Re: [Xlog-discussion] Sweepstakes Cabrillo?

[John]

This turned out to be very easy. When I recorded QSOs I omitted the 
calls from the RST field, figuring I'd have to add them later (as 
described below). But I discovered that the ARRL Cabrillo format does 
not include the station's call (redundant anyway) in the exchange material.

Haven't tried the Cabrillo log on the robot yet, but I think it's OK and 
only took maybe 15 minutes, exporting from Xlog and doing a bit of 
editing in Kate.

--John K3GHH

On 11/02/13 22:15, John wrote:
> Thanks, Pete... I've reconciled myself to having to do a TSV export 
> and shift spreadsheet columns around, then save as a txt file. 
> Probably still have to do some find-replaces in Kate.
>
> --John K3GHH
>
> On 11/02/13 20:54, Pete Spotts wrote:
> > On Sat, 02 Nov 2013 19:34:48 +0000
> > John <address@hidden> wrote:
> >
> > > Xlog's RST fields, from which its Cabrillo log is extracted, seem
> > > limited to 15 characters, but the ARRL Sweepstakes exchange (e.g.
> > > 1821 B WA3QRT 77 NTX) could easily exceed that. How does one cope
> > > with that? Got about 1.5 hours to figure it out!
> > >
> > > --John K3GHH
> > >
> > > _______________________________________________
> > > Xlog-discussion mailing list
> > > address@hidden
> > > https://lists.nongnu.org/mailman/listinfo/xlog-discussion
> > Can you use the QTH Field for section abbrev, and set up one of the two
> > custom field for ck number? Can Cabrillo export pick up the QSO number
> > as the serial number?
> >
> > With best regards,
> >
> > Pete
>
>
> _______________________________________________
> Xlog-discussion mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/xlog-discussion