Re: [Bino-list] HW setup possible?

[Daniel Fratzscher]

Hi Torsten,

 

sorry for the late answer. I attached the two important config files. Please let me know if it works for you.

 

Best,

Daniel
 

> -----Ursprüngliche Nachricht-----
> An:	address@hidden; 
> Von:	Torsten Mohr <address@hidden>
> Gesendet:	Fr 23.03.2012 12:11
> Betreff:	Re: [Bino-list] HW setup possible?
> Hi,
>
> > Hi,
> > 
> > I have the 1920x2205 resolution setup working (with a GT240 non quadro).
> > You must have edid disabled and you need a working modeline. If you like
> > to, I can post my config files (Opensuse 12.1).
>
> YES, that would be really great.
>
>
> Best regards,
> Torsten.
>
>
> > 
> > Best,
> > Daniel
> > 
> > Am 21.03.2012 02:17, schrieb Brandt Westing:
> > > I've also used a nVidia 8800 GTX (no quad buffer support) and it worked.
> > > I haven't tried such high quality video, but I can test tomorrow an
> > > report the results for both cards (Quadro 6000 and 8800GTX). I have used
> > > 3 cards, 8800 GTX, Quadro 6000, and ATI FirePro 8750. All have worked
> > > with Bino.
> > > 
> > > Brandt
> > > 
> > > On Mar 20, 2012, at 8:10 PM,<address@hidden>
> > > 
> > >   <address@hidden>  wrote:
> > >> Hello,
> > >> 
> > >>> I've used Bino with a Samsung D7000 3D TV in checkerboard and
> > >>> interleaved modes and it works well. I've used both Quad Buffered
> > >>> OpenGL stereo and manually set the TV and Bino to these modes.
> > >> 
> > >> This means that Quad Buffering is not necessary?  I am not sure if my
> > >> GTX 580 has this available, i think only the Quadro cards have Quad
> > >> Buffering available, but i am not sure.
> > >> What graphics card do you use?
> > >> 
> > >>> One thing I had to do was rename the input port on the TV from "DVI" to
> > >>> "PC" using the TV settings so that post processing was disabled on the
> > >>> TV.
> > >> 
> > >> Thanks for your hints so far, but i'm not yet sure if my GTX 580 can
> > >> output 1920 x 2205 and then if the TV would interpret this as 3D data.
> > >> 
> > >>> Brandt
> > >>> 
> > >>> On Mar 20, 2012, at 4:19 PM, Martin Lambers wrote:
> > >>>> Hi Torsten,
> > >>>> 
> > >>>> On Mon, 19 Mar 2012 21:29:00 +0100, Torsten Mohr wrote:
> > >>>>> before buying a 3D TV i'd like to make sure that i can use it with
> > >>>>> bino / Linux, it would be great if you could give me some hints
> > >>>>> here.
> > >>>>> 
> > >>>>> I have a GTX580 in my Linux PC, i'd like to buy a 3D TV (looking at
> > >>> 
> > >>> Samsung at
> > >>> 
> > >>>>> the moment) and connect it to the PC via HDMI.
> > >>>>> 
> > >>>>> Will i then see the TV as an own display of size 1920 x 2205 ?
> > >>>>> 
> > >>>>> Is anything that i display in the upper half visible on one eye and
> > >>>>> things
> > >>> 
> > >>> i
> > >>> 
> > >>>>> display in the lower half visible on the other eye?
> > >>>>> Or is there more necessary to display 3D content via HDMI on a 3D TV?
> > >>>> 
> > >>>> I don't have a 3D TV myself, so I cannot make guarantees, but there
> > >>>> have been reports that using Bino with a 3D TV works fine. It depends
> > >>>> on which input modes the TV supports. Possible modes are HDMI frame
> > >>>> packing, above/below, side by side, frame alternating / page
> > >>>> flipping, checkerboard, ...  Do you have more information on this?
> > >>>> 
> > >>>> Martin

xorg_confs.tar.gz
Description: GNU Zip compressed data