[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bug #60575] Permission denied on macOS Big Sur
From: |
Bernhard Nebel |
Subject: |
[bug #60575] Permission denied on macOS Big Sur |
Date: |
Sun, 11 Jul 2021 04:48:50 -0400 (EDT) |
User-agent: |
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:89.0) Gecko/20100101 Firefox/89.0 |
Follow-up Comment #4, bug #60575 (project avrdude):
Hi,
I tried Brian's recipe, and it works!
I was also curious whether it would work with the current codebase of avrdude.
So, I checked out the SVN rep and compiled the code in trunk/avrdude. As
mentioned by Joerg, the line to be added in the configure.ac file is already
there. While this version can access the ICE, it is not able to access the
MCU. I did a diff between the two versions, but it is more than just a few
lines, so I gave up.
Here is the output:
mac: avrdude> ./avrdude -c atmelice_isp -p m328p -t -v
avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/usr/local/etc/avrdude.conf"
Using Port : usb
Using Programmer : atmelice_isp
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATmega328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600
3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500
4500 0xff 0xff
lfuse 0 0 0 0 no 1 1 0 4500
4500 0x00 0x00
hfuse 0 0 0 0 no 1 1 0 4500
4500 0x00 0x00
efuse 0 0 0 0 no 1 1 0 4500
4500 0x00 0x00
lock 0 0 0 0 no 1 1 0 4500
4500 0x00 0x00
calibration 0 0 0 0 no 1 1 0 0
0 0x00 0x00
signature 0 0 0 0 no 3 1 0 0
0 0x00 0x00
Programmer Type : JTAG3_ISP
Description : Atmel-ICE (ARM/AVR) in ISP mode
Vtarget : 5.3 V
SCK period : 8.00 us
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: stk500v2_jtag3_recv(): error in jtagmkII_recv()
avrdude: AVR device initialized and ready to accept instructions
Reading | | 0%
0.00savrdude: jtag3_edbg_send(): Unexpected response 0x81, 0x11
avrdude: jtag3_edbg_recv(): Unexpected response 0x80
avrdude: stk500v2_jtag3_recv(): error in jtagmkII_recv()
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_send(): Unexpected response 0x40, 0xf2
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: stk500v2_jtag3_recv(): error in jtagmkII_recv()
Reading | ################# | 33%
0.85savrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_send(): Unexpected response 0x00, 0x00
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: stk500v2_jtag3_recv(): error in jtagmkII_recv()
Reading | ################################################## | 100% 1.45s
avrdude: Device signature = 0x303030
avrdude: Expected signature for ATmega328P is 1E 95 0F
Double check chip, or use -F to override this check.
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_send(): Unexpected response 0x0a, 0x0a
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: stk500v2_jtag3_recv(): error in jtagmkII_recv()
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_send(): Unexpected response 0xf9, 0x2e
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_send(): Unexpected response 0x32, 0x00
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_recv(): Unexpected response 0x00
avrdude: Short read, read only 0 out of 512 bytes
avrdude: jtag3_edbg_signoff(): failed to read from serial port (0)
avrdude done. Thank you.
mac: avrdude>
_______________________________________________________
Reply to this item at:
<https://savannah.nongnu.org/bugs/?60575>
_______________________________________________
Message sent via Savannah
https://savannah.nongnu.org/
- [bug #60575] Permission denied on macOS Big Sur,
Bernhard Nebel <=