[Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.11-246-g22ee3bd

[Stefano Lattarini]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".

http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=22ee3bdfb7d140f61e276eae28fbabe321f6c32a

The branch, maint has been updated
       via  22ee3bdfb7d140f61e276eae28fbabe321f6c32a (commit)
      from  2601fd8f5688a2e9cb4c723c1c42007d3c019fca (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
-----------------------------------------------------------------------

Summary of changes:
 ChangeLog                                          |   23 ++++++++++++++++++++
 tests/Makefile.am                                  |    9 +++++--
 tests/Makefile.in                                  |    9 +++++--
 tests/{silentlex.test => silent-lex-gcc.test}      |   13 ++++++-----
 tests/{silentlex.test => silent-lex-generic.test}  |    9 ++++---
 tests/{silent5.test => silent-many-gcc.test}       |   15 +++++++------
 tests/{silent5.test => silent-many-generic.test}   |   13 +++++++----
 tests/{silentyacc.test => silent-yacc-gcc.test}    |   13 ++++++-----
 .../{silentyacc.test => silent-yacc-generic.test}  |    9 ++++---
 9 files changed, 75 insertions(+), 38 deletions(-)
 copy tests/{silentlex.test => silent-lex-gcc.test} (90%)
 rename tests/{silentlex.test => silent-lex-generic.test} (92%)
 copy tests/{silent5.test => silent-many-gcc.test} (91%)
 rename tests/{silent5.test => silent-many-generic.test} (91%)
 copy tests/{silentyacc.test => silent-yacc-gcc.test} (90%)
 rename tests/{silentyacc.test => silent-yacc-generic.test} (92%)

diff --git a/ChangeLog b/ChangeLog
index 2cbce3b..7024f4b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,26 @@
+2010-11-25  Stefano Lattarini  <address@hidden>
+
+       Fix spurious failures in `silent*.test' for $CC != gcc
+       In some tests on automake-produced silent rules, we forced the
+       use of gcc depmode to improve testsuite coverage; but this has
+       unsurprisingly led to spurious failures when some non-GNU C
+       compilers were used.  So we are now careful to require GCC in
+       tests that force gcc depmode.
+       From reports by Ralf Wildenhues.
+       * silent5.test: Test removed, its content split into ...
+       * silent-many-generic.test, silent-many-gcc.test: ... these new
+       sister tests, the latter of which forces gcc depmode and lists
+       "gcc" in $required.
+       * silentlex.test: Test removed, its content split into ...
+       * silent-lex-generic.test, silent-lex-gcc.test: ... these new
+       sister tests, the latter of which forces gcc depmode and lists
+       "gcc" in $required.
+       * silentyacc.test: Test removed, its content split into ...
+       * silent-yacc-generic.test, silent-yacc-gcc.test: ... these new
+       sister tests, the latter of which forces gcc depmode and lists
+       "gcc" in $required.
+       * tests/Makefile.am (TESTS): Updated.
+
 2010-11-21  Stefano Lattarini  <address@hidden>
 
        Tests: consistently use "|| Exit 1" after ". ./defs".
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 5f1ab9e..dab04e3 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -632,15 +632,18 @@ silent.test \
 silent2.test \
 silent3.test \
 silent4.test \
-silent5.test \
 silent6.test \
 silent7.test \
 silent9.test \
 silentcxx.test \
 silentf77.test \
 silentf90.test \
-silentlex.test \
-silentyacc.test \
+silent-many-gcc.test \
+silent-many-generic.test \
+silent-lex-gcc.test \
+silent-lex-generic.test \
+silent-yacc-gcc.test \
+silent-yacc-generic.test \
 sinclude.test \
 srcsub.test \
 srcsub2.test \
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 140b178..de21f43 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -899,15 +899,18 @@ silent.test \
 silent2.test \
 silent3.test \
 silent4.test \
-silent5.test \
 silent6.test \
 silent7.test \
 silent9.test \
 silentcxx.test \
 silentf77.test \
 silentf90.test \
-silentlex.test \
-silentyacc.test \
+silent-many-gcc.test \
+silent-many-generic.test \
+silent-lex-gcc.test \
+silent-lex-generic.test \
+silent-yacc-gcc.test \
+silent-yacc-generic.test \
 sinclude.test \
 srcsub.test \
 srcsub2.test \
diff --git a/tests/silentlex.test b/tests/silent-lex-gcc.test
similarity index 90%
copy from tests/silentlex.test
copy to tests/silent-lex-gcc.test
index 5ad430e..426dc50 100755
--- a/tests/silentlex.test
+++ b/tests/silent-lex-gcc.test
@@ -14,9 +14,10 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Check silent-rules mode for Lex.
+# Check silent-rules mode for Lex, forcing gcc depmode.
+# Keep this in sync with sister test `silent-lex-generic.test'.
 
-required='flex'
+required='flex gcc'
 . ./defs || Exit 1
 
 set -e
@@ -63,11 +64,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force gcc ("fast") depmode.
+# This apparently useless "for" loop is here to simplify the syncing
+# with sister test `silent-lex-gcc.test'.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  am_cv_CC_dependencies_compiler_type=gcc
 do
   ./configure $config_args --enable-silent-rules
 
diff --git a/tests/silentlex.test b/tests/silent-lex-generic.test
similarity index 92%
rename from tests/silentlex.test
rename to tests/silent-lex-generic.test
index 5ad430e..66535e8 100755
--- a/tests/silentlex.test
+++ b/tests/silent-lex-generic.test
@@ -15,6 +15,7 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # Check silent-rules mode for Lex.
+# Keep this in sync with sister test `silent-lex-gcc.test'.
 
 required='flex'
 . ./defs || Exit 1
@@ -63,11 +64,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force dependency tracking explicitly, so that slow dependency
+# extractors are not rejected.  Try also with dependency tracking
+# explicitly disabled.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  --enable-dependency-tracking --disable-dependency-tracking
 do
   ./configure $config_args --enable-silent-rules
 
diff --git a/tests/silent5.test b/tests/silent-many-gcc.test
similarity index 91%
copy from tests/silent5.test
copy to tests/silent-many-gcc.test
index 49039b8..d770a46 100755
--- a/tests/silent5.test
+++ b/tests/silent-many-gcc.test
@@ -14,13 +14,14 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Check silent-rules mode, languages other than C.
+# Check silent-rules mode, with gcc depmode and many languages at once.
 # This test partly overlaps with other silent*.test, but it serves as
 # a stress test by using many different languages at once -- so don't
 # remove this test script.
+# This test requires the GNU compilers; keep it in sync with sister test
+# `silent-many-generic.test', which should work with generic compilers.
 
-# FIXME: generic C++/Fortran compilers should suffice here
-required='g++ gfortran flex bison'
+required='gcc g++ gfortran flex bison'
 . ./defs || Exit 1
 
 set -e
@@ -181,11 +182,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force gcc ("fast") depmode.
+# This apparently useless "for" loop is here to simplify the syncing
+# with sister test `silent-many-gcc.test'.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  am_cv_CC_dependencies_compiler_type=gcc
 do
 
   ./configure $config_args --enable-silent-rules
diff --git a/tests/silent5.test b/tests/silent-many-generic.test
similarity index 91%
rename from tests/silent5.test
rename to tests/silent-many-generic.test
index 49039b8..223a97c 100755
--- a/tests/silent5.test
+++ b/tests/silent-many-generic.test
@@ -14,10 +14,13 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Check silent-rules mode, languages other than C.
+# Check silent-rules mode, with many languages at once.
 # This test partly overlaps with other silent*.test, but it serves as
 # a stress test by using many different languages at once -- so don't
 # remove this test script.
+# This test should work with generic compilers; keep it in sync with
+# sister test `silent-many-gcc.test', which requires the GNU compilers
+# and forces the use of gcc depmode.
 
 # FIXME: generic C++/Fortran compilers should suffice here
 required='g++ gfortran flex bison'
@@ -181,11 +184,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force dependency tracking explicitly, so that slow dependency
+# extractors are not rejected.  Try also with dependency tracking
+# explicitly disabled.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  --enable-dependency-tracking --disable-dependency-tracking
 do
 
   ./configure $config_args --enable-silent-rules
diff --git a/tests/silentyacc.test b/tests/silent-yacc-gcc.test
similarity index 90%
copy from tests/silentyacc.test
copy to tests/silent-yacc-gcc.test
index d311e3d..33ae8ae 100755
--- a/tests/silentyacc.test
+++ b/tests/silent-yacc-gcc.test
@@ -14,9 +14,10 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Check silent-rules mode for Yacc.
+# Check silent-rules mode for Yacc, forcing gcc depmode.
+# Keep this in sync with sister test `silent-yacc-generic.test'.
 
-required='bison'
+required='gcc bison'
 . ./defs || Exit 1
 
 set -e
@@ -65,11 +66,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force gcc ("fast") depmode.
+# This apparently useless "for" loop is here to simplify the syncing
+# with sister test `silent-yacc-gcc.test'.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  am_cv_CC_dependencies_compiler_type=gcc
 do
   ./configure $config_args --enable-silent-rules
 
diff --git a/tests/silentyacc.test b/tests/silent-yacc-generic.test
similarity index 92%
rename from tests/silentyacc.test
rename to tests/silent-yacc-generic.test
index d311e3d..b7489da 100755
--- a/tests/silentyacc.test
+++ b/tests/silent-yacc-generic.test
@@ -15,6 +15,7 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # Check silent-rules mode for Yacc.
+# Keep this in sync with sister test `silent-yacc-gcc.test'.
 
 required='bison'
 . ./defs || Exit 1
@@ -65,11 +66,11 @@ $ACLOCAL
 $AUTOMAKE --add-missing
 $AUTOCONF
 
-# configure once for fastdep, once for non-fastdep, once for nodep
+# Force dependency tracking explicitly, so that slow dependency
+# extractors are not rejected.  Try also with dependency tracking
+# explicitly disabled.
 for config_args in \
-  '' \
-  am_cv_CC_dependencies_compiler_type=gcc \
-  --disable-dependency-tracking
+  --enable-dependency-tracking --disable-dependency-tracking
 do
   ./configure $config_args --enable-silent-rules
 


hooks/post-receive
-- 
GNU Automake