[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] FuseBits display wrong values when exiting Terminal Mode
|
From: |
Ryan Genz |
|
Subject: |
[avrdude-dev] FuseBits display wrong values when exiting Terminal Mode |
|
Date: |
Tue, 21 Oct 2014 13:06:22 +0100 |
The values of the fusebits seem to be swapped in the summary display when
exiting terminal mode.
(Screenshot attached)
In summary: I have set the hfuse to d9 and the efuse to 07, but on exiting it
displays the following line:
avrdude: safemode: Fuses OK (H:07, E:D9, L:62)
It looks like H and E are swapped in the summary. (AVRDUDE 6.0.1)
It seems to just be a display issue. The actual bits were set correctly.
Regards, Ryan
- [avrdude-dev] FuseBits display wrong values when exiting Terminal Mode,
Ryan Genz <=