[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-chat] avrdude, stk600, updi, attiny3216

From: Rogier Wolff
Subject: Re: [avr-chat] avrdude, stk600, updi, attiny3216
Date: Tue, 11 Jun 2019 08:49:26 +0200
User-agent: Mutt/1.5.21 (2010-09-15)

On Mon, Jun 10, 2019 at 08:11:58PM +0200, Martin Stejskal wrote:
> 1) Clock is set too high. 
> 2) Low voltage on target.
> 3) Wrong fuse settings
> 4) Wiring

None of the above: 

> po 10. 6. 2019 v 18:09 odesílatel Till Sellschopp <address@hidden>

> > avrdude: stk500v2_program_enable(): program enable instruction not defined
> > for part "ATtiny3216"

The error message says that your configuration file fails to define a 
"program enable" instruction for your part. 

Double check your configuration file, download a newer one, install it
and double check that avrdude is indeed using the one you think it
should use.


** address@hidden ** https://www.BitWizard.nl/ ** +31-15-2049110 **
**    Delftechpark 11 2628 XJ  Delft, The Netherlands.  KVK: 27239233    **
The plan was simple, like my brother-in-law Phil. But unlike
Phil, this plan just might work.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]