[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: autoreconf behavior
From: |
Walter E. Brown |
Subject: |
Re: autoreconf behavior |
Date: |
Sun, 02 Feb 2003 11:57:01 -0600 |
Thank you for finding the typo. Alas, after fixing both occurrences, there
seems to be a further problem. While autoreconf now seems to run
correctly, the following:
cd toppkg; ./configure
gives the message:
configure: error: cannot find install-sh or install.sh in . ./..
./../..
This message is correct, of course, because I asked to have the tools
installed in toppkg/autotools (which directory I made before running
autoreconf). Is there something further I must do to have configure look
in the correct place, as defined by the install-script?
I enclose the project's updated files; thank you in advance for any further
suggestions.
Best,
- WEB
----- Original Message -----
From: "Alexandre Duret-Lutz" <address@hidden>
To: "Walter E. Brown" <address@hidden>
Cc: <address@hidden>
Sent: Sunday, February 02, 2003 10:55 AM
Subject: Re: autoreconf behavior
| >>> "Walter" == Walter E Brown <address@hidden> writes:
|
| Walter> AC_OUTPUT[Makefile]
|
| This should read `AC_OUTPUT([Makefile])'.
########### cut here ##########
#!/bin/sh
# This is a shell archive (produced by GNU sharutils 4.2.1).
# To extract the files from this archive, save it to some FILE, remove
# everything before the `!/bin/sh' line above, then type `sh FILE'.
#
# Made on 2003-02-02 11:45 CST by <address@hidden>.
# Source directory was `/home/Administrator'.
#
# Existing files will *not* be overwritten unless `-c' is specified.
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 236 -rw-r--r-- toppkg/configure.ac
# 114 -rw-r--r-- toppkg/Makefile.am
# 254 -rw-r--r-- toppkg/subpkg/configure.ac
# 104 -rw-r--r-- toppkg/subpkg/Makefile.am
# 1051 -rwxr-xr-x toppkg/subpkg/pkg-config.ac
#
save_IFS="${IFS}"
IFS="${IFS}:"
gettext_dir=FAILED
locale_dir=FAILED
first_param="$1"
for dir in $PATH
do
if test "$gettext_dir" = FAILED && test -f $dir/gettext \
&& ($dir/gettext --version >/dev/null 2>&1)
then
set `$dir/gettext --version 2>&1`
if test "$3" = GNU
then
gettext_dir=$dir
fi
fi
if test "$locale_dir" = FAILED && test -f $dir/shar \
&& ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
then
locale_dir=`$dir/shar --print-text-domain-dir`
fi
done
IFS="$save_IFS"
if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
then
echo=echo
else
TEXTDOMAINDIR=$locale_dir
export TEXTDOMAINDIR
TEXTDOMAIN=sharutils
export TEXTDOMAIN
echo="$gettext_dir/gettext -s"
fi
if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f
200112312359.59 -a -f $$.touch; then
shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f
123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f
1231235901 -a -f $$.touch; then
shar_touch='touch -am $3$4$5$6$2 "$8"'
else
shar_touch=:
echo
$echo 'WARNING: not restoring timestamps. Consider getting and'
$echo "installing GNU \`touch', distributed in GNU File Utilities..."
echo
fi
rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
#
if mkdir _sh01548; then
$echo 'x -' 'creating lock directory'
else
$echo 'failed to create lock directory'
exit 1
fi
# ============= toppkg/configure.ac ==============
if test ! -d 'toppkg'; then
$echo 'x -' 'creating directory' 'toppkg'
mkdir 'toppkg'
fi
if test -f 'toppkg/configure.ac' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'toppkg/configure.ac' '(file already exists)'
else
$echo 'x -' extracting 'toppkg/configure.ac' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'toppkg/configure.ac' &&
AC_PREREQ(2.57)
AC_INIT(auto_top, 0.0, address@hidden)
X
AM_INIT_AUTOMAKE(1.7 foreign)
X
AC_CONFIG_HEADERS([defs.h])
X
AC_CONFIG_SRCDIR([configure.ac])
AC_CONFIG_AUX_DIR([autotools])
X
AC_CONFIG_SUBDIRS([subpkg])
X
AC_OUTPUT([Makefile])
SHAR_EOF
(set 20 03 02 02 11 40 48 'toppkg/configure.ac'; eval "$shar_touch") &&
chmod 0644 'toppkg/configure.ac' ||
$echo 'restore of' 'toppkg/configure.ac' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'toppkg/configure.ac:' 'MD5 check failed'
b4d7908a099179d1eb21e0d091c8280f toppkg/configure.ac
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'toppkg/configure.ac'`"
test 236 -eq "$shar_count" ||
$echo 'toppkg/configure.ac:' 'original size' '236,' 'current size'
"$shar_count!"
fi
fi
# ============= toppkg/Makefile.am ==============
if test -f 'toppkg/Makefile.am' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'toppkg/Makefile.am' '(file already exists)'
else
$echo 'x -' extracting 'toppkg/Makefile.am' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'toppkg/Makefile.am' &&
## Process this file with automake to produce Makefile.in
X
X
SUBDIRS = . @subdirs@
X
X
#bin_SCRIPTS = CLHEP-config
X~
SHAR_EOF
(set 20 03 02 02 06 51 48 'toppkg/Makefile.am'; eval "$shar_touch") &&
chmod 0644 'toppkg/Makefile.am' ||
$echo 'restore of' 'toppkg/Makefile.am' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'toppkg/Makefile.am:' 'MD5 check failed'
c082a0972e1ea4dac7a2ee912c229181 toppkg/Makefile.am
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'toppkg/Makefile.am'`"
test 114 -eq "$shar_count" ||
$echo 'toppkg/Makefile.am:' 'original size' '114,' 'current size'
"$shar_count!"
fi
fi
# ============= toppkg/subpkg/configure.ac ==============
if test ! -d 'toppkg/subpkg'; then
$echo 'x -' 'creating directory' 'toppkg/subpkg'
mkdir 'toppkg/subpkg'
fi
if test -f 'toppkg/subpkg/configure.ac' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'toppkg/subpkg/configure.ac' '(file already exists)'
else
$echo 'x -' extracting 'toppkg/subpkg/configure.ac' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'toppkg/subpkg/configure.ac' &&
AC_PREREQ(2.57)
AC_INIT(auto_top, 0.0, address@hidden)
X
AM_INIT_AUTOMAKE(1.7 foreign)
X
AC_CONFIG_HEADERS([defs.h])
X
AC_CONFIG_SRCDIR([configure.ac])
AC_CONFIG_AUX_DIR([../autotools])
X
AC_OUTPUT([Makefile] address@hidden@-config.sh:pkg-config.ac])
SHAR_EOF
(set 20 03 02 02 11 39 34 'toppkg/subpkg/configure.ac'; eval
"$shar_touch") &&
chmod 0644 'toppkg/subpkg/configure.ac' ||
$echo 'restore of' 'toppkg/subpkg/configure.ac' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'toppkg/subpkg/configure.ac:' 'MD5 check failed'
eea91a65dd310d070c6b2e32e949c6aa toppkg/subpkg/configure.ac
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c <
'toppkg/subpkg/configure.ac'`"
test 254 -eq "$shar_count" ||
$echo 'toppkg/subpkg/configure.ac:' 'original size' '254,' 'current
size' "$shar_count!"
fi
fi
# ============= toppkg/subpkg/Makefile.am ==============
if test -f 'toppkg/subpkg/Makefile.am' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'toppkg/subpkg/Makefile.am' '(file already exists)'
else
$echo 'x -' extracting 'toppkg/subpkg/Makefile.am' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'toppkg/subpkg/Makefile.am' &&
## Process this file with automake to produce Makefile.in
X
X
bin_SCRIPTS = @address@hidden
X~
SHAR_EOF
(set 20 03 02 02 06 56 34 'toppkg/subpkg/Makefile.am'; eval
"$shar_touch") &&
chmod 0644 'toppkg/subpkg/Makefile.am' ||
$echo 'restore of' 'toppkg/subpkg/Makefile.am' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'toppkg/subpkg/Makefile.am:' 'MD5 check failed'
44b60275b4893c8795982ea6d44e5396 toppkg/subpkg/Makefile.am
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c <
'toppkg/subpkg/Makefile.am'`"
test 104 -eq "$shar_count" ||
$echo 'toppkg/subpkg/Makefile.am:' 'original size' '104,' 'current
size' "$shar_count!"
fi
fi
# ============= toppkg/subpkg/pkg-config.ac ==============
if test -f 'toppkg/subpkg/pkg-config.ac' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'toppkg/subpkg/pkg-config.ac' '(file already
exists)'
else
$echo 'x -' extracting 'toppkg/subpkg/pkg-config.ac' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'toppkg/subpkg/pkg-config.ac' &&
#! /bin/sh
# @configure_input@
X
usage()
{
X cat >2 <<EOF
Usage: @PACKAGE_TARNAME@ [OPTION] ...
X
Known values for OPTION are:
X
X --cppflags print pre-processor flags
X --cxx print compilation command
X --cxxflags print C++ compiler flags
X --help display this help and exit
X --ldflags print linker flags
X --libs print libraries to link against
X --prefix show installation prefix
X --version output version information
X
EOF
X exit $1
} # usage
X
X
if test $# -eq 0; then
X usage 1
fi
X
while test $# -gt 0; do
X case "$1" in
X --cppflags) echo address@hidden@ @CPPFLAGS@ ;;
X --cxx ) echo @CXX@ ;;
X --cxxflags) echo @CXXFLAGS@ ;;
X --help ) usage 0 ;;
X --ldflags ) echo @LDFLAGS@ ;;
X --libs ) echo @LIBS@ ;;
X --prefix ) echo @prefix@ ;;
X --version ) echo @PACKAGE@ @VERSION@; exit 0 ;;
X * ) usage 1 ;;
X esac
X shift
done # while
X
Xexit 0
SHAR_EOF
(set 20 03 02 02 06 16 53 'toppkg/subpkg/pkg-config.ac'; eval
"$shar_touch") &&
chmod 0755 'toppkg/subpkg/pkg-config.ac' ||
$echo 'restore of' 'toppkg/subpkg/pkg-config.ac' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'toppkg/subpkg/pkg-config.ac:' 'MD5 check failed'
12f95eb38459c43259b37391d74d5396 toppkg/subpkg/pkg-config.ac
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c <
'toppkg/subpkg/pkg-config.ac'`"
test 1051 -eq "$shar_count" ||
$echo 'toppkg/subpkg/pkg-config.ac:' 'original size' '1051,' 'current
size' "$shar_count!"
fi
fi
rm -fr _sh01548
exit 0