[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-libc-dev] AT43USB35x support!
|
From: |
Keith Gudger |
|
Subject: |
Re: [avr-libc-dev] AT43USB35x support! |
|
Date: |
Fri, 28 Feb 2003 11:49:33 -0800 (PST) |
Attached are the files for the AT43USB320. I created the io43u32x.h file
and used it to generate the crt43320.o file.
Just a reminder, that the io.h file has to get updated, too, to include
the .h file. Thanks.
Keith
On Thu, 27 Feb 2003, Marek Michalkiewicz wrote:
> On Tue, Feb 25, 2003 at 12:17:47PM -0700, E. Weddington wrote:
> > Keith Gudger at Atmel <address@hidden>, has provided the attached
> > header to support the AT43USB35x devices. IIRC, he used the gcrt1.S
> > file with no modifications.
> >
> > Is there any way this can get rolled in within the next couple of
> > weeks?
>
> Done - at76c711 and at86rf401 too, and at43usb320 is easy to add
> when someone writes the header file. Please test. GCC requires
> a small fix (MULTILIB_MATCHES in config/avr/t-avr was broken for
> at43usb355), just committed to both mainline and 3.3 branch...
>
> Marek
>
>
/* Copyright (c) 2003, Keith Gudger
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. */
/* avr/io43u32x.h - definitions for AT43USB32x */
#ifndef _AVR_IO43U32X_H_
#define _AVR_IO43U32X_H_ 1
/* This file should only be included from <avr/io.h>, never directly. */
#ifndef _AVR_IO_H_
# error "Include <avr/io.h> instead of this file."
#endif
#ifndef _AVR_IOXXX_H_
# define _AVR_IOXXX_H_ "io43u32x.h"
#else
# error "Attempt to include more than one <avr/ioXXX.h> file."
#endif
/* I/O registers */
/* Analog Comparator Control and Status Register */
#define ACSR _SFR_IO8(0x08)
/* UART Baud Rate Register */
#define UBRR _SFR_IO8(0x09)
/* UART Control Register */
#define UCR _SFR_IO8(0x0A)
/* UART Status Register */
#define USR _SFR_IO8(0x0B)
/* UART I/O Data Register */
#define UDR _SFR_IO8(0x0C)
/* SPI Control Register */
#define SPCR _SFR_IO8(0x0D)
/* SPI Status Register */
#define SPSR _SFR_IO8(0x0E)
/* SPI I/O Data Register */
#define SPDR _SFR_IO8(0x0F)
/* Input Pins, Port E */ // new port for 43324/6
#define SPDR _SFR_IO8(0x01)
/* Data Direction Register, Port E */
#define SPDR _SFR_IO8(0x02)
/* Data Register, Port E */
#define SPDR _SFR_IO8(0x03)
/* Input Pins, Port D */
#define PIND _SFR_IO8(0x10)
/* Data Direction Register, Port D */
#define DDRD _SFR_IO8(0x11)
/* Data Register, Port D */
#define PORTD _SFR_IO8(0x12)
/* Input Pins, Port C */
#define PINC _SFR_IO8(0x13)
/* Data Direction Register, Port C */
#define DDRC _SFR_IO8(0x14)
/* Data Register, Port C */
#define PORTC _SFR_IO8(0x15)
/* Input Pins, Port B */
#define PINB _SFR_IO8(0x16)
/* Data Direction Register, Port B */
#define DDRB _SFR_IO8(0x17)
/* Data Register, Port B */
#define PORTB _SFR_IO8(0x18)
/* Input Pins, Port A */
#define PINA _SFR_IO8(0x19)
/* Data Direction Register, Port A */
#define DDRA _SFR_IO8(0x1A)
/* Data Register, Port A */
#define PORTA _SFR_IO8(0x1B)
/* 0x1C..0x1F EEPROM */
/* Watchdog Timer Control Register */
#define WDTCR _SFR_IO8(0x21)
/* T/C 1 Input Capture Register */
#define ICR1 _SFR_IO16(0x24)
#define ICR1L _SFR_IO8(0x24)
#define ICR1H _SFR_IO8(0x25)
/* Timer/Counter1 Output Compare Register B */
#define OCR1B _SFR_IO16(0x28)
#define OCR1BL _SFR_IO8(0x28)
#define OCR1BH _SFR_IO8(0x29)
/* Timer/Counter1 Output Compare Register A */
#define OCR1A _SFR_IO16(0x2A)
#define OCR1AL _SFR_IO8(0x2A)
#define OCR1AH _SFR_IO8(0x2B)
/* Timer/Counter 1 */
#define TCNT1 _SFR_IO16(0x2C)
#define TCNT1L _SFR_IO8(0x2C)
#define TCNT1H _SFR_IO8(0x2D)
/* Timer/Counter 1 Control and Status Register */
#define TCCR1B _SFR_IO8(0x2E)
/* Timer/Counter 1 Control Register */
#define TCCR1A _SFR_IO8(0x2F)
/* Timer/Counter 0 */
#define TCNT0 _SFR_IO8(0x32)
/* Timer/Counter 0 Control Register */
#define TCCR0 _SFR_IO8(0x33)
/* MCU general Control Register */
#define MCUCR _SFR_IO8(0x35)
/* Timer/Counter Interrupt Flag Register */
#define TIFR _SFR_IO8(0x38)
/* Timer/Counter Interrupt MaSK register */
#define TIMSK _SFR_IO8(0x39)
/* General Interrupt Control Register */
#define GIFR _SFR_IO8(0x3A)
/* General Interrupt Mask register */
#define GIMSK _SFR_IO8(0x3B)
/* Interrupt vectors */
#define SIG_INTERRUPT0 _VECTOR(1)
#define SIG_INTERRUPT1 _VECTOR(2)
#define SIG_TIMER1_CAPT1 _VECTOR(3)
#define SIG_OUTPUT_COMPARE1A _VECTOR(4)
#define SIG_OUTPUT_COMPARE1B _VECTOR(5)
#define SIG_OVERFLOW1 _VECTOR(6)
#define SIG_OVERFLOW0 _VECTOR(7)
#define SIG_SPI _VECTOR(8)
#define SIG_UART_RECV _VECTOR(9)
#define SIG_UART_DATA _VECTOR(10)
#define SIG_UART_TRANS _VECTOR(11)
#define SIG_ANA_COMP _VECTOR(12)
#define SIG_USB_INT _VECTOR(12)
#define _VECTORS_SIZE 52
#define INT0_interrupt(x) SIGNAL (SIG_INTERRUPT0)
#define INT1_interrupt(x) SIGNAL (SIG_INTERRUPT1)
#define TIMER1_CAPT1_interrupt(x) SIGNAL (SIG_TIMER1_CAPT1)
#define TIMER1_COMPA_interrupt(x) SIGNAL (SIG_OUTPUT_COMPARE1A)
#define TIMER1_COMPB_interrupt(x) SIGNAL (SIG_OUTPUT_COMPARE1B)
#define TIMER1_OVF1_interrupt(x) SIGNAL (SIG_OVERFLOW1)
#define TIMER0_OVF_interrupt(x) SIGNAL (SIG_OVERFLOW0)
#define SPI_interrupt(x) SIGNAL (SIG_SPI)
#define UART_RX_interrupt(x) SIGNAL (SIG_UART_RECV)
#define UART_UDRE_interrupt(x) SIGNAL (SIG_UART_DATA)
#define UART_TX_interrupt(x) SIGNAL (SIG_UART_TRANS)
#define ANA_COMP_interrupt(x) SIGNAL (SIG_ANA_COMP)
#define USB_interrupt(x) SIGNAL (SIG_USB_INT)
#define SuspendResume(x) SIGNAL (SIG_INTERRUPT0)
/*
The Register Bit names are represented by their bit number (0-7).
*/
/* Timer/Counter Interrupt MaSK register */
#define TICIE1 5
#define OCIE1A 6
#define OCIE1B 5
#define TOIE1 7
#define TOIE0 1
/* Timer/Counter Interrupt Flag Register */
#define ICF1 3
#define OCF1A 6
#define OCF1B 5
#define TOV1 7
#define TOV0 1
/* MCU general Control Register */
#define SE 5
#define SM 4
#define ISC11 3
#define ISC10 2
#define ISC01 1
#define ISC00 0
/* Timer/Counter 0 Control Register */
#define CS02 2
#define CS01 1
#define CS00 0
/* Timer/Counter 1 Control Register */
#define COM1A1 7
#define COM1A0 6
#define COM1B1 5
#define COM1B0 4
#define PWM11 1
#define PWM10 0
/* Timer/Counter 1 Control and Status Register */
#define ICNC1 7
#define ICES1 6
#define CTC1 3
#define CS12 2
#define CS11 1
#define CS10 0
/* Watchdog Timer Control Register */
#define WDTOE 4
#define WDE 3
#define WDP2 2
#define WDP1 1
#define WDP0 0
/* Data Register, Port A */
#define PA7 7
#define PA6 6
#define PA5 5
#define PA4 4
#define PA3 3
#define PA2 2
#define PA1 1
#define PA0 0
/* Data Direction Register, Port A */
#define DDA7 7
#define DDA6 6
#define DDA5 5
#define DDA4 4
#define DDA3 3
#define DDA2 2
#define DDA1 1
#define DDA0 0
/* Input Pins, Port A */
#define PINA7 7
#define PINA6 6
#define PINA5 5
#define PINA4 4
#define PINA3 3
#define PINA2 2
#define PINA1 1
#define PINA0 0
/* Data Register, Port B */
#define PB7 7
#define PB6 6
#define PB5 5
#define PB4 4
#define PB3 3
#define PB2 2
#define PB1 1
#define PB0 0
/* Data Direction Register, Port B */
#define DDB7 7
#define DDB6 6
#define DDB5 5
#define DDB4 4
#define DDB3 3
#define DDB2 2
#define DDB1 1
#define DDB0 0
/* Input Pins, Port B */
#define PINB7 7
#define PINB6 6
#define PINB5 5
#define PINB4 4
#define PINB3 3
#define PINB2 2
#define PINB1 1
#define PINB0 0
/* Data Direction Register, Port C */
#define DDC7 7
#define DDC6 6
#define DDC5 5
#define DDC4 4
#define DDC3 3
#define DDC2 2
#define DDC1 1
#define DDC0 0
/* Input Pins, Port C */
#define PINC7 7
#define PINC6 6
#define PINC5 5
#define PINC4 4
#define PINC3 3
#define PINC2 2
#define PINC1 1
#define PINC0 0
/* Data Register, Port C */
#define PC7 7
#define PC6 6
#define PC5 5
#define PC4 4
#define PC3 3
#define PC2 2
#define PC1 1
#define PC0 0
/* Data Register, Port D */
#define PD7 7
#define PD6 6
#define PD5 5
#define PD4 4
#define PD3 3
#define PD2 2
#define PD1 1
#define PD0 0
/* Data Direction Register, Port D */
#define DDD7 7
#define DDD6 6
#define DDD5 5
#define DDD4 4
#define DDD3 3
#define DDD2 2
#define DDD1 1
#define DDD0 0
/* Input Pins, Port D */
#define PIND7 7
#define PIND6 6
#define PIND5 5
#define PIND4 4
#define PIND3 3
#define PIND2 2
#define PIND1 1
#define PIND0 0
/* Data Register, Port E */
#define PE7 7
#define PE6 6
#define PE5 5
#define PE4 4
#define PE3 3
#define PE2 2
#define PE1 1
#define PE0 0
/* Data Direction Register, Port E */
#define DDE7 7
#define DDE6 6
#define DDE5 5
#define DDE4 4
#define DDE3 3
#define DDE2 2
#define DDE1 1
#define DDE0 0
/* Input Pins, Port E */
#define PINE7 7
#define PINE6 6
#define PINE5 5
#define PINE4 4
#define PINE3 3
#define PINE2 2
#define PINE1 1
#define PINE0 0
/* SPI Status Register */
#define SPIF 7
#define WCOL 6
/* SPI Control Register */
#define SPIE 7
#define SPE 6
#define DORD 5
#define MSTR 4
#define CPOL 3
#define CPHA 2
#define SPR1 1
#define SPR0 0
/* UART Status Register */
#define RXC 7
#define TXC 6
#define UDRE 5
#define FE 4
#define DOR 3
/* UART Control Register */
#define RXCIE 7
#define TXCIE 6
#define UDRIE 5
#define RXEN 4
#define TXEN 3
#define CHR9 2
#define RXB8 1
#define TXB8 0
/* Constants */
#define RAMEND 0x025F /*Last On-Chip SRAM Location*/
#define XRAMEND 0x025F
#define E2END 0x0000
#define FLASHEND 0x0FFFF
#define flash const
#define near
#define far
#define C_task int
#define AVR_INTERRUPT(x)
#define ROM_BYTE_POINTER unsigned char flash *
#endif /* _AVR_43USB355_H_ */
crt43320.o
Description: Binary data
- [avr-libc-dev] AT43USB35x support!, E. Weddington, 2003/02/25
- Re: [avr-libc-dev] AT43USB35x support!, Marek Michalkiewicz, 2003/02/27
- Re: [avr-libc-dev] AT43USB35x support!, E. Weddington, 2003/02/27
- Re: [avr-libc-dev] AT43USB35x support!,
Keith Gudger <=
- Re: [avr-libc-dev] AT43USB35x support!, E. Weddington, 2003/02/28
- Re: [avr-libc-dev] AT43USB35x support!, Keith Gudger, 2003/02/28
- Re: [avr-libc-dev] AT43USB35x support!, Joerg Wunsch, 2003/02/28
- Re: [avr-libc-dev] AT43USB35x support!, Marek Michalkiewicz, 2003/02/28
- Re: [avr-libc-dev] AT43USB35x support!, Keith Gudger, 2003/02/28