hello all,
This is my first post here. I'm trying to setup an IVR fully VoIP based,
using Bayonne2 and SIP, on a Debian 3.1 base.
I've compiled and installed the following components:
Common CPP2 1.3.15
ccAudio2 0.7.7
ccScript3 0.7.2
ccrtp 1.3.2
osip2 2.2.1
eXosip 0.9.0 (--disable-josua)
bayonne2 0.6.4
Nothing weird at this point. I've set drivers.conf to use SIP and 2
timeslots. Launching in daemon mode or test mode gives me the same
result, as above:
# /usr/local/lib/bayonne-0.6/bayonne.bin -trace
sip /tmp/scripts/test.scr
starting 0.6.4 on i686 Linux; driver=sip, timeslots=2
libexec starting; path=/usr/local/lib/bayonne-0.6
libexec starting; path=/usr/local/lib/bayonne-0.6
loading french translator
sip/0: session starting
sip/1: session starting
sip: adding sdp encoding 0 PCMU/8000
sip: adding sdp encoding 101 telephony-event/8000
sip: bound to port 5060
sip/0: state=initial, event=100, seq=0
sip/0: state=idle, event=100, seq=0
sip/1: state=initial, event=100, seq=0
sip/1: state=idle, event=100, seq=0
sip msgport starting
compiled test; 4 steps
apps scanning /etc/bayonne
sip driver started; 2 timeslot(s) used
sip: event 000d; cid=1, did=2, rid=0
sip: invited sip:address@hidden from sip:address@hidden
sip: unknown uri sip:address@hidden
sip: event 0013; cid=1, did=2, rid=0
sip: got bye for non-existant call
sip: event 0015; cid=1, did=2, rid=0
my SIP UA is linphone.
After some researches I've read that that The sip driver is setup to
register to a sip server such as partysip"
http://lists.gnu.org/archive/html/bayonne-devel/2005-06/msg00048.html
So I've tried to setup partysip, then ser, to have a SIP server to
register to, but it isn't better.. maybe I've misunderstood something
Can someone give me some clues about configuration/testing of such a
server?
TIA