Re: [Xlog-discussion] Cwdaemon

[John]

On 09/23/2013 03:54 PM, Ed wrote:
> On 09/23/2013 11:40 AM, John wrote:
> > Still trying... on fresh cold boots the last two mornings, "ps -A" shows
> > no cwdaemon running. (Everybody probably knows this, but I had to try it
> > anyway: starting Xlog does not start cwdaemon.) I started cwdaemon  with
> > "sudo /usr/sbin ./cwdaemon". Another "ps -A" then shows it running.
> > Xlog's keyer continues not to function.
>
>
> Have you checked your bios to make sure the parallel port is 
> configured correctly ? If not, cwdaemon may not run.
>
> Ed W3NR
Thank you for your patience, Ed. Yes, I checked that a couple of days 
ago, and as far as I can tell, it looks OK. From the BIOS notes I took: 
Par port adr: 378; Mode ECP; IRQ7; DMA channel DMA3.

There is nothing actually plugged into the parallel port because I 
haven't  yet fabricated the transceiver cable. I didn't figure that 
would keep the daemon from producing a sidetone.