on FreeBSD
5.2.1.
i added some additional possibly helpful information.
if you want anything else, please contact me.
Thanks for all your hard work.

-JJ



configure: WARNING: resolv.h: present but cannot be compiled
configure: WARNING: resolv.h: check for missing prerequisite headers?
configure: WARNING: resolv.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##



twist:~ $ gcc -v
Using built-in specs.
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 3.3.3 [FreeBSD] 20031106



twist:~ $ autoconf --version
autoconf (GNU Autoconf) 2.53
Written by David J. MacKenzie and Akim Demaille.

Copyright 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.



twist:~ $ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p5 #7: Thu Apr 29 14:20:38 EDT 2004
    address@hidden:/usr/obj/usr/src/sys/TWIST
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ec000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ec294.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.50GHz (2491.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 259522560 (247 MB)
avail memory = 242376704 (231 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (-263.-7C)
acpi_tz0: _PSV value is absurd, ignored (-273.-2C)
acpi_tz0: _ACx value is absurd, ignored (-267.-3C)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 10
pcib0: slot 29 INTC is routed to irq 5
pcib0: slot 29 INTD is routed to irq 3
pcib0: slot 31 INTB is routed to irq 9
pcib0: slot 31 INTB is routed to irq 9
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem
0xe8000000-0xe807ffff,0xf00
00000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11
at
device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 10
at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 5
at d
evice 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib1: slot 2 INTA is routed to irq 9
pcib1: slot 10 INTA is routed to irq 9
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem
0xe8100000-0xe81000ff ir
q 9 at device 2.0 on pci2
rl0: Ethernet address: 00:40:2b:66:84:d2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 9 at device 10.0 on
pci2
wi0: 802.11 address: 00:09:5b:69:1e:51
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-
0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xe4000-0xe4fff,0xe0000-0xe3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2491923760 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc2ce3860
ad0: 76319MB <WDC WD800EB-11DJF0> [155061/16/63] at ata0-master UDMA100
acd0: CDRW <LITE-ON COMBO LTC-48161H> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
wi0: promiscuous mode enabled