[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Problem reading from port (ADC)
|
From: |
Viktor Lopatin |
|
Subject: |
Re: [avr-gcc-list] Problem reading from port (ADC) |
|
Date: |
Mon, 29 Aug 2005 10:04:34 +0300 |
Smithy,
On Sun, 28 Aug 2005 10:17:48, Matthew Smith wrote:
> I *did* remember to set DDRA to 0; I tried turning pullup on for the
> port, but the ADC doesn't seem to be able to pull it back down again.
It is necessary to set DDRA=0; PORTA=0xff to tune up the port A for input data.
Value of inputs of port takes from register PINA. The external storage
mast be off.
_______________________________________________________
AVR-GCC-list mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/avr-gcc-listua