[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #27596] AT90s2333 is not correctly supported in avrdu
From: |
anonymous |
Subject: |
[avrdude-dev] [bug #27596] AT90s2333 is not correctly supported in avrdude.conf |
Date: |
Sun, 04 Oct 2009 18:40:22 +0000 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.14) Gecko/2009090216 Ubuntu/8.10 (intrepid) Firefox/3.0.14 |
URL:
<http://savannah.nongnu.org/bugs/?27596>
Summary: AT90s2333 is not correctly supported in
avrdude.conf
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Sun 04 Oct 2009 06:40:18 PM UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Eric
Originator Email: address@hidden
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
I could not get my programmer to work on my AT90s2333 however the programmer
did work if I inserted a mega8 device. After consulting the avrdude.conf file
I found this remark:
##### WARNING: No XML file for device 'AT90S2333'! #####
I also so that the setting for programming the mega8 and the 2333 are
different so this led my to believe something is missing. So I edited the
avrdude.conf file and stored it at my ~/.avrduderc. I took the sections from
the AT90s4433 device which is very simular except for the memory size. This is
what I have now:
#------------------------------------------------------------
# AT90s2333
#------------------------------------------------------------
part
id = "2333";
##### WARNING: No XML file for device 'AT90S2333'! #####
##### NOW withs Eric'x modifications #####
desc = "AT90S2333";
stk500_devcode = 0x42;
avr910_devcode = 0x34;
signature = 0x1e 0x91 0x05;
chip_erase_delay = 20000;
pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
"x x x x x x x x x x x x x x x x";
chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0",
"x x x x x x x x x x x x x x x x";
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 0;
pp_controlstack =
0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 0;
latchcycles = 0;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelayus = 0;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
chiperasepolltimeout = 0;
programfusepulsewidth = 2;
programfusepolltimeout = 0;
programlockpulsewidth = 0;
programlockpolltimeout = 1;
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0xff;
read_lo = " 0 0 1 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
read_hi = " 0 0 1 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" o o o o o o o o";
write_lo = " 0 1 0 0 0 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
write_hi = " 0 1 0 0 1 0 0 0",
" x x x x x x a9 a8",
" a7 a6 a5 a4 a3 a2 a1 a0",
" i i i i i i i i";
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
;
memory "signature"
size = 3;
read = "0 0 1 1 0 0 0 0 x x x x x x x
x",
"x x x x x x a1 a0 o o o o o o o
o";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0 1 0 1 0 0 0 0 x x x x x x x x",
"x x x x x x x x x x o o o o o o";
write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i",
"x x x x x x x x x x x x x x x x";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x",
"x x x x x x x x x x x x x o o x";
write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1",
"x x x x x x x x x x x x x x x x";
;
;
Sofar I have been able to program the device no. I did not come to testing it
yet since I need to upgrade my local software in order to do that. However my
gut feeling tells me it will work. If not I will file a additional bug.
I used the search mechanism with keyword AT90s2333 but did not get relevant
info. So I concluded I better file a bug.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?27596>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
- [avrdude-dev] [bug #27596] AT90s2333 is not correctly supported in avrdude.conf,
anonymous <=