[avr-chat] avrdude with USB on Linux

[Juergen Harms]

I intend to incorporate a patch into the avrdude rpm on Mageia that 
fixes the use of avrdude with usb for non-root users. I have found 
plenty of discussions on this issue, the fix is essentially based on

http://www.mikrocontroller.net/articles/AVRDUDE

I append a copy of set of udev rules proposed in this article.

I have experimentally build an rpm with such a patch (which also deals 
with the fact that GROUP="users" appears not to work on Mageia) - the 
rpm works as it should. Before officially introducing such a patch into 
the distribution, I would like to verify

  1. that the vendor and product IDs quoted are correct and
  2. whether there are additional devices to be covered.

I do not have the hardware that would allow me to simply install the 
patch and verify by testing.Can people in this list propose corrections 
/ confirmation?

I have already found one issue: my AVR ISP mkII (JTAG) has product ID 
2103 rather than 2104. Is 2104 a typo, or do I simply own an old JTAG 
and there should be rules for both product IDs

Thanks for your help, Juergen

--------- udev rules proposed ----------

# Atmel AVR ISP mkII
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2104", 
GROUP="users", MODE="0660"

# usbprog bootloader
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c62", GROUP="users", 
MODE="0660"

# USBasp programmer
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", GROUP="users", 
MODE="0660"

# USBtiny programmer
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c9f", GROUP="users", 
MODE="0660"